[PATCH 4/8] x86/intel_rct/mba: Add MBA structures and initialize MBA

[Vikas Shivappa <vikas.shivappa@linux.intel.com>]

The MBA feature details like minimum bandwidth supported, b/w
granularity etc are obtained via executing CPUID with EAX=10H
,ECX=3.

Setup and initialize the MBA specific extensions to data structures like
global list of RDT resources, RDT resource structure and RDT domain
structure.

Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
---
 arch/x86/include/asm/intel_rdt.h | 17 +++++++
 arch/x86/kernel/cpu/intel_rdt.c  | 95 ++++++++++++++++++++++++++++++++++------
 2 files changed, 99 insertions(+), 13 deletions(-)

diff --git a/arch/x86/include/asm/intel_rdt.h b/arch/x86/include/asm/intel_rdt.h
index d2eee45..af65b2a 100644
--- a/arch/x86/include/asm/intel_rdt.h
+++ b/arch/x86/include/asm/intel_rdt.h
@@ -11,6 +11,9 @@
 #define IA32_L3_QOS_CFG		0xc81
 #define IA32_L3_CBM_BASE	0xc90
 #define IA32_L2_CBM_BASE	0xd10
+#define IA32_MBA_THRTL_BASE	0xd50
+#define MAX_MBA_THRTL		100u
+#define MBA_IS_LINEAR		0x4
 
 #define L3_QOS_CDP_ENABLE	0x01ULL
 
@@ -74,6 +77,14 @@ struct rftype {
  * @default_ctrl:		Specifies default cache cbm or mem b/w percent.
  * @min_cbm_bits:		Minimum number of consecutive bits to be set
  *				in a cache bit mask
+ * @max_delay:			Max throttle delay. Delay is the hardware
+ *				understandable value for memory b/w.
+ * @min_bw:			Minimum memory bandwidth in percentage
+ *				user can request
+ * @bw_gran:			Bandwidth granularity
+ * @delay_linear:		True if Mem b/w delay is in linear scale
+ * @mb_map:			Mapping of mem b/w delay to
+ *				b/w throttle percentage
  * @domains:			All domains for this resource
  * @num_domains:		Number of domains active
  * @msr_base:			Base MSR address for CBMs
@@ -92,6 +103,11 @@ struct rdt_resource {
 	int			cbm_len;
 	int			min_cbm_bits;
 	u32			default_ctrl;
+	u32			max_delay;
+	u32			min_bw;
+	u32			bw_gran;
+	u32			delay_linear;
+	u32			*mb_map;
 	struct list_head	domains;
 	int			num_domains;
 	int			msr_base;
@@ -141,6 +157,7 @@ enum {
 	RDT_RESOURCE_L3DATA,
 	RDT_RESOURCE_L3CODE,
 	RDT_RESOURCE_L2,
+	RDT_RESOURCE_MBA,
 
 	/* Must be the last */
 	RDT_NUM_RESOURCES,
diff --git a/arch/x86/kernel/cpu/intel_rdt.c b/arch/x86/kernel/cpu/intel_rdt.c
index b76a518..130ce98 100644
--- a/arch/x86/kernel/cpu/intel_rdt.c
+++ b/arch/x86/kernel/cpu/intel_rdt.c
@@ -76,6 +76,14 @@ struct rdt_resource rdt_resources_all[] = {
 		.cbm_idx_multi	= 1,
 		.cbm_idx_offset	= 0
 	},
+	{
+		.name		= "MB",
+		.domains	= domain_init(RDT_RESOURCE_MBA),
+		.msr_base	= IA32_MBA_THRTL_BASE,
+		.cache_level	= 3,
+		.cbm_idx_multi	= 1,
+		.cbm_idx_offset = 0
+	},
 };
 
 static int cbm_idx(struct rdt_resource *r, int closid)
@@ -130,6 +138,51 @@ static inline bool cache_alloc_hsw_probe(void)
 	return false;
 }
 
+/*
+ * rdt_get_mb_table() - get a mapping of b/w percentage values
+ * exposed to user interface and the h/w understandable delay values.
+ *
+ * The non-linear delay values have the granularity of power of two
+ * and also the h/w does not guarantee a curve for configured delay
+ * values vs. actual b/w throttled.
+ * Hence we need a mapping that is pre caliberated for user to express
+ * the b/w in terms of any sensible number.
+ */
+static inline int rdt_get_mb_table(struct rdt_resource *r)
+{
+	/*
+	 * There are no Intel SKUs as of now to support non-linear delay.
+	 */
+	r->mb_map = NULL;
+
+	return -ENODEV;
+}
+
+static bool rdt_get_mem_config(struct rdt_resource *r)
+{
+	union cpuid_0x10_3_eax eax;
+	union cpuid_0x10_x_edx edx;
+	u32 ebx, ecx;
+
+	cpuid_count(0x00000010, 3, &eax.full, &ebx, &ecx, &edx.full);
+	r->num_closid = edx.split.cos_max + 1;
+	r->max_delay = eax.split.max_delay + 1;
+	r->default_ctrl = MAX_MBA_THRTL;
+	if (ecx & MBA_IS_LINEAR) {
+		r->delay_linear = true;
+		r->min_bw = MAX_MBA_THRTL - r->max_delay;
+		r->bw_gran = MAX_MBA_THRTL - r->max_delay;
+	} else {
+		if (rdt_get_mb_table(r))
+			return false;
+	}
+
+	r->capable = true;
+	r->enabled = true;
+
+	return true;
+}
+
 static void rdt_get_cache_config(int idx, struct rdt_resource *r)
 {
 	union cpuid_0x10_1_eax eax;
@@ -184,9 +237,8 @@ static inline bool get_rdt_resources(void)
 		ret = true;
 	}
 
-	if (boot_cpu_has(X86_FEATURE_MBA)) {
-		ret = true;
-	}
+	if (boot_cpu_has(X86_FEATURE_MBA))
+		ret = rdt_get_mem_config(&rdt_resources_all[RDT_RESOURCE_MBA]);
 
 	return ret;
 }
@@ -262,6 +314,30 @@ static struct rdt_domain *rdt_find_domain(struct rdt_resource *r, int id,
 	return NULL;
 }
 
+static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_domain *d)
+{
+	int i;
+
+	d->ctrl_val = kmalloc_array(r->num_closid,
+				     sizeof(*d->ctrl_val), GFP_KERNEL);
+	if (!d->ctrl_val)
+		return -ENOMEM;
+
+	/*
+	 * Initialize the Control MSRs to having no control.
+	 * For Cache Allocation: Set all bits in cbm
+	 * For Memory Allocation: Set b/w requested to 100
+	 */
+	for (i = 0; i < r->num_closid; i++) {
+		int idx = cbm_idx(r, i);
+
+		d->ctrl_val[i] = r->default_ctrl;
+		wrmsrl(r->msr_base + idx, d->ctrl_val[i]);
+	}
+
+	return 0;
+}
+
 /*
  * domain_add_cpu - Add a cpu to a resource's domain list.
  *
@@ -277,7 +353,7 @@ static struct rdt_domain *rdt_find_domain(struct rdt_resource *r, int id,
  */
 static void domain_add_cpu(int cpu, struct rdt_resource *r)
 {
-	int i, id = get_cache_id(cpu, r->cache_level);
+	int id = get_cache_id(cpu, r->cache_level), ret;
 	struct list_head *add_pos = NULL;
 	struct rdt_domain *d;
 
@@ -298,19 +374,12 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 
 	d->id = id;
 
-	d->ctrl_val = kmalloc_array(r->num_closid, sizeof(*d->ctrl_val), GFP_KERNEL);
-	if (!d->ctrl_val) {
+	ret = domain_setup_ctrlval(r, d);
+	if (ret) {
 		kfree(d);
 		return;
 	}
 
-	for (i = 0; i < r->num_closid; i++) {
-		int idx = cbm_idx(r, i);
-
-		d->ctrl_val[i] = r->default_ctrl;
-		wrmsrl(r->msr_base + idx, d->ctrl_val[i]);
-	}
-
 	cpumask_set_cpu(cpu, &d->cpu_mask);
 	list_add_tail(&d->list, add_pos);
 	r->num_domains++;
-- 
1.9.1