* [PATCH] clk: qoriq: added ls1012a clock configuration
@ 2016-11-16 5:58 yuantian.tang
2016-11-16 6:54 ` Scott Wood
0 siblings, 1 reply; 4+ messages in thread
From: yuantian.tang @ 2016-11-16 5:58 UTC (permalink / raw)
To: mturquette
Cc: sboyd, linux-clk, linux-kernel, scott.wood, linux-arm-kernel,
Tang Yuantian, Tang Yuantian
From: Tang Yuantian <Yuantian.Tang@nxp.com>
Added ls1012a clock configuation information.
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
drivers/clk/clk-qoriq.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 1bece0f..563d874 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -202,6 +202,14 @@ static const struct clockgen_muxinfo ls1021a_cmux = {
}
};
+static const struct clockgen_muxinfo ls1012a_cmux = {
+ {
+ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+ {},
+ [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+ }
+};
+
static const struct clockgen_muxinfo t1040_cmux = {
{
[0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
@@ -482,6 +490,16 @@ static const struct clockgen_chipinfo chipinfo[] = {
.pll_mask = 0x03,
},
{
+ .compat = "fsl,ls1012a-clockgen",
+ .cmux_groups = {
+ &ls1012a_cmux
+ },
+ .cmux_to_group = {
+ 0, -1
+ },
+ .pll_mask = 0x03,
+ },
+ {
.compat = "fsl,ls1043a-clockgen",
.init_periph = t2080_init_periph,
.cmux_groups = {
@@ -1284,6 +1302,7 @@ CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
/* Legacy nodes */
CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] clk: qoriq: added ls1012a clock configuration
2016-11-16 5:58 [PATCH] clk: qoriq: added ls1012a clock configuration yuantian.tang
@ 2016-11-16 6:54 ` Scott Wood
2016-11-22 8:20 ` Y.T. Tang
0 siblings, 1 reply; 4+ messages in thread
From: Scott Wood @ 2016-11-16 6:54 UTC (permalink / raw)
To: yuantian.tang, mturquette
Cc: sboyd, linux-kernel, scott.wood, linux-clk, linux-arm-kernel
On Wed, 2016-11-16 at 13:58 +0800, yuantian.tang@nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
>
> Added ls1012a clock configuation information.
Do we really need the same line in the changelog twice?
>
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
> drivers/clk/clk-qoriq.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
> index 1bece0f..563d874 100644
> --- a/drivers/clk/clk-qoriq.c
> +++ b/drivers/clk/clk-qoriq.c
> @@ -202,6 +202,14 @@ static const struct clockgen_muxinfo ls1021a_cmux = {
> }
> };
>
> +static const struct clockgen_muxinfo ls1012a_cmux = {
> + {
> + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
> + {},
> + [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
> + }
> +};
> +
Based on the "ls1021a_cmux" in the context it looks like this patch is
intended to apply on top of https://patchwork.kernel.org/patch/8923541/ but I
don't see any mention of that.
> static const struct clockgen_muxinfo t1040_cmux = {
> {
> [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
> @@ -482,6 +490,16 @@ static const struct clockgen_chipinfo chipinfo[] = {
> .pll_mask = 0x03,
> },
> {
> + .compat = "fsl,ls1012a-clockgen",
> + .cmux_groups = {
> + &ls1012a_cmux
> + },
> + .cmux_to_group = {
> + 0, -1
> + },
> + .pll_mask = 0x03,
> + },
> + {
> .compat = "fsl,ls1043a-clockgen",
> .init_periph = t2080_init_periph,
> .cmux_groups = {
> @@ -1284,6 +1302,7 @@ CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-
> 2.0", clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen",
> clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen",
> clockgen_init);
> CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen",
> clockgen_init);
> +CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen",
> clockgen_init);
Please keep these lists of chips sorted (or as close as you can in the case of
the cmux structs which already have some sorting issues).
-Scott
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH] clk: qoriq: added ls1012a clock configuration
2016-11-16 6:54 ` Scott Wood
@ 2016-11-22 8:20 ` Y.T. Tang
2016-11-23 7:21 ` Scott Wood
0 siblings, 1 reply; 4+ messages in thread
From: Y.T. Tang @ 2016-11-22 8:20 UTC (permalink / raw)
To: Scott Wood, mturquette@baylibre.com
Cc: sboyd@codeaurora.org, linux-kernel@vger.kernel.org, Scott Wood,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Hi Scott,
> -----Original Message-----
> From: Scott Wood [mailto:oss@buserror.net]
> Sent: Wednesday, November 16, 2016 2:54 PM
> To: Y.T. Tang <yuantian.tang@nxp.com>; mturquette@baylibre.com
> Cc: sboyd@codeaurora.org; linux-kernel@vger.kernel.org; Scott Wood
> <scott.wood@nxp.com>; linux-clk@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH] clk: qoriq: added ls1012a clock configuration
>
> On Wed, 2016-11-16 at 13:58 +0800, yuantian.tang@nxp.com wrote:
> > From: Tang Yuantian <Yuantian.Tang@nxp.com>
> >
> > Added ls1012a clock configuation information.
>
> Do we really need the same line in the changelog twice?
>
> >
> > Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> > ---
> > drivers/clk/clk-qoriq.c | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index
> > 1bece0f..563d874 100644
> > --- a/drivers/clk/clk-qoriq.c
> > +++ b/drivers/clk/clk-qoriq.c
> > @@ -202,6 +202,14 @@ static const struct clockgen_muxinfo ls1021a_cmux
> = {
> > }
> > };
> >
> > +static const struct clockgen_muxinfo ls1012a_cmux = {
> > + {
> > + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
> > + {},
> > + [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
> > + }
> > +};
> > +
>
> Based on the "ls1021a_cmux" in the context it looks like this patch is
> intended to apply on top
> of https://patchwork.kernel.org/patch/8923541/ but I don't see any mention
> of that.
>
I saw this patch had been merged already.
Regards,
Yuantian
> > static const struct clockgen_muxinfo t1040_cmux = {
> > {
> > [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, @@ -482,6
> +490,16 @@
> > static const struct clockgen_chipinfo chipinfo[] = {
> > .pll_mask = 0x03,
> > },
> > {
> > + .compat = "fsl,ls1012a-clockgen",
> > + .cmux_groups = {
> > + &ls1012a_cmux
> > + },
> > + .cmux_to_group = {
> > + 0, -1
> > + },
> > + .pll_mask = 0x03,
> > + },
> > + {
> > .compat = "fsl,ls1043a-clockgen",
> > .init_periph = t2080_init_periph,
> > .cmux_groups = {
> > @@ -1284,6 +1302,7 @@ CLK_OF_DECLARE(qoriq_clockgen_2,
> > "fsl,qoriq-clockgen- 2.0", clockgen_init);
> > CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen",
> > clockgen_init);
> > CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen",
> > clockgen_init);
> > CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen",
> > clockgen_init);
> > +CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen",
> > clockgen_init);
>
> Please keep these lists of chips sorted (or as close as you can in the case of
> the cmux structs which already have some sorting issues).
>
> -Scott
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] clk: qoriq: added ls1012a clock configuration
2016-11-22 8:20 ` Y.T. Tang
@ 2016-11-23 7:21 ` Scott Wood
0 siblings, 0 replies; 4+ messages in thread
From: Scott Wood @ 2016-11-23 7:21 UTC (permalink / raw)
To: Y.T. Tang, Scott Wood, mturquette@baylibre.com
Cc: sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
On 11/22/2016 02:20 AM, Y.T. Tang wrote:
> Hi Scott,
>
>> -----Original Message-----
>> From: Scott Wood [mailto:oss@buserror.net]
>> Sent: Wednesday, November 16, 2016 2:54 PM
>> To: Y.T. Tang <yuantian.tang@nxp.com>; mturquette@baylibre.com
>> Cc: sboyd@codeaurora.org; linux-kernel@vger.kernel.org; Scott Wood
>> <scott.wood@nxp.com>; linux-clk@vger.kernel.org; linux-arm-
>> kernel@lists.infradead.org
>> Subject: Re: [PATCH] clk: qoriq: added ls1012a clock configuration
>>
>> On Wed, 2016-11-16 at 13:58 +0800, yuantian.tang@nxp.com wrote:
>>> From: Tang Yuantian <Yuantian.Tang@nxp.com>
>>>
>>> Added ls1012a clock configuation information.
>>
>> Do we really need the same line in the changelog twice?
>>
>>>
>>> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
>>> ---
>>> drivers/clk/clk-qoriq.c | 19 +++++++++++++++++++
>>> 1 file changed, 19 insertions(+)
>>>
>>> diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index
>>> 1bece0f..563d874 100644
>>> --- a/drivers/clk/clk-qoriq.c
>>> +++ b/drivers/clk/clk-qoriq.c
>>> @@ -202,6 +202,14 @@ static const struct clockgen_muxinfo ls1021a_cmux
>> = {
>>> }
>>> };
>>>
>>> +static const struct clockgen_muxinfo ls1012a_cmux = {
>>> + {
>>> + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
>>> + {},
>>> + [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
>>> + }
>>> +};
>>> +
>>
>> Based on the "ls1021a_cmux" in the context it looks like this patch is
>> intended to apply on top
>> of https://patchwork.kernel.org/patch/8923541/ but I don't see any mention
>> of that.
>>
> I saw this patch had been merged already.
>
> Regards,
> Yuantian
I don't see it in linux-next.
-Scott
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-11-23 9:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-16 5:58 [PATCH] clk: qoriq: added ls1012a clock configuration yuantian.tang
2016-11-16 6:54 ` Scott Wood
2016-11-22 8:20 ` Y.T. Tang
2016-11-23 7:21 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox