From: Jiri Olsa <jolsa@kernel.org>
To: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: lkml <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@kernel.org>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Namhyung Kim <namhyung@kernel.org>,
David Ahern <dsahern@gmail.com>
Subject: [PATCH 2/7] tools build: Move tabs to spaces where suitable
Date: Sun, 4 Dec 2016 21:42:53 +0100 [thread overview]
Message-ID: <1480884178-8072-3-git-send-email-jolsa@kernel.org> (raw)
In-Reply-To: <1480884178-8072-1-git-send-email-jolsa@kernel.org>
We've been hit several times with Makefile bug where
line indented by tab was falsely considered as target
command.
We prevent this to use always space indentation for
everything except the target commands.
Link: http://lkml.kernel.org/n/tip-hxo9kg6geiw8hnyte7kgp04c@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
tools/build/Build.include | 12 ++--
tools/build/Makefile.feature | 138 +++++++++++++++++++++----------------------
tools/build/feature/Makefile | 102 ++++++++++++++++----------------
3 files changed, 126 insertions(+), 126 deletions(-)
diff --git a/tools/build/Build.include b/tools/build/Build.include
index 475152c52871..418871d02ebf 100644
--- a/tools/build/Build.include
+++ b/tools/build/Build.include
@@ -72,15 +72,15 @@ dep-cmd = $(if $(wildcard $(fixdep)),
# target, or command line has changed and update
# dependencies in the cmd file
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
-if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
- @set -e; \
- $(echo-cmd) $(cmd_$(1)); \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)); \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
###
# C flags to be used in rule definitions, includes:
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index ae52e029dd22..e3fb5ecbdcb6 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -27,58 +27,58 @@ endef
# the rule that uses them - an example for that is the 'bionic'
# feature check. ]
#
-FEATURE_TESTS_BASIC := \
- backtrace \
- dwarf \
- dwarf_getlocations \
- fortify-source \
- sync-compare-and-swap \
- glibc \
- gtk2 \
- gtk2-infobar \
- libaudit \
- libbfd \
- libelf \
- libelf-getphdrnum \
- libelf-gelf_getnote \
- libelf-getshdrstrndx \
- libelf-mmap \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libpython-version \
- libslang \
- libcrypto \
- libunwind \
- libunwind-x86 \
- libunwind-x86_64 \
- libunwind-arm \
- libunwind-aarch64 \
- pthread-attr-setaffinity-np \
- stackprotector-all \
- timerfd \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf \
- sdt
+FEATURE_TESTS_BASIC := \
+ backtrace \
+ dwarf \
+ dwarf_getlocations \
+ fortify-source \
+ sync-compare-and-swap \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-gelf_getnote \
+ libelf-getshdrstrndx \
+ libelf-mmap \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libcrypto \
+ libunwind \
+ libunwind-x86 \
+ libunwind-x86_64 \
+ libunwind-arm \
+ libunwind-aarch64 \
+ pthread-attr-setaffinity-np \
+ stackprotector-all \
+ timerfd \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf \
+ sdt
# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
# of all feature tests
-FEATURE_TESTS_EXTRA := \
- bionic \
- compile-32 \
- compile-x32 \
- cplus-demangle \
- hello \
- libbabeltrace \
- liberty \
- liberty-z \
- libunwind-debug-frame \
- libunwind-debug-frame-arm \
- libunwind-debug-frame-aarch64
+FEATURE_TESTS_EXTRA := \
+ bionic \
+ compile-32 \
+ compile-x32 \
+ cplus-demangle \
+ hello \
+ libbabeltrace \
+ liberty \
+ liberty-z \
+ libunwind-debug-frame \
+ libunwind-debug-frame-arm \
+ libunwind-debug-frame-aarch64
FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
@@ -86,26 +86,26 @@ ifeq ($(FEATURE_TESTS),all)
FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
endif
-FEATURE_DISPLAY ?= \
- dwarf \
- dwarf_getlocations \
- glibc \
- gtk2 \
- libaudit \
- libbfd \
- libelf \
- libnuma \
- numa_num_possible_cpus \
- libperl \
- libpython \
- libslang \
- libcrypto \
- libunwind \
- libdw-dwarf-unwind \
- zlib \
- lzma \
- get_cpuid \
- bpf
+FEATURE_DISPLAY ?= \
+ dwarf \
+ dwarf_getlocations \
+ glibc \
+ gtk2 \
+ libaudit \
+ libbfd \
+ libelf \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libslang \
+ libcrypto \
+ libunwind \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 8f668bce8996..c6a34c8eaa20 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -1,54 +1,54 @@
-FILES= \
- test-all.bin \
- test-backtrace.bin \
- test-bionic.bin \
- test-dwarf.bin \
- test-dwarf_getlocations.bin \
- test-fortify-source.bin \
- test-sync-compare-and-swap.bin \
- test-glibc.bin \
- test-gtk2.bin \
- test-gtk2-infobar.bin \
- test-hello.bin \
- test-libaudit.bin \
- test-libbfd.bin \
- test-liberty.bin \
- test-liberty-z.bin \
- test-cplus-demangle.bin \
- test-libelf.bin \
- test-libelf-getphdrnum.bin \
- test-libelf-gelf_getnote.bin \
- test-libelf-getshdrstrndx.bin \
- test-libelf-mmap.bin \
- test-libnuma.bin \
- test-numa_num_possible_cpus.bin \
- test-libperl.bin \
- test-libpython.bin \
- test-libpython-version.bin \
- test-libslang.bin \
- test-libcrypto.bin \
- test-libunwind.bin \
- test-libunwind-debug-frame.bin \
- test-libunwind-x86.bin \
- test-libunwind-x86_64.bin \
- test-libunwind-arm.bin \
- test-libunwind-aarch64.bin \
- test-libunwind-debug-frame-arm.bin \
- test-libunwind-debug-frame-aarch64.bin \
- test-pthread-attr-setaffinity-np.bin \
- test-stackprotector-all.bin \
- test-timerfd.bin \
- test-libdw-dwarf-unwind.bin \
- test-libbabeltrace.bin \
- test-compile-32.bin \
- test-compile-x32.bin \
- test-zlib.bin \
- test-lzma.bin \
- test-bpf.bin \
- test-get_cpuid.bin \
- test-sdt.bin \
- test-cxx.bin \
- test-jvmti.bin
+FILES= \
+ test-all.bin \
+ test-backtrace.bin \
+ test-bionic.bin \
+ test-dwarf.bin \
+ test-dwarf_getlocations.bin \
+ test-fortify-source.bin \
+ test-sync-compare-and-swap.bin \
+ test-glibc.bin \
+ test-gtk2.bin \
+ test-gtk2-infobar.bin \
+ test-hello.bin \
+ test-libaudit.bin \
+ test-libbfd.bin \
+ test-liberty.bin \
+ test-liberty-z.bin \
+ test-cplus-demangle.bin \
+ test-libelf.bin \
+ test-libelf-getphdrnum.bin \
+ test-libelf-gelf_getnote.bin \
+ test-libelf-getshdrstrndx.bin \
+ test-libelf-mmap.bin \
+ test-libnuma.bin \
+ test-numa_num_possible_cpus.bin \
+ test-libperl.bin \
+ test-libpython.bin \
+ test-libpython-version.bin \
+ test-libslang.bin \
+ test-libcrypto.bin \
+ test-libunwind.bin \
+ test-libunwind-debug-frame.bin \
+ test-libunwind-x86.bin \
+ test-libunwind-x86_64.bin \
+ test-libunwind-arm.bin \
+ test-libunwind-aarch64.bin \
+ test-libunwind-debug-frame-arm.bin \
+ test-libunwind-debug-frame-aarch64.bin \
+ test-pthread-attr-setaffinity-np.bin \
+ test-stackprotector-all.bin \
+ test-timerfd.bin \
+ test-libdw-dwarf-unwind.bin \
+ test-libbabeltrace.bin \
+ test-compile-32.bin \
+ test-compile-x32.bin \
+ test-zlib.bin \
+ test-lzma.bin \
+ test-bpf.bin \
+ test-get_cpuid.bin \
+ test-sdt.bin \
+ test-cxx.bin \
+ test-jvmti.bin
FILES := $(addprefix $(OUTPUT),$(FILES))
--
2.7.4
next prev parent reply other threads:[~2016-12-04 20:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-04 20:42 [PATCH 0/7] perf tools: Force fixdep to be built first Jiri Olsa
2016-12-04 20:42 ` [PATCH 1/7] tools build: Make the .cmd file more readable Jiri Olsa
2016-12-06 8:27 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` Jiri Olsa [this message]
2016-12-06 8:27 ` [tip:perf/core] tools build: Move tabs to spaces where suitable tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 3/7] perf tools: Move install-gtk target into rules area Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 4/7] perf tools: Move python/perf.so " Jiri Olsa
2016-12-06 8:28 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 5/7] perf tools: Force fixdep compilation at the start of the build Jiri Olsa
2016-12-05 20:02 ` Arnaldo Carvalho de Melo
2016-12-06 10:47 ` Jiri Olsa
2016-12-04 20:42 ` [PATCH 6/7] perf tools: Add non config targets Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
2016-12-04 20:42 ` [PATCH 7/7] perf tools: Cleanup build directory before each test Jiri Olsa
2016-12-06 8:29 ` [tip:perf/core] " tip-bot for Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480884178-8072-3-git-send-email-jolsa@kernel.org \
--to=jolsa@kernel.org \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@kernel.org \
--cc=dsahern@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=namhyung@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).