From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <kishon@ti.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 03/51] phy: sun4i: add support for A64 usb phy
Date: Wed, 14 Sep 2016 13:13:44 +0530 [thread overview]
Message-ID: <1473839072-5673-4-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1473839072-5673-1-git-send-email-kishon@ti.com>
From: Icenowy Zheng <icenowy@aosc.xyz>
There's something unknown in the pmu part that shared with H3.
It's renamed as PMU_UNK1 from PMU_UNK_H3.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-sun4i-usb.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 8c7eb33..fcf4d95 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -50,7 +50,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_UNK_H3 0x20
-#define REG_PMU_UNK_H3 0x10
+#define REG_PMU_UNK1 0x10
#define PHYCTL_DATA BIT(7)
@@ -98,6 +98,7 @@ enum sun4i_usb_phy_type {
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
+ sun50i_a64_phy,
};
struct sun4i_usb_phy_cfg {
@@ -106,6 +107,7 @@ struct sun4i_usb_phy_cfg {
u32 disc_thresh;
u8 phyctl_offset;
bool dedicated_clocks;
+ bool enable_pmu_unk1;
};
struct sun4i_usb_phy_data {
@@ -183,8 +185,9 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
mutex_lock(&phy_data->mutex);
- if (phy_data->cfg->type == sun8i_a33_phy) {
- /* A33 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->type == sun8i_a33_phy ||
+ phy_data->cfg->type == sun50i_a64_phy) {
+ /* A33 or A64 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
@@ -258,14 +261,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (data->cfg->enable_pmu_unk1) {
+ val = readl(phy->pmu + REG_PMU_UNK1);
+ writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+ }
+
if (data->cfg->type == sun8i_h3_phy) {
if (phy->index == 0) {
val = readl(data->base + REG_PHY_UNK_H3);
writel(val & ~1, data->base + REG_PHY_UNK_H3);
}
-
- val = readl(phy->pmu + REG_PMU_UNK_H3);
- writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
} else {
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
@@ -737,6 +742,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -745,6 +751,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -753,6 +760,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -761,6 +769,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -769,6 +778,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -777,6 +787,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@@ -784,6 +795,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.type = sun8i_h3_phy,
.disc_thresh = 3,
.dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+ .num_phys = 2,
+ .type = sun50i_a64_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .dedicated_clocks = true,
+ .enable_pmu_unk1 = true,
};
static const struct of_device_id sun4i_usb_phy_of_match[] = {
@@ -794,6 +815,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+ { .compatible = "allwinner,sun50i-a64-usb-phy",
+ .data = &sun50i_a64_cfg},
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
--
1.7.9.5
next prev parent reply other threads:[~2016-09-14 7:56 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-14 7:43 [GIT PULL] phy: for 4.9 Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 01/51] phy: exynos5-usbdrd: Remove "static" from local variable Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 02/51] dt: bindings: add bindings for Allwinner A64 usb phy Kishon Vijay Abraham I
2016-09-14 7:43 ` Kishon Vijay Abraham I [this message]
2016-09-14 7:43 ` [PATCH 04/51] phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 05/51] phy: qcom-ufs: use of_property_read_bool Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 06/51] Documentation: bindings: add DT documentation for Rockchip USB2PHY Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 07/51] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 08/51] Documentation: bindings: add dt documentation for Rockchip PCIe PHY Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 09/51] phy: add a driver for the Rockchip SoC internal " Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 10/51] phy: tegra: add missing header dependencies Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 11/51] phy: tegra: mark tegra_xusb_lane_lookup_function() static Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 12/51] phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 13/51] phy: bcm-ns2-pcie: Set missing .owner field in ns2_pci_phy_ops Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 14/51] phy: rcar-gen3-usb2: revise the example of device tree doc Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 15/51] phy: rcar-gen3-usb2: Add a compatible string for r8a7796 Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 16/51] phy: omap-usb2: support suspend/resume Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 17/51] dt-bindings: phy: ti: add documentation for ti,dra7x-usb2 Kishon Vijay Abraham I
2016-09-14 7:43 ` [PATCH 18/51] phy: rockchip-inno-usb2: add COMMON_CLK dependency Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 19/51] extcon: adc-jack: update cable state during boot Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 20/51] extcon: Move extcon_get_edev_by_phandle() errors to dbg level Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 21/51] extcon: arizona: Remove unneeded semi-colon Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 22/51] extcon: arizona: Remove the usage of extcon_update_state() Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 23/51] extcon: adc-jack: Remove the usage of extcon_set_state() Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 24/51] extcon: gpio: " Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 25/51] extcon: Remove the state_store() to prevent the wrong access Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 26/51] extcon: Block the bit masking operation for cable state except for extcon core Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 27/51] extcon: Fix compile time warning Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 28/51] extcon: Add the extcon_type to gather each connector into five category Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 29/51] extcon: Add the support for extcon property according to extcon type Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 30/51] extcon: Add the support for the capability of each property Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 31/51] extcon: Rename the extcon_set/get_state() to maintain the function naming pattern Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 32/51] extcon: Add the synchronization extcon APIs to support the notification Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 33/51] extcon: Add EXTCON_DISP_DP and the property for USB Type-C Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 34/51] extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 35/51] extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 36/51] extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 37/51] phy: da8xx-usb: Fix syscon device name Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 38/51] phy: Add USB Type-C PHY driver for rk3399 Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 39/51] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 40/51] usb: phy: add USB_SUPPORT dependency Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 41/51] phy: rockchip-typec: add pm runtime support Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 42/51] phy-sun4i-usb: Use bool where appropriate Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 43/51] phy-sun4i-usb: Refactor forced session ending Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 44/51] phy-sun4i-usb: Simplify missing dr_mode handling Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 45/51] phy-sun4i-usb: Add support for phy_set_mode Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 46/51] phy-sun4i-usb: Warn when external vbus is detected Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 47/51] phy: Add reset callback Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 48/51] phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 49/51] phy: sun4i-usb: Use spinlock to guard phyctl register access Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 50/51] phy-twl4030-usb: better handle musb_mailbox() failure Kishon Vijay Abraham I
2016-09-14 7:44 ` [PATCH 51/51] phy-twl4030-usb: initialize charging-related stuff via pm_runtime Kishon Vijay Abraham I
2016-09-15 8:38 ` [GIT PULL] phy: for 4.9 Greg KH
2016-09-15 10:22 ` Kishon Vijay Abraham I
2016-09-15 10:36 ` Greg KH
2016-09-15 10:56 ` Kishon Vijay Abraham I
2016-09-15 11:13 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473839072-5673-4-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox