From: Ran Wang <ran.wang_1@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: "Tang Yuantian" <Yuantian.Tang@nxp.com>,
"Horia Geantă" <horia.geanta@nxp.com>,
"Marc Zyngier" <marc.zyngier@arm.com>,
"Mihai Bantea" <mihai.bantea@nxp.com>,
"Scott Wood" <oss@buserror.net>, "Liu Gang" <Gang.Liu@nxp.com>,
"York Sun" <york.sun@nxp.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM64 PORT (AARCH64 ARCHITECTURE)"
<linux-arm-kernel@lists.infradead.org>,
"open list" <linux-kernel@vger.kernel.org>,
"Ran Wang" <ran.wang_1@nxp.com>
Subject: [PATCH v2] arm64: dts: ls1012a: add USB host controller nodes
Date: Fri, 14 Jul 2017 14:49:09 +0800 [thread overview]
Message-ID: <1500014949-15108-1-git-send-email-ran.wang_1@nxp.com> (raw)
LS1012A has one USB 3.0(DWC3) controller and
one USB 2.0 controller.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Change in v2:
Move node usb2@8600000 to the back of sata@3200000 to keep nodes
sorted in unit-address.
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index b1554cb..df83915 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -444,6 +444,15 @@
<&clockgen 4 3>;
};
+ usb0: usb3@2f00000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x2f00000 0x0 0x10000>;
+ interrupts = <0 60 0x4>;
+ dr_mode = "host";
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
+ };
+
sata: sata@3200000 {
compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>,
@@ -454,5 +463,13 @@
dma-coherent;
status = "disabled";
};
+
+ usb1: usb2@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <0 139 0x4>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
};
};
--
2.1.0.27.g96db324
next reply other threads:[~2017-07-14 7:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-14 6:49 Ran Wang [this message]
2017-07-25 8:03 ` [PATCH v2] arm64: dts: ls1012a: add USB host controller nodes Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500014949-15108-1-git-send-email-ran.wang_1@nxp.com \
--to=ran.wang_1@nxp.com \
--cc=Gang.Liu@nxp.com \
--cc=Yuantian.Tang@nxp.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=horia.geanta@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=mihai.bantea@nxp.com \
--cc=oss@buserror.net \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
--cc=york.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox