From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754219AbcKIPDY (ORCPT ); Wed, 9 Nov 2016 10:03:24 -0500 Received: from mga06.intel.com ([134.134.136.31]:29423 "EHLO mga06.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753396AbcKIPCw (ORCPT ); Wed, 9 Nov 2016 10:02:52 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.31,614,1473145200"; d="scan'208";a="29331243" From: Jacob Pan To: LKML , Zhang Rui Cc: eric.ernst@linux.intel.com, Linux PM , Rafael Wysocki , Greg Kroah-Hartman , Jacob Pan Subject: [PATCH] thermal/powerclamp: add back module device table Date: Wed, 9 Nov 2016 07:01:01 -0800 Message-Id: <1478703661-10875-1-git-send-email-jacob.jun.pan@linux.intel.com> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module cpu id table with a cpu feature check, which is logically correct. But we need the module device table to allow module auto loading. --- drivers/thermal/intel_powerclamp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index f0bad48..c82b41f 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -694,9 +694,16 @@ static int powerclamp_set_cur_state(struct thermal_cooling_device *cdev, .set_cur_state = powerclamp_set_cur_state, }; +static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = { + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids); + static int __init powerclamp_probe(void) { - if (!boot_cpu_has(X86_FEATURE_MWAIT)) { + + if (!x86_match_cpu(intel_powerclamp_ids)) { pr_err("CPU does not support MWAIT"); return -ENODEV; } -- 1.9.1