From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <patches@opensource.wolfsonmicro.com>
Subject: [PATCH v2 1/3] mfd: arizona: Correctly clean up after IRQs
Date: Mon, 14 Nov 2016 17:15:55 +0000 [thread overview]
Message-ID: <1479143757-30531-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
Currently we leak a lot of things when tearing down the IRQs this patch
fixes this cleaning up both the IRQ mappings and the IRQ domain itself.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Changes since v1:
- Correct handling of ret and error messages from irq_create_mapping
Thanks,
Charles
drivers/mfd/arizona-irq.c | 54 +++++++++++++++++++++++++++++++++++------------
1 file changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 2e01975..bc3b342 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -207,6 +207,7 @@ int arizona_irq_init(struct arizona *arizona)
int ret, i;
const struct regmap_irq_chip *aod, *irq;
struct irq_data *irq_data;
+ unsigned int virq;
arizona->ctrlif_error = true;
@@ -318,24 +319,34 @@ int arizona_irq_init(struct arizona *arizona)
}
if (aod) {
- ret = regmap_add_irq_chip(arizona->regmap,
- irq_create_mapping(arizona->virq, 0),
- IRQF_ONESHOT, 0, aod,
- &arizona->aod_irq_chip);
+ virq = irq_create_mapping(arizona->virq, 0);
+ if (!virq) {
+ dev_err(arizona->dev, "Failed to map AOD IRQs\n");
+ ret = -EINVAL;
+ goto err_domain;
+ }
+
+ ret = regmap_add_irq_chip(arizona->regmap, virq, IRQF_ONESHOT,
+ 0, aod, &arizona->aod_irq_chip);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to add AOD IRQs: %d\n", ret);
- goto err;
+ goto err_map_aod;
}
}
- ret = regmap_add_irq_chip(arizona->regmap,
- irq_create_mapping(arizona->virq, 1),
- IRQF_ONESHOT, 0, irq,
- &arizona->irq_chip);
+ virq = irq_create_mapping(arizona->virq, 1);
+ if (!virq) {
+ dev_err(arizona->dev, "Failed to map main IRQs\n");
+ ret = -EINVAL;
+ goto err_aod;
+ }
+
+ ret = regmap_add_irq_chip(arizona->regmap, virq, IRQF_ONESHOT,
+ 0, irq, &arizona->irq_chip);
if (ret != 0) {
dev_err(arizona->dev, "Failed to add main IRQs: %d\n", ret);
- goto err_aod;
+ goto err_map_main_irq;
}
/* Used to emulate edge trigger and to work around broken pinmux */
@@ -400,23 +411,38 @@ int arizona_irq_init(struct arizona *arizona)
err_main_irq:
regmap_del_irq_chip(irq_find_mapping(arizona->virq, 1),
arizona->irq_chip);
+err_map_main_irq:
+ irq_dispose_mapping(irq_find_mapping(arizona->virq, 1));
err_aod:
regmap_del_irq_chip(irq_find_mapping(arizona->virq, 0),
arizona->aod_irq_chip);
+err_map_aod:
+ irq_dispose_mapping(irq_find_mapping(arizona->virq, 0));
+err_domain:
+ irq_domain_remove(arizona->virq);
err:
return ret;
}
int arizona_irq_exit(struct arizona *arizona)
{
+ unsigned int virq;
+
if (arizona->ctrlif_error)
free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR),
arizona);
free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE), arizona);
- regmap_del_irq_chip(irq_find_mapping(arizona->virq, 1),
- arizona->irq_chip);
- regmap_del_irq_chip(irq_find_mapping(arizona->virq, 0),
- arizona->aod_irq_chip);
+
+ virq = irq_find_mapping(arizona->virq, 1);
+ regmap_del_irq_chip(virq, arizona->irq_chip);
+ irq_dispose_mapping(virq);
+
+ virq = irq_find_mapping(arizona->virq, 0);
+ regmap_del_irq_chip(virq, arizona->aod_irq_chip);
+ irq_dispose_mapping(virq);
+
+ irq_domain_remove(arizona->virq);
+
free_irq(arizona->irq, arizona);
return 0;
--
2.1.4
next reply other threads:[~2016-11-14 17:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-14 17:15 Charles Keepax [this message]
2016-11-14 17:15 ` [PATCH 2/3] mfd: arizona: Disable IRQs during driver remove Charles Keepax
2016-11-22 12:59 ` Lee Jones
2016-11-14 17:15 ` [PATCH 3/3] mfd: arizona: Use arizona_map_irq instead of hard coding it Charles Keepax
2016-11-22 13:01 ` Lee Jones
2016-11-22 15:54 ` Lee Jones
2016-11-22 16:07 ` Charles Keepax
2016-11-22 12:57 ` [PATCH v2 1/3] mfd: arizona: Correctly clean up after IRQs Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479143757-30531-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox