From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763392AbdAESz1 (ORCPT ); Thu, 5 Jan 2017 13:55:27 -0500 Received: from vern.gendns.com ([206.190.152.46]:38345 "EHLO vern.gendns.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1763397AbdAESya (ORCPT ); Thu, 5 Jan 2017 13:54:30 -0500 From: David Lechner To: Greg Kroah-Hartman , Sekhar Nori , Santosh Shilimkar Cc: David Lechner , Franklin S Cooper Jr , Rob Herring , Mark Rutland , Kevin Hilman , Axel Haslam , Alexandre Bailon , Bartosz Golaszewski , Jiri Slaby , linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 2/4] serial: 8250: Add new port type for TI DA8xx/66AK2x Date: Thu, 5 Jan 2017 12:54:18 -0600 Message-Id: <1483642460-6891-3-git-send-email-david@lechnology.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1483642460-6891-1-git-send-email-david@lechnology.com> References: <1483642460-6891-1-git-send-email-david@lechnology.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - vern.gendns.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lechnology.com X-Get-Message-Sender-Via: vern.gendns.com: authenticated_id: davidmain+lechnology.com/only user confirmed/virtual account not confirmed X-Authenticated-Sender: vern.gendns.com: davidmain@lechnology.com X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx/66AK2x. These SoCs have standard 8250 registers plus some extra non-standard registers. The UART will not function unless the non-standard Power and Emulation Management Register (PWREMU_MGMT) is configured correctly. This is currently handled in arch/arm/mach-davinci/serial.c for non-device-tree boards. Making this part of the UART driver will allow UART to work on device-tree boards as well and the mach code can eventually be removed. Signed-off-by: David Lechner Acked-by: Sekhar Nori --- v3 changes: * Changed list of SoCs to "DA8xx/66AK2x" v2 changes: * Added C66x to list of SoCs drivers/tty/serial/8250/8250_of.c | 1 + drivers/tty/serial/8250/8250_port.c | 22 ++++++++++++++++++++++ include/uapi/linux/serial_core.h | 3 ++- include/uapi/linux/serial_reg.h | 8 ++++++++ 4 files changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index d25ab1c..5281252 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -332,6 +332,7 @@ static const struct of_device_id of_platform_serial_table[] = { .data = (void *)PORT_ALTR_16550_F128, }, { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, + { .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index fe4399b..3f0c994 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -273,6 +273,15 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, + [PORT_DA830] = { + .name = "TI DA8xx/66AK2x", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO | + UART_FCR_R_TRIG_10, + .rxtrig_bytes = {1, 4, 8, 14}, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; /* Uart divisor latch read */ @@ -2118,6 +2127,19 @@ int serial8250_do_startup(struct uart_port *port) serial_port_out(port, UART_LCR, 0); } + if (port->type == PORT_DA830) { + /* Reset the port */ + serial_port_out(port, UART_IER, 0); + serial_port_out(port, UART_DA830_PWREMU_MGMT, 0); + mdelay(10); + + /* Enable Tx, Rx and free run mode */ + serial_port_out(port, UART_DA830_PWREMU_MGMT, + UART_DA830_PWREMU_MGMT_UTRST | + UART_DA830_PWREMU_MGMT_URRST | + UART_DA830_PWREMU_MGMT_FREE); + } + #ifdef CONFIG_SERIAL_8250_RSA /* * If this is an RSA port, see if we can kick it up to the diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 99dbed8..9ec741b 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -56,7 +56,8 @@ #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ #define PORT_RT2880 29 /* Ralink RT2880 internal UART */ #define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */ -#define PORT_MAX_8250 30 /* max port ID */ +#define PORT_DA830 31 /* TI DA8xx/66AK2x */ +#define PORT_MAX_8250 31 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index b4c0484..274d8fc 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -327,6 +327,14 @@ #define SERIAL_RSA_BAUD_BASE (921600) #define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) +/* Extra registers for TI DA8xx/66AK2x */ +#define UART_DA830_PWREMU_MGMT 12 + +/* PWREMU_MGMT register bits */ +#define UART_DA830_PWREMU_MGMT_FREE (1 << 0) /* Free-running mode */ +#define UART_DA830_PWREMU_MGMT_URRST (1 << 13) /* Receiver reset/enable */ +#define UART_DA830_PWREMU_MGMT_UTRST (1 << 14) /* Transmitter reset/enable */ + /* * Extra serial register definitions for the internal UARTs * in TI OMAP processors. -- 2.7.4