linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: mhocko@suse.com, js1304@gmail.com, vbabka@suse.cz,
	mgorman@suse.de, minchan@kernel.org, akpm@linux-foundation.org,
	aneesh.kumar@linux.vnet.ibm.com, bsingharora@gmail.com
Subject: [RFC 8/8] mm: Add N_COHERENT_DEVICE node type into node_states[]
Date: Mon, 24 Oct 2016 10:01:57 +0530	[thread overview]
Message-ID: <1477283517-2504-9-git-send-email-khandual@linux.vnet.ibm.com> (raw)
In-Reply-To: <1477283517-2504-1-git-send-email-khandual@linux.vnet.ibm.com>

Add a new member N_COHERENT_DEVICE into node_states[] nodemask array to
enlist all those nodes which contain only coherent device memory. Also
creates a new sysfs interface /sys/devices/system/node/is_coherent_device
to list down all those nodes which has coherent device memory.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
 Documentation/ABI/stable/sysfs-devices-node |  7 +++++++
 drivers/base/node.c                         |  6 ++++++
 include/linux/nodemask.h                    |  3 +++
 mm/memory_hotplug.c                         | 10 ++++++++++
 4 files changed, 26 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index 5b2d0f0..5538791 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -29,6 +29,13 @@ Description:
 		Nodes that have regular or high memory.
 		Depends on CONFIG_HIGHMEM.
 
+What:		/sys/devices/system/node/is_coherent_device
+Date:		October 2016
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Lists the nodemask of nodes that have coherent memory.
+		Depends on CONFIG_COHERENT_DEVICE.
+
 What:		/sys/devices/system/node/nodeX
 Date:		October 2002
 Contact:	Linux Memory Management list <linux-mm@kvack.org>
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 5548f96..5b5dd89 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -661,6 +661,9 @@ static struct node_attr node_state_attr[] = {
 	[N_MEMORY] = _NODE_ATTR(has_memory, N_MEMORY),
 #endif
 	[N_CPU] = _NODE_ATTR(has_cpu, N_CPU),
+#ifdef CONFIG_COHERENT_DEVICE
+	[N_COHERENT_DEVICE] = _NODE_ATTR(is_coherent_device, N_COHERENT_DEVICE),
+#endif
 };
 
 static struct attribute *node_state_attrs[] = {
@@ -674,6 +677,9 @@ static struct attribute *node_state_attrs[] = {
 	&node_state_attr[N_MEMORY].attr.attr,
 #endif
 	&node_state_attr[N_CPU].attr.attr,
+#ifdef CONFIG_COHERENT_DEVICE
+	&node_state_attr[N_COHERENT_DEVICE].attr.attr,
+#endif
 	NULL
 };
 
diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h
index f746e44..605cb0d 100644
--- a/include/linux/nodemask.h
+++ b/include/linux/nodemask.h
@@ -393,6 +393,9 @@ enum node_states {
 	N_MEMORY = N_HIGH_MEMORY,
 #endif
 	N_CPU,		/* The node has one or more cpus */
+#ifdef CONFIG_COHERENT_DEVICE
+	N_COHERENT_DEVICE,	/* The node has coherent device memory */
+#endif
 	NR_NODE_STATES
 };
 
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9629273..8f03962 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1044,6 +1044,11 @@ static void node_states_set_node(int node, struct memory_notify *arg)
 	if (arg->status_change_nid_high >= 0)
 		node_set_state(node, N_HIGH_MEMORY);
 
+#ifdef CONFIG_COHERENT_DEVICE
+	if (isolated_cdm_node(node))
+		node_set_state(node, N_COHERENT_DEVICE);
+#endif
+
 	node_set_state(node, N_MEMORY);
 }
 
@@ -1858,6 +1863,11 @@ static void node_states_clear_node(int node, struct memory_notify *arg)
 	if ((N_MEMORY != N_HIGH_MEMORY) &&
 	    (arg->status_change_nid >= 0))
 		node_clear_state(node, N_MEMORY);
+
+#ifdef CONFIG_COHERENT_DEVICE
+	if (isolated_cdm_node(node))
+		node_clear_state(node, N_COHERENT_DEVICE);
+#endif
 }
 
 static int __ref __offline_pages(unsigned long start_pfn,
-- 
2.1.0

  parent reply	other threads:[~2016-10-24  4:32 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-24  4:31 [RFC 0/8] Define coherent device memory node Anshuman Khandual
2016-10-24  4:31 ` [RFC 1/8] mm: " Anshuman Khandual
2016-10-24 17:09   ` Dave Hansen
2016-10-25  1:22     ` Anshuman Khandual
2016-10-25 15:47       ` Dave Hansen
2016-10-24  4:31 ` [RFC 2/8] mm: Add specialized fallback zonelist for coherent device memory nodes Anshuman Khandual
2016-10-24 17:10   ` Dave Hansen
2016-10-25  1:27     ` Anshuman Khandual
2016-11-17  7:40   ` Anshuman Khandual
2016-11-17  7:59     ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask Anshuman Khandual
2016-11-17  7:59       ` [DRAFT 2/2] mm/hugetlb: Restrict HugeTLB allocations only to the system RAM nodes Anshuman Khandual
2016-11-17  8:28       ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask kbuild test robot
2016-10-24  4:31 ` [RFC 3/8] mm: Isolate coherent device memory nodes from HugeTLB allocation paths Anshuman Khandual
2016-10-24 17:16   ` Dave Hansen
2016-10-25  4:15     ` Aneesh Kumar K.V
2016-10-25  7:17       ` Balbir Singh
2016-10-25  7:25         ` Balbir Singh
2016-10-24  4:31 ` [RFC 4/8] mm: Accommodate coherent device memory nodes in MPOL_BIND implementation Anshuman Khandual
2016-10-24  4:31 ` [RFC 5/8] mm: Add new flag VM_CDM for coherent device memory Anshuman Khandual
2016-10-24 17:38   ` Dave Hansen
2016-10-24 18:00     ` Dave Hansen
2016-10-25 12:36     ` Balbir Singh
2016-10-25 19:20     ` Aneesh Kumar K.V
2016-10-25 20:01       ` Dave Hansen
2016-10-24  4:31 ` [RFC 6/8] mm: Make VM_CDM marked VMAs non migratable Anshuman Khandual
2016-10-24  4:31 ` [RFC 7/8] mm: Add a new migration function migrate_virtual_range() Anshuman Khandual
2016-10-24  4:31 ` Anshuman Khandual [this message]
2016-10-25  7:22   ` [RFC 8/8] mm: Add N_COHERENT_DEVICE node type into node_states[] Balbir Singh
2016-10-26  4:52     ` Anshuman Khandual
2016-10-24  4:42 ` [DEBUG 00/10] Test and debug patches for coherent device memory Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 01/10] dt-bindings: Add doc for ibm,hotplug-aperture Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 02/10] powerpc/mm: Create numa nodes for hotplug memory Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 03/10] powerpc/mm: Allow memory hotplug into a memory less node Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 04/10] mm: Enable CONFIG_MOVABLE_NODE on powerpc Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 05/10] powerpc/mm: Identify isolation seeking coherent memory nodes during boot Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 06/10] mm: Export definition of 'zone_names' array through mmzone.h Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 07/10] mm: Add debugfs interface to dump each node's zonelist information Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 08/10] powerpc: Enable CONFIG_MOVABLE_NODE for PPC64 platform Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 09/10] drivers: Add two drivers for coherent device memory tests Anshuman Khandual
2016-10-24  4:42   ` [DEBUG 10/10] test: Add a script to perform random VMA migrations across nodes Anshuman Khandual
2016-10-24 17:09 ` [RFC 0/8] Define coherent device memory node Jerome Glisse
2016-10-25  4:26   ` Aneesh Kumar K.V
2016-10-25 15:16     ` Jerome Glisse
2016-10-26 11:09       ` Aneesh Kumar K.V
2016-10-26 16:07         ` Jerome Glisse
2016-10-28  5:29           ` Aneesh Kumar K.V
2016-10-28 16:16             ` Jerome Glisse
2016-11-05  5:21     ` Anshuman Khandual
2016-11-05 18:02       ` Jerome Glisse
2016-10-25  4:59   ` Aneesh Kumar K.V
2016-10-25 15:32     ` Jerome Glisse
2016-10-25 17:31       ` Aneesh Kumar K.V
2016-10-25 18:52         ` Jerome Glisse
2016-10-26 11:13           ` Anshuman Khandual
2016-10-26 16:02             ` Jerome Glisse
2016-10-27  4:38               ` Anshuman Khandual
2016-10-27  7:03                 ` Anshuman Khandual
2016-10-27 15:05                   ` Jerome Glisse
2016-10-28  5:47                     ` Anshuman Khandual
2016-10-28 16:08                       ` Jerome Glisse
2016-10-26 12:56           ` Anshuman Khandual
2016-10-26 16:28             ` Jerome Glisse
2016-10-27 10:23               ` Balbir Singh
2016-10-25 12:07   ` Balbir Singh
2016-10-25 15:21     ` Jerome Glisse
2016-10-24 18:04 ` Dave Hansen
2016-10-24 18:32   ` David Nellans
2016-10-24 19:36     ` Dave Hansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477283517-2504-9-git-send-email-khandual@linux.vnet.ibm.com \
    --to=khandual@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=bsingharora@gmail.com \
    --cc=js1304@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).