From: Kieran Bingham <kbingham@kernel.org>
To: laurent.pinchart@ideasonboard.com, niklas.soderlund@ragnatech.se,
sakari.ailus@iki.fi
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Subject: [PATCH 4/5] arm64: dts: r8a7795: salvator-x: enable VIN, CSI and ADV7482
Date: Thu, 27 Apr 2017 19:26:03 +0100 [thread overview]
Message-ID: <1493317564-18026-5-git-send-email-kbingham@kernel.org> (raw)
In-Reply-To: <1493317564-18026-1-git-send-email-kbingham@kernel.org>
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Provide bindings between the VIN, CSI and the ADV7482 on the r8a7795.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 129 +++++++++++++++++++++
1 file changed, 129 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 27b9bae60dc0..a20623faa9d2 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -196,6 +196,22 @@
};
};
};
+
+ hdmi {
+ port {
+ hdmi_in: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ cvbs {
+ port {
+ cvbs_in: endpoint {
+ remote-endpoint = <&adv7482_ain8>;
+ };
+ };
+ };
};
&du {
@@ -387,6 +403,50 @@
};
};
+&i2c4 {
+ status = "okay";
+
+ clock-frequency = <100000>;
+
+ video_receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ adv7482_ain8: endpoint@1 {
+ remote-endpoint = <&cvbs_in>;
+ };
+ };
+
+ port@9 {
+ adv7482_hdmi: endpoint@1 {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+
+ port@11 {
+ reg = <11>;
+ adv7482_txa: endpoint@1 {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+
+ port@12 {
+ reg = <12>;
+ adv7482_txb: endpoint@1 {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
+ };
+ };
+};
+
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
@@ -577,3 +637,72 @@
&pciec1 {
status = "okay";
};
+
+&vin0 {
+ status = "okay";
+};
+
+&vin1 {
+ status = "okay";
+};
+
+&vin2 {
+ status = "okay";
+};
+
+&vin3 {
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&vin6 {
+ status = "okay";
+};
+
+&vin7 {
+ status = "okay";
+};
+
+&csi20 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint@0 {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&adv7482_txb>;
+ };
+ };
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint@0 {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2017-04-27 18:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-27 18:25 [PATCH 0/5] RFC: ADV748x HDMI/Analog video receiver Kieran Bingham
2017-04-27 18:26 ` [PATCH 1/5] v4l2-subdev: Provide a port mapping for asynchronous subdevs Kieran Bingham
2017-04-27 21:43 ` Sakari Ailus
2017-04-27 22:13 ` Kieran Bingham
2017-04-27 22:49 ` Sakari Ailus
2017-04-28 0:00 ` Kieran Bingham
2017-04-27 18:26 ` [PATCH 2/5] rcar-vin: Match sources against ports if specified Kieran Bingham
2017-04-27 18:26 ` [PATCH 3/5] media: i2c: adv748x: add adv748x driver Kieran Bingham
2017-04-27 18:26 ` Kieran Bingham [this message]
2017-04-28 8:52 ` [PATCH 4/5] arm64: dts: r8a7795: salvator-x: enable VIN, CSI and ADV7482 Sergei Shtylyov
2017-04-28 10:04 ` Geert Uytterhoeven
2017-04-28 10:05 ` Kieran Bingham
2017-04-27 18:26 ` [PATCH 5/5] arm64: dts: r8a7796: " Kieran Bingham
2017-04-28 7:09 ` [PATCH 0/5] RFC: ADV748x HDMI/Analog video receiver Simon Horman
2017-04-28 8:47 ` Kieran Bingham
2017-05-01 8:32 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1493317564-18026-5-git-send-email-kbingham@kernel.org \
--to=kbingham@kernel.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox