From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: mhocko@suse.com, js1304@gmail.com, vbabka@suse.cz,
mgorman@suse.de, minchan@kernel.org, akpm@linux-foundation.org,
aneesh.kumar@linux.vnet.ibm.com, bsingharora@gmail.com
Subject: [DEBUG 05/10] powerpc/mm: Identify isolation seeking coherent memory nodes during boot
Date: Mon, 24 Oct 2016 10:12:24 +0530 [thread overview]
Message-ID: <1477284149-2976-6-git-send-email-khandual@linux.vnet.ibm.com> (raw)
In-Reply-To: <1477284149-2976-1-git-send-email-khandual@linux.vnet.ibm.com>
Isolation seeking coherent memory nodes which wish to be MNODE_ISOLATION
in core VM will have "ibm,hotplug-aperture" as one of the compatible
properties in their respective device nodes in device tree. Detect them
during platform NUMA initialization and mark their respective coherent
mask in pglist_data structure as MNODE_ISOLATION.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
---
arch/powerpc/mm/numa.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 5010181..89ae64c 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -64,6 +64,7 @@ static int form1_affinity;
static int distance_ref_points_depth;
static const __be32 *distance_ref_points;
static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS];
+static int node_to_phys_device_map[MAX_NUMNODES];
/*
* Allocate node_to_cpumask_map based on number of available nodes
@@ -714,6 +715,17 @@ static const struct of_device_id memory_match[] = {
{ /* sentinel */ }
};
+int arch_get_memory_phys_device(unsigned long start_pfn)
+{
+ return node_to_phys_device_map[pfn_to_nid(start_pfn)];
+}
+
+int special_mem_node(int nid)
+{
+ return node_to_phys_device_map[nid];
+}
+EXPORT_SYMBOL(special_mem_node);
+
static int __init parse_numa_properties(void)
{
struct device_node *memory;
@@ -789,6 +801,9 @@ static int __init parse_numa_properties(void)
if (nid < 0)
nid = default_nid;
+ if (of_device_is_compatible(memory, "ibm,hotplug-aperture"))
+ node_to_phys_device_map[nid] = 1;
+
fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid);
node_set_online(nid);
@@ -908,6 +923,11 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
NODE_DATA(nid)->node_id = nid;
NODE_DATA(nid)->node_start_pfn = start_pfn;
NODE_DATA(nid)->node_spanned_pages = spanned_pages;
+
+#ifdef CONFIG_COHERENT_DEVICE
+ if (special_mem_node(nid))
+ set_cdm_isolation(nid);
+#endif
}
void __init initmem_init(void)
--
2.1.0
next prev parent reply other threads:[~2016-10-24 4:43 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-24 4:31 [RFC 0/8] Define coherent device memory node Anshuman Khandual
2016-10-24 4:31 ` [RFC 1/8] mm: " Anshuman Khandual
2016-10-24 17:09 ` Dave Hansen
2016-10-25 1:22 ` Anshuman Khandual
2016-10-25 15:47 ` Dave Hansen
2016-10-24 4:31 ` [RFC 2/8] mm: Add specialized fallback zonelist for coherent device memory nodes Anshuman Khandual
2016-10-24 17:10 ` Dave Hansen
2016-10-25 1:27 ` Anshuman Khandual
2016-11-17 7:40 ` Anshuman Khandual
2016-11-17 7:59 ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask Anshuman Khandual
2016-11-17 7:59 ` [DRAFT 2/2] mm/hugetlb: Restrict HugeTLB allocations only to the system RAM nodes Anshuman Khandual
2016-11-17 8:28 ` [DRAFT 1/2] mm/cpuset: Exclude CDM nodes from each task's mems_allowed node mask kbuild test robot
2016-10-24 4:31 ` [RFC 3/8] mm: Isolate coherent device memory nodes from HugeTLB allocation paths Anshuman Khandual
2016-10-24 17:16 ` Dave Hansen
2016-10-25 4:15 ` Aneesh Kumar K.V
2016-10-25 7:17 ` Balbir Singh
2016-10-25 7:25 ` Balbir Singh
2016-10-24 4:31 ` [RFC 4/8] mm: Accommodate coherent device memory nodes in MPOL_BIND implementation Anshuman Khandual
2016-10-24 4:31 ` [RFC 5/8] mm: Add new flag VM_CDM for coherent device memory Anshuman Khandual
2016-10-24 17:38 ` Dave Hansen
2016-10-24 18:00 ` Dave Hansen
2016-10-25 12:36 ` Balbir Singh
2016-10-25 19:20 ` Aneesh Kumar K.V
2016-10-25 20:01 ` Dave Hansen
2016-10-24 4:31 ` [RFC 6/8] mm: Make VM_CDM marked VMAs non migratable Anshuman Khandual
2016-10-24 4:31 ` [RFC 7/8] mm: Add a new migration function migrate_virtual_range() Anshuman Khandual
2016-10-24 4:31 ` [RFC 8/8] mm: Add N_COHERENT_DEVICE node type into node_states[] Anshuman Khandual
2016-10-25 7:22 ` Balbir Singh
2016-10-26 4:52 ` Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 00/10] Test and debug patches for coherent device memory Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 01/10] dt-bindings: Add doc for ibm,hotplug-aperture Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 02/10] powerpc/mm: Create numa nodes for hotplug memory Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 03/10] powerpc/mm: Allow memory hotplug into a memory less node Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 04/10] mm: Enable CONFIG_MOVABLE_NODE on powerpc Anshuman Khandual
2016-10-24 4:42 ` Anshuman Khandual [this message]
2016-10-24 4:42 ` [DEBUG 06/10] mm: Export definition of 'zone_names' array through mmzone.h Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 07/10] mm: Add debugfs interface to dump each node's zonelist information Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 08/10] powerpc: Enable CONFIG_MOVABLE_NODE for PPC64 platform Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 09/10] drivers: Add two drivers for coherent device memory tests Anshuman Khandual
2016-10-24 4:42 ` [DEBUG 10/10] test: Add a script to perform random VMA migrations across nodes Anshuman Khandual
2016-10-24 17:09 ` [RFC 0/8] Define coherent device memory node Jerome Glisse
2016-10-25 4:26 ` Aneesh Kumar K.V
2016-10-25 15:16 ` Jerome Glisse
2016-10-26 11:09 ` Aneesh Kumar K.V
2016-10-26 16:07 ` Jerome Glisse
2016-10-28 5:29 ` Aneesh Kumar K.V
2016-10-28 16:16 ` Jerome Glisse
2016-11-05 5:21 ` Anshuman Khandual
2016-11-05 18:02 ` Jerome Glisse
2016-10-25 4:59 ` Aneesh Kumar K.V
2016-10-25 15:32 ` Jerome Glisse
2016-10-25 17:31 ` Aneesh Kumar K.V
2016-10-25 18:52 ` Jerome Glisse
2016-10-26 11:13 ` Anshuman Khandual
2016-10-26 16:02 ` Jerome Glisse
2016-10-27 4:38 ` Anshuman Khandual
2016-10-27 7:03 ` Anshuman Khandual
2016-10-27 15:05 ` Jerome Glisse
2016-10-28 5:47 ` Anshuman Khandual
2016-10-28 16:08 ` Jerome Glisse
2016-10-26 12:56 ` Anshuman Khandual
2016-10-26 16:28 ` Jerome Glisse
2016-10-27 10:23 ` Balbir Singh
2016-10-25 12:07 ` Balbir Singh
2016-10-25 15:21 ` Jerome Glisse
2016-10-24 18:04 ` Dave Hansen
2016-10-24 18:32 ` David Nellans
2016-10-24 19:36 ` Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477284149-2976-6-git-send-email-khandual@linux.vnet.ibm.com \
--to=khandual@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=bsingharora@gmail.com \
--cc=js1304@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@suse.com \
--cc=minchan@kernel.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).