[PATCH tip/core/rcu 75/88] rcu: Remove the RCU_KTHREAD_PRIO Kconfig option

["Paul E. McKenney" <paulmck@linux.vnet.ibm.com>]

Anything that can be done with the RCU_KTHREAD_PRIO Kconfig option can
also be done with the rcutree.kthread_prio kernel boot parameter.
This commit therefore removes this Kconfig option.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
---
 init/Kconfig                                       | 31 ----------------------
 kernel/rcu/tree.c                                  |  4 ---
 .../selftests/rcutorture/configs/rcu/TREE03        |  1 -
 .../selftests/rcutorture/configs/rcu/TREE03.boot   |  1 +
 .../selftests/rcutorture/doc/TREE_RCU-kconfig.txt  |  1 -
 5 files changed, 1 insertion(+), 37 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index a2cfde19e8b8..6f257d51f582 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -697,37 +697,6 @@ config RCU_BOOST
 	  Say Y here if you are working with real-time apps or heavy loads
 	  Say N here if you are unsure.
 
-config RCU_KTHREAD_PRIO
-	int "Real-time priority to use for RCU worker threads"
-	range 1 99 if RCU_BOOST
-	range 0 99 if !RCU_BOOST
-	default 1 if RCU_BOOST
-	default 0 if !RCU_BOOST
-	depends on RCU_EXPERT
-	help
-	  This option specifies the SCHED_FIFO priority value that will be
-	  assigned to the rcuc/n and rcub/n threads and is also the value
-	  used for RCU_BOOST (if enabled). If you are working with a
-	  real-time application that has one or more CPU-bound threads
-	  running at a real-time priority level, you should set
-	  RCU_KTHREAD_PRIO to a priority higher than the highest-priority
-	  real-time CPU-bound application thread.  The default RCU_KTHREAD_PRIO
-	  value of 1 is appropriate in the common case, which is real-time
-	  applications that do not have any CPU-bound threads.
-
-	  Some real-time applications might not have a single real-time
-	  thread that saturates a given CPU, but instead might have
-	  multiple real-time threads that, taken together, fully utilize
-	  that CPU.  In this case, you should set RCU_KTHREAD_PRIO to
-	  a priority higher than the lowest-priority thread that is
-	  conspiring to prevent the CPU from running any non-real-time
-	  tasks.  For example, if one thread at priority 10 and another
-	  thread at priority 5 are between themselves fully consuming
-	  the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
-	  set to priority 6 or higher.
-
-	  Specify the real-time priority, or take the default if unsure.
-
 config RCU_BOOST_DELAY
 	int "Milliseconds to delay boosting after RCU grace-period start"
 	range 0 3000
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index bbbddd85906b..187ac3f41526 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -168,11 +168,7 @@ static void rcu_report_exp_rdp(struct rcu_state *rsp,
 static void sync_sched_exp_online_cleanup(int cpu);
 
 /* rcuc/rcub kthread realtime priority */
-#ifdef CONFIG_RCU_KTHREAD_PRIO
-static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
-#else /* #ifdef CONFIG_RCU_KTHREAD_PRIO */
 static int kthread_prio = IS_ENABLED(CONFIG_RCU_BOOST) ? 1 : 0;
-#endif /* #else #ifdef CONFIG_RCU_KTHREAD_PRIO */
 module_param(kthread_prio, int, 0644);
 
 /* Delay in jiffies for grace-period initialization delays, debug only. */
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03 b/tools/testing/selftests/rcutorture/configs/rcu/TREE03
index 7a17c503b382..2dc31b16e506 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03
@@ -14,6 +14,5 @@ CONFIG_RCU_FANOUT_LEAF=2
 CONFIG_RCU_NOCB_CPU=n
 CONFIG_DEBUG_LOCK_ALLOC=n
 CONFIG_RCU_BOOST=y
-CONFIG_RCU_KTHREAD_PRIO=2
 CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
 CONFIG_RCU_EXPERT=y
diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot
index 9ef3aed126e9..5d2cc0bd50a0 100644
--- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot
+++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot
@@ -2,3 +2,4 @@ rcutorture.onoff_interval=1 rcutorture.onoff_holdoff=30
 rcutree.gp_preinit_delay=3
 rcutree.gp_init_delay=3
 rcutree.gp_cleanup_delay=3
+rcutree.kthread_prio=2
diff --git a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
index 1dfec4657d95..b5ea8489969a 100644
--- a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
+++ b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
@@ -16,7 +16,6 @@ CONFIG_PROVE_LOCKING -- Do several, covering CONFIG_DEBUG_LOCK_ALLOC=y and not.
 CONFIG_PROVE_RCU -- Hardwired to CONFIG_PROVE_LOCKING.
 CONFIG_PROVE_RCU_REPEATEDLY -- Do one.
 CONFIG_RCU_BOOST -- one of PREEMPT_RCU.
-CONFIG_RCU_KTHREAD_PRIO -- set to 2 for _BOOST testing.
 CONFIG_RCU_FANOUT -- Cover hierarchy, but overlap with others.
 CONFIG_RCU_FANOUT_LEAF -- Do one non-default.
 CONFIG_RCU_FAST_NO_HZ -- Do one, but not with CONFIG_RCU_NOCB_CPU_ALL.
-- 
2.5.2