[PATCH v2] ARC: [plat-eznps] set default baud for early console

[PATCH v2] ARC: [plat-eznps] set default baud for early console

[Noam Camus]

From: Noam Camus <noamca@mellanox.com>

For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC
The early console driver uses BASE_BAUD and not using dtb.

The default of 50MHz is NOT good for NPS SoC.

Signed-off-by: Noam Camus <noamca@mellanox.com>
---
 arch/arc/kernel/devtree.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index f1e07c2..3b67f53 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
 		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x) */
+	else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
+		arc_base_baud = 800000000;      /* Fixed 800MHz clk (NPS) */
 	else
 		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }
-- 
1.7.1

Re: [PATCH v2] ARC: [plat-eznps] set default baud for early console

[Alexey Brodkin]

Hi Noam,

On Tue, 2016-11-08 at 15:20 +0200, Noam Camus wrote:
> From: Noam Camus <noamca@mellanox.com>
> 
> For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC
> The early console driver uses BASE_BAUD and not using dtb.
> 
> The default of 50MHz is NOT good for NPS SoC.
> 
> Signed-off-by: Noam Camus <noamca@mellanox.com>

Could you please provide a changelog (v1 -> v2) so reviewers
may have a hint about changes you made if any.

Regards,
Alexey

RE: [PATCH v2] ARC: [plat-eznps] set default baud for early console

[Noam Camus]

> From: Alexey Brodkin [mailto:Alexey.Brodkin@synopsys.com] 
> Sent: Tuesday, November 8, 2016 4:08 PM

>Could you please provide a changelog (v1 -> v2) so reviewers may have a hint about changes you made if any.
... Just fix some typos in log
This line somehow was removed from patch while sending (It is at patch head followed by line with ---)
Basically in V1 I wrote that default value is good while I meant is NOT good (fixed in V2).

Thanks,
Noam

Re: [PATCH v2] ARC: [plat-eznps] set default baud for early console

[Alexey Brodkin]

Hi Noam,

On Tue, 2016-11-08 at 14:13 +0000, Noam Camus wrote:
> > 
> > From: Alexey Brodkin [mailto:Alexey.Brodkin@synopsys.com] 
> > Sent: Tuesday, November 8, 2016 4:08 PM
> 
> > 
> > Could you please provide a changelog (v1 -> v2) so reviewers may have a hint about changes you made if any.
> ... Just fix some typos in log
> This line somehow was removed from patch while sending (It is at patch head followed by line with ---)
> Basically in V1 I wrote that default value is good while I meant is NOT good (fixed in V2).

Thanks for explanation.
IMHO it worth adding that kind of changelog on each next iteration so
please keep it in mind next time :)

-Alexey