Re: [v5,3/3] Documentation: hwmon: Document the IBM CFF power supply

Guenter Roeck
2017-08-30T01:09:09Z

On Mon, Aug 21, 2017 at 02:46:13PM -0500, eajames@linux.vnet.ibm.com wrote:
> From: "Edward A. James" <eajames@us.ibm.com>
>
> Signed-off-by: Edward A. James <eajames@us.ibm.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> Documentation/hwmon/ibm-cffps | 54 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
> create mode 100644 Documentation/hwmon/ibm-cffps
>
> diff --git a/Documentation/hwmon/ibm-cffps b/Documentation/hwmon/ibm-cffps
> new file mode 100644
> index 0000000..e05ecd8
> --- /dev/null
> +++ b/Documentation/hwmon/ibm-cffps
> @@ -0,0 +1,54 @@
> +Kernel driver ibm-cffps
> +=======================
> +
> +Supported chips:
> + * IBM Common Form Factor power supply
> +
> +Author: Eddie James <eajames@us.ibm.com>
> +
> +Description
> +-----------
> +
> +This driver supports IBM Common Form Factor (CFF) power supplies. This driver
> +is a client to the core PMBus driver.
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices for
> +details.
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported:
> +
> +curr1_alarm Output current over-current alarm.
> +curr1_input Measured output current in mA.
> +curr1_label "iout1"
> +
> +fan1_alarm Fan 1 warning.
> +fan1_fault Fan 1 fault.
> +fan1_input Fan 1 speed in RPM.
> +fan2_alarm Fan 2 warning.
> +fan2_fault Fan 2 fault.
> +fan2_input Fan 2 speed in RPM.
> +
> +in1_alarm Input voltage under-voltage alarm.
> +in1_input Measured input voltage in mV.
> +in1_label "vin"
> +in2_alarm Output voltage over-voltage alarm.
> +in2_input Measured output voltage in mV.
> +in2_label "vout1"
> +
> +power1_alarm Input fault or alarm.
> +power1_input Measured input power in uW.
> +power1_label "pin"
> +
> +temp1_alarm PSU inlet ambient temperature over-temperature alarm.
> +temp1_input Measured PSU inlet ambient temp in millidegrees C.
> +temp2_alarm Secondary rectifier temp over-temperature alarm.
> +temp2_input Measured secondary rectifier temp in millidegrees C.
> +temp3_alarm ORing FET temperature over-temperature alarm.
> +temp3_input Measured ORing FET temperature in millidegrees C.