linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Ingo Molnar <mingo@redhat.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>,
	tglx@linutronix.de, peterz@infradead.org,
	linux-usb@vger.kernel.org, x86@kernel.org,
	linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH v7 3/5] x86: add support for earlyprintk via USB3 debug port
Date: Tue, 14 Feb 2017 10:27:19 +0800	[thread overview]
Message-ID: <1487039241-596-4-git-send-email-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <1487039241-596-1-git-send-email-baolu.lu@linux.intel.com>

Add support for early printk by writing debug messages to the
USB3 debug port.   Users can use this type of early printk by
specifying kernel parameter of "earlyprintk=xdbc". This gives
users a chance of providing debug output.

The hardware for USB3 debug port requires DMA memory blocks.
This requires to delay setting up debugging hardware and
registering boot console until the memblocks are filled.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: x86@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 Documentation/admin-guide/kernel-parameters.txt | 1 +
 arch/x86/kernel/early_printk.c                  | 5 +++++
 arch/x86/kernel/setup.c                         | 4 ++++
 3 files changed, 10 insertions(+)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index be7c0d9..4bf6138 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -988,6 +988,7 @@
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 			earlyprintk=pciserial,bus:device.function[,baudrate]
+			earlyprintk=xdbc[xhciController#]
 
 			earlyprintk is useful when the kernel crashes before
 			the normal console is initialized. It is not enabled by
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 8a12199..0f08403 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -17,6 +17,7 @@
 #include <asm/intel-mid.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
+#include <linux/usb/xhci-dbgp.h>
 #include <linux/efi.h>
 #include <asm/efi.h>
 #include <asm/pci_x86.h>
@@ -381,6 +382,10 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "efi", 3))
 			early_console_register(&early_efi_console, keep);
 #endif
+#ifdef CONFIG_EARLY_PRINTK_USB_XDBC
+		if (!strncmp(buf, "xdbc", 4))
+			early_xdbc_parse_parameter(buf + 4);
+#endif
 
 		buf++;
 	}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index aab7faa..10822b0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -70,6 +70,7 @@
 #include <linux/tboot.h>
 #include <linux/jiffies.h>
 
+#include <linux/usb/xhci-dbgp.h>
 #include <video/edid.h>
 
 #include <asm/mtrr.h>
@@ -1142,6 +1143,9 @@ void __init setup_arch(char **cmdline_p)
 	memblock_set_current_limit(ISA_END_ADDRESS);
 	memblock_x86_fill();
 
+	if (!early_xdbc_setup_hardware())
+		early_xdbc_register_console();
+
 	reserve_bios_regions();
 
 	if (efi_enabled(EFI_MEMMAP)) {
-- 
2.1.4

  parent reply	other threads:[~2017-02-14  2:27 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-14  2:27 [PATCH v7 0/5] usb: early: add support for early printk through USB3 debug port Lu Baolu
2017-02-14  2:27 ` [PATCH v7 1/5] x86: add simple udelay calibration Lu Baolu
2017-02-14  9:23   ` Sergei Shtylyov
2017-02-15  2:33     ` Lu Baolu
2017-02-14  2:27 ` [PATCH v7 2/5] usb: dbc: early driver for xhci debug capability Lu Baolu
2017-02-14  2:27 ` Lu Baolu [this message]
2017-02-14  2:27 ` [PATCH v7 4/5] usb: serial: add dbc debug device support to usb_debug Lu Baolu
2017-02-14  2:27 ` [PATCH v7 5/5] usb: doc: add document for USB3 debug port usage Lu Baolu
     [not found]   ` <CAL411-o5xaA+awYi9zEZog1zCZvMCvNQ0i0R7yh24_zrTuu4gQ@mail.gmail.com>
2017-02-14  4:41     ` Lu Baolu
2017-02-14  6:13       ` Peter Chen
2017-02-14  7:20         ` Lu Baolu
2017-03-02  2:17 ` [PATCH v7 0/5] usb: early: add support for early printk through USB3 debug port Lu Baolu
2017-03-02  6:40   ` Ingo Molnar
2017-03-03  8:22     ` Lu Baolu
2017-03-16  7:17       ` Ingo Molnar
2017-03-17  2:37         ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487039241-596-4-git-send-email-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@linux.intel.com \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).