From: Philippe CORNU <philippe.cornu@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>,
Vincent Abriou <vincent.abriou@st.com>,
David Airlie <airlied@linux.ie>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Cc: Fabien Dessenne <fabien.dessenne@st.com>,
Mickael Reulier <mickael.reulier@st.com>,
Gabriel Fernandez <gabriel.fernandez@st.com>,
Ludovic Barre <ludovic.barre@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Subject: [PATCH v1 2/7] drm/stm: ltdc: Cleanup signal polarity defines
Date: Tue, 18 Jul 2017 12:20:14 +0200 [thread overview]
Message-ID: <1500373219-20233-3-git-send-email-philippe.cornu@st.com> (raw)
In-Reply-To: <1500373219-20233-1-git-send-email-philippe.cornu@st.com>
The GCR_PCPOL/DEPOL/VSPOL/HSPOL defines are sufficient to
describe the HS, VS, DE & PC signal polarities.
Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
drivers/gpu/drm/stm/ltdc.c | 28 ++++++++++------------------
1 file changed, 10 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index e46b427..50e8a89 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -104,10 +104,10 @@
#define GCR_LTDCEN BIT(0) /* LTDC ENable */
#define GCR_DEN BIT(16) /* Dither ENable */
-#define GCR_PCPOL BIT(28) /* Pixel Clock POLarity */
-#define GCR_DEPOL BIT(29) /* Data Enable POLarity */
-#define GCR_VSPOL BIT(30) /* Vertical Synchro POLarity */
-#define GCR_HSPOL BIT(31) /* Horizontal Synchro POLarity */
+#define GCR_PCPOL BIT(28) /* Pixel Clock POLarity-Inverted */
+#define GCR_DEPOL BIT(29) /* Data Enable POLarity-High */
+#define GCR_VSPOL BIT(30) /* Vertical Synchro POLarity-High */
+#define GCR_HSPOL BIT(31) /* Horizontal Synchro POLarity-High */
#define GC1R_WBCH GENMASK(3, 0) /* Width of Blue CHannel output */
#define GC1R_WGCH GENMASK(7, 4) /* Width of Green Channel output */
@@ -174,14 +174,6 @@
#define LXCFBLNR_CFBLN GENMASK(10, 0) /* Color Frame Buffer Line Number */
-#define HSPOL_AL 0 /* Horizontal Sync POLarity Active Low */
-#define VSPOL_AL 0 /* Vertical Sync POLarity Active Low */
-#define DEPOL_AL 0 /* Data Enable POLarity Active Low */
-#define PCPOL_IPC 0 /* Input Pixel Clock */
-#define HSPOL_AH GCR_HSPOL /* Horizontal Sync POLarity Active High */
-#define VSPOL_AH GCR_VSPOL /* Vertical Sync POLarity Active High */
-#define DEPOL_AH GCR_DEPOL /* Data Enable POLarity Active High */
-#define PCPOL_IIPC GCR_PCPOL /* Inverted Input Pixel Clock */
#define CONSTA_MAX 0xFF /* CONSTant Alpha MAX= 1.0 */
#define BF1_PAXCA 0x600 /* Pixel Alpha x Constant Alpha */
#define BF1_CA 0x400 /* Constant Alpha */
@@ -459,20 +451,20 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
clk_enable(ldev->pixel_clk);
- /* Configures the HS, VS, DE and PC polarities. */
- val = HSPOL_AL | VSPOL_AL | DEPOL_AL | PCPOL_IPC;
+ /* Configures the HS, VS, DE and PC polarities. Default Active Low */
+ val = 0;
if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
- val |= HSPOL_AH;
+ val |= GCR_HSPOL;
if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
- val |= VSPOL_AH;
+ val |= GCR_VSPOL;
if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
- val |= DEPOL_AH;
+ val |= GCR_DEPOL;
if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
- val |= PCPOL_IIPC;
+ val |= GCR_PCPOL;
reg_update_bits(ldev->regs, LTDC_GCR,
GCR_HSPOL | GCR_VSPOL | GCR_DEPOL | GCR_PCPOL, val);
--
1.9.1
next prev parent reply other threads:[~2017-07-18 10:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 10:20 [PATCH v1 0/7] drm/stm: Various cleanups Philippe CORNU
2017-07-18 10:20 ` [PATCH v1 1/7] drm/stm: drv: Rename platform driver name Philippe CORNU
2017-07-20 9:27 ` Benjamin Gaignard
2017-07-18 10:20 ` Philippe CORNU [this message]
2017-07-20 9:27 ` [PATCH v1 2/7] drm/stm: ltdc: Cleanup signal polarity defines Benjamin Gaignard
2017-07-18 10:20 ` [PATCH v1 3/7] drm/stm: ltdc: Lindent and minor cleanups Philippe CORNU
2017-07-20 9:28 ` Benjamin Gaignard
2017-07-18 10:20 ` [PATCH v1 4/7] drm/stm: ltdc: Constify funcs structures Philippe CORNU
2017-07-20 9:28 ` Benjamin Gaignard
2017-07-18 10:20 ` [PATCH v1 5/7] drm/stm: ltdc: add devm_reset_control & platform_get_ressource Philippe CORNU
2017-07-20 9:30 ` Benjamin Gaignard
2017-07-18 10:20 ` [PATCH v1 6/7] drm/stm: ltdc: Cleanup rename returned value Philippe CORNU
2017-07-20 9:31 ` Benjamin Gaignard
2017-07-18 10:20 ` [PATCH v1 7/7] drm/stm: dsi: Constify phy ops structure Philippe CORNU
2017-07-20 9:32 ` Benjamin Gaignard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500373219-20233-3-git-send-email-philippe.cornu@st.com \
--to=philippe.cornu@st.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabien.dessenne@st.com \
--cc=gabriel.fernandez@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.barre@st.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mickael.reulier@st.com \
--cc=vincent.abriou@st.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).