linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jon Hunter <jonathanh@nvidia.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Ritesh Harjani <riteshh@codeaurora.org>
Cc: <linux-mmc@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Jon Hunter <jonathanh@nvidia.com>
Subject: [PATCH V2 2/2] mmc: tegra: Fix setting of Tegra SDHCI module clock
Date: Fri, 17 Mar 2017 09:25:32 +0000	[thread overview]
Message-ID: <1489742732-7722-2-git-send-email-jonathanh@nvidia.com> (raw)
In-Reply-To: <1489742732-7722-1-git-send-email-jonathanh@nvidia.com>

Commit a8e326a911d3 ("mmc: tegra: implement module external clock change")
implemented the SDHCI 'set_clock' handler for Tegra in order to change
the module clock for the Tegra SDHCI controller by using the common
clock framework API clk_set_rate(). The problem is the clk_set_rate()
may sleep and the 'set_clock' handler is always called from within the
context of a spinlock. Hence, occasionally, 'scheduling while atomic'
errors are seen. Fix this by moving the setting of the module clock to
the new 'set_parent_clock' handler which is not called from within the
context of a spinlock.

Fixes: a8e326a911d3 ("mmc: tegra: implement module external clock change")

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---

Changes since V1:
- None

 drivers/mmc/host/sdhci-tegra.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 20b6ff5b4af1..048f84e615d3 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -217,18 +217,25 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
 	sdhci_writel(host,val, SDHCI_TEGRA_AUTO_CAL_CONFIG);
 }
 
-static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+static void tegra_sdhci_set_parent_clock(struct sdhci_host *host,
+					 unsigned int clock)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
 	unsigned long host_clk;
 
 	if (!clock)
-		return sdhci_set_clock(host, clock);
+		return;
 
 	host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
-	clk_set_rate(pltfm_host->clk, host_clk);
+	WARN_ON(clk_set_rate(pltfm_host->clk, host_clk));
 	host->max_clk = clk_get_rate(pltfm_host->clk);
+}
+
+static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
 
 	sdhci_set_clock(host, clock);
 
@@ -320,6 +327,7 @@ static const struct sdhci_ops tegra_sdhci_ops = {
 	.read_w     = tegra_sdhci_readw,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_parent_clock = tegra_sdhci_set_parent_clock,
 	.set_bus_width = tegra_sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.platform_execute_tuning = tegra_sdhci_execute_tuning,
@@ -368,6 +376,7 @@ static const struct sdhci_ops tegra114_sdhci_ops = {
 	.write_w    = tegra_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_parent_clock = tegra_sdhci_set_parent_clock,
 	.set_bus_width = tegra_sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.platform_execute_tuning = tegra_sdhci_execute_tuning,
-- 
2.7.4

  reply	other threads:[~2017-03-17  9:33 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-17  9:25 [PATCH V2 1/2] mmc: sdhci: Add support for setting parent clock Jon Hunter
2017-03-17  9:25 ` Jon Hunter [this message]
2017-03-20 16:52   ` [PATCH V2 2/2] mmc: tegra: Fix setting of Tegra SDHCI module clock Thierry Reding
2017-03-20 16:52 ` [PATCH V2 1/2] mmc: sdhci: Add support for setting parent clock Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1489742732-7722-2-git-send-email-jonathanh@nvidia.com \
    --to=jonathanh@nvidia.com \
    --cc=adrian.hunter@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=riteshh@codeaurora.org \
    --cc=thierry.reding@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).