public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: kgunda@codeaurora.org
Cc: Eduardo Valentin <edubezval@gmail.com>,
	linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	iivanov@mm-sol.com, linux-arm-msm@vger.kernel.org,
	David Collins <collinsd@codeaurora.org>,
	linux-arm-msm-owner@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Jean Delvare <jdelvare@suse.de>,
	Lukasz Majewski <l.majewski@samsung.com>,
	Darren Hart <dvhart@linux.intel.com>,
	Heiko Stuebner <heiko@sntech.de>, Peter Feuerer <peter@piie.net>,
	bjorn.andersson@linaro.org, sboyd@codeaurora.org
Subject: Re: [PATCH V1] thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals
Date: Fri, 25 Aug 2017 10:13:09 +0800	[thread overview]
Message-ID: <1503627189.2774.3.camel@intel.com> (raw)
In-Reply-To: <5d3f612dca4181b2038e442cfba5594e@codeaurora.org>

On Thu, 2017-08-17 at 13:12 +0530, kgunda@codeaurora.org wrote:
> On 2017-08-16 17:53, kgunda@codeaurora.org wrote:
> > 
> > On 2017-08-08 13:42, Zhang Rui wrote:
> > > 
> > > On Thu, 2017-07-13 at 17:39 +0530, Kiran Gunda wrote:
> > > > 
> > > > From: David Collins <collinsd@codeaurora.org>
> > > > 
> > > > Add support for the TEMP_ALARM GEN2 PMIC peripheral
> > > > subtype.  The
> > > > GEN2 subtype defines an over temperature state with hysteresis
> > > > instead of stage in the status register.  There are two GEN2
> > > > states corresponding to stages 1 and 2.
> > > > 
> > > > Signed-off-by: David Collins <collinsd@codeaurora.org>
> > > > Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> > > Ivan,
> > > 
> > > can you please review this patch and let me know your opinion?
> > > 
> > > thanks,
> > > rui
> > Ivan,
> > Could you please review this patch ?
> > 
> > Thanks,
> > Kiran
> Looks like Ivan is no more reviewing the patches for qcom.
> Adding Bjorn and Stephen Boyd for the review.
> 
Given this is a platform specific change, I will queue it for next
merge window, and let's see if there is any problem reported.

thanks,
rui
> Thanks,
> Kiran
> > 
> > > 
> > > > 
> > > > ---
> > > >  drivers/thermal/qcom-spmi-temp-alarm.c | 92
> > > > ++++++++++++++++++++++++++--------
> > > >  1 file changed, 71 insertions(+), 21 deletions(-)
> > > > 
> > > > diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c
> > > > b/drivers/thermal/qcom-spmi-temp-alarm.c
> > > > index f502419..a5e17ba 100644
> > > > --- a/drivers/thermal/qcom-spmi-temp-alarm.c
> > > > +++ b/drivers/thermal/qcom-spmi-temp-alarm.c
> > > > @@ -1,5 +1,5 @@
> > > >  /*
> > > > - * Copyright (c) 2011-2015, The Linux Foundation. All rights
> > > > reserved.
> > > > + * Copyright (c) 2011-2015, 2017, The Linux Foundation. All
> > > > rights
> > > > reserved.
> > > >   *
> > > >   * This program is free software; you can redistribute it
> > > > and/or
> > > > modify
> > > >   * it under the terms of the GNU General Public License
> > > > version 2
> > > > and
> > > > @@ -11,6 +11,7 @@
> > > >   * GNU General Public License for more details.
> > > >   */
> > > >  
> > > > +#include <linux/bitops.h>
> > > >  #include <linux/delay.h>
> > > >  #include <linux/err.h>
> > > >  #include <linux/iio/consumer.h>
> > > > @@ -29,13 +30,17 @@
> > > >  #define QPNP_TM_REG_ALARM_CTRL		0x46
> > > >  
> > > >  #define QPNP_TM_TYPE			0x09
> > > > -#define QPNP_TM_SUBTYPE			0x08
> > > > +#define QPNP_TM_SUBTYPE_GEN1		0x08
> > > > +#define QPNP_TM_SUBTYPE_GEN2		0x09
> > > >  
> > > > -#define STATUS_STAGE_MASK		0x03
> > > > +#define STATUS_GEN1_STAGE_MASK		GENMASK(1, 0)
> > > > +#define STATUS_GEN2_STATE_MASK		GENMASK(6, 4)
> > > > +#define STATUS_GEN2_STATE_SHIFT		4
> > > >  
> > > > -#define SHUTDOWN_CTRL1_THRESHOLD_MASK	0x03
> > > > +#define SHUTDOWN_CTRL1_OVERRIDE_MASK	GENMASK(7, 6)
> > > > +#define SHUTDOWN_CTRL1_THRESHOLD_MASK	GENMASK(1, 0)
> > > >  
> > > > -#define ALARM_CTRL_FORCE_ENABLE		0x80
> > > > +#define ALARM_CTRL_FORCE_ENABLE		BIT(7)
> > > >  
> > > >  /*
> > > >   * Trip point values based on threshold control
> > > > @@ -58,6 +63,7 @@
> > > >  struct qpnp_tm_chip {
> > > >  	struct regmap			*map;
> > > >  	struct thermal_zone_device	*tz_dev;
> > > > +	unsigned int			subtype;
> > > >  	long				temp;
> > > >  	unsigned int			thresh;
> > > >  	unsigned int			stage;
> > > > @@ -66,6 +72,9 @@ struct qpnp_tm_chip {
> > > >  	struct iio_channel		*adc;
> > > >  };
> > > >  
> > > > +/* This array maps from GEN2 alarm state to GEN1 alarm stage
> > > > */
> > > > +static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2,
> > > > 3, 3,
> > > > 3};
> > > > +
> > > >  static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr,
> > > > u8
> > > > *data)
> > > >  {
> > > >  	unsigned int val;
> > > > @@ -84,30 +93,59 @@ static int qpnp_tm_write(struct
> > > > qpnp_tm_chip
> > > > *chip, u16 addr, u8 data)
> > > >  	return regmap_write(chip->map, chip->base + addr,
> > > > data);
> > > >  }
> > > >  
> > > > +/**
> > > > + * qpnp_tm_get_temp_stage() - return over-temperature stage
> > > > + * @chip:		Pointer to the qpnp_tm chip
> > > > + *
> > > > + * Return: stage (GEN1) or state (GEN2) on success, or errno
> > > > on
> > > > failure.
> > > > + */
> > > > +static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip)
> > > > +{
> > > > +	int ret;
> > > > +	u8 reg = 0;
> > > > +
> > > > +	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1)
> > > > +		ret = reg & STATUS_GEN1_STAGE_MASK;
> > > > +	else
> > > > +		ret = (reg & STATUS_GEN2_STATE_MASK) >>
> > > > STATUS_GEN2_STATE_SHIFT;
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > >  /*
> > > >   * This function updates the internal temp value based on the
> > > >   * current thermal stage and threshold as well as the previous
> > > > stage
> > > >   */
> > > >  static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip
> > > > *chip)
> > > >  {
> > > > -	unsigned int stage;
> > > > +	unsigned int stage, stage_new, stage_old;
> > > >  	int ret;
> > > > -	u8 reg = 0;
> > > >  
> > > > -	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > > > +	ret = qpnp_tm_get_temp_stage(chip);
> > > >  	if (ret < 0)
> > > >  		return ret;
> > > > +	stage = ret;
> > > >  
> > > > -	stage = reg & STATUS_STAGE_MASK;
> > > > +	if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) {
> > > > +		stage_new = stage;
> > > > +		stage_old = chip->stage;
> > > > +	} else {
> > > > +		stage_new = alarm_state_map[stage];
> > > > +		stage_old = alarm_state_map[chip->stage];
> > > > +	}
> > > >  
> > > > -	if (stage > chip->stage) {
> > > > +	if (stage_new > stage_old) {
> > > >  		/* increasing stage, use lower bound */
> > > > -		chip->temp = (stage - 1) * TEMP_STAGE_STEP +
> > > > +		chip->temp = (stage_new - 1) * TEMP_STAGE_STEP
> > > > +
> > > >  			     chip->thresh * TEMP_THRESH_STEP +
> > > >  			     TEMP_STAGE_HYSTERESIS +
> > > > TEMP_THRESH_MIN;
> > > > -	} else if (stage < chip->stage) {
> > > > +	} else if (stage_new < stage_old) {
> > > >  		/* decreasing stage, use upper bound */
> > > > -		chip->temp = stage * TEMP_STAGE_STEP +
> > > > +		chip->temp = stage_new * TEMP_STAGE_STEP +
> > > >  			     chip->thresh * TEMP_THRESH_STEP -
> > > >  			     TEMP_STAGE_HYSTERESIS +
> > > > TEMP_THRESH_MIN;
> > > >  	}
> > > > @@ -162,28 +200,37 @@ static irqreturn_t qpnp_tm_isr(int irq,
> > > > void
> > > > *data)
> > > >   */
> > > >  static int qpnp_tm_init(struct qpnp_tm_chip *chip)
> > > >  {
> > > > +	unsigned int stage;
> > > >  	int ret;
> > > > -	u8 reg;
> > > > +	u8 reg = 0;
> > > >  
> > > > -	chip->thresh = THRESH_MIN;
> > > > +	ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1,
> > > > &reg);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK;
> > > >  	chip->temp = DEFAULT_TEMP;
> > > >  
> > > > -	ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, &reg);
> > > > +	ret = qpnp_tm_get_temp_stage(chip);
> > > >  	if (ret < 0)
> > > >  		return ret;
> > > > +	chip->stage = ret;
> > > >  
> > > > -	chip->stage = reg & STATUS_STAGE_MASK;
> > > > +	stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1
> > > > +		? chip->stage : alarm_state_map[chip->stage];
> > > >  
> > > > -	if (chip->stage)
> > > > +	if (stage)
> > > >  		chip->temp = chip->thresh * TEMP_THRESH_STEP +
> > > > -			     (chip->stage - 1) *
> > > > TEMP_STAGE_STEP +
> > > > +			     (stage - 1) * TEMP_STAGE_STEP +
> > > >  			     TEMP_THRESH_MIN;
> > > >  
> > > >  	/*
> > > >  	 * Set threshold and disable software override of
> > > > stage 2
> > > > and 3
> > > >  	 * shutdowns.
> > > >  	 */
> > > > -	reg = chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
> > > > +	chip->thresh = THRESH_MIN;
> > > > +	reg &= ~(SHUTDOWN_CTRL1_OVERRIDE_MASK |
> > > > SHUTDOWN_CTRL1_THRESHOLD_MASK);
> > > > +	reg |= chip->thresh & SHUTDOWN_CTRL1_THRESHOLD_MASK;
> > > >  	ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1,
> > > > reg);
> > > >  	if (ret < 0)
> > > >  		return ret;
> > > > @@ -242,13 +289,16 @@ static int qpnp_tm_probe(struct
> > > > platform_device
> > > > *pdev)
> > > >  		goto fail;
> > > >  	}
> > > >  
> > > > -	if (type != QPNP_TM_TYPE || subtype !=
> > > > QPNP_TM_SUBTYPE) {
> > > > +	if (type != QPNP_TM_TYPE || (subtype !=
> > > > QPNP_TM_SUBTYPE_GEN1
> > > > +				     && subtype !=
> > > > QPNP_TM_SUBTYPE_GEN2)) {
> > > >  		dev_err(&pdev->dev, "invalid type 0x%02x or
> > > > subtype
> > > > 0x%02x\n",
> > > >  			type, subtype);
> > > >  		ret = -ENODEV;
> > > >  		goto fail;
> > > >  	}
> > > >  
> > > > +	chip->subtype = subtype;
> > > > +
> > > >  	ret = qpnp_tm_init(chip);
> > > >  	if (ret < 0) {
> > > >  		dev_err(&pdev->dev, "init failed\n");
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe 
> > > linux-arm-msm" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.htm
> > > l
> > --
> > To unsubscribe from this list: send the line "unsubscribe 
> > linux-arm-msm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2017-08-25  2:12 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-13 12:09 [PATCH V1] thermal: qcom-spmi-temp-alarm: add support for GEN2 PMIC peripherals Kiran Gunda
2017-08-08  8:12 ` Zhang Rui
2017-08-16 12:23   ` kgunda
2017-08-17  7:42     ` kgunda
2017-08-25  2:13       ` Zhang Rui [this message]
2017-08-25 23:19         ` Stephen Boyd
2017-08-28  5:11           ` kgunda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503627189.2774.3.camel@intel.com \
    --to=rui.zhang@intel.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=collinsd@codeaurora.org \
    --cc=dvhart@linux.intel.com \
    --cc=edubezval@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=heiko@sntech.de \
    --cc=iivanov@mm-sol.com \
    --cc=jdelvare@suse.de \
    --cc=kgunda@codeaurora.org \
    --cc=l.majewski@samsung.com \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peter@piie.net \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox