From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755034AbdJSRIh (ORCPT ); Thu, 19 Oct 2017 13:08:37 -0400 Received: from mail-wm0-f65.google.com ([74.125.82.65]:54526 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755012AbdJSRIe (ORCPT ); Thu, 19 Oct 2017 13:08:34 -0400 X-Google-Smtp-Source: ABhQp+QRcTQ+99md1v4YlbzHK/FE+akPfqqbmjlYZIPjULUqOtpKolT9dgij20jRFlBOUqkkdajL8w== From: Daniel Lezcano To: edubezval@gmail.com, rui.zhang@intel.com Cc: linux-pm@vger.kernel.org, leo.yan@linaro.org, linux-kernel@vger.kernel.org Subject: [PATCH 03/18] thermal/drivers/hisi: Fix kernel panic on alarm interrupt Date: Thu, 19 Oct 2017 19:05:45 +0200 Message-Id: <1508432760-17847-3-git-send-email-daniel.lezcano@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1508432760-17847-1-git-send-email-daniel.lezcano@linaro.org> References: <6ac48f08-7fe6-92e9-0801-6ed3bcd05ff1@linaro.org> <1508432760-17847-1-git-send-email-daniel.lezcano@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The threaded interrupt for the alarm interrupt is requested before the temperature controller is setup. This one can fire an interrupt immediately leading to a kernel panic as the sensor data is not initialized. In order to prevent that, move the threaded irq after the Tsensor is setup. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan --- drivers/thermal/hisi_thermal.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index 687efd4..feae552 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -287,15 +287,6 @@ static int hisi_thermal_probe(struct platform_device *pdev) if (data->irq < 0) return data->irq; - ret = devm_request_threaded_irq(&pdev->dev, data->irq, - hisi_thermal_alarm_irq, - hisi_thermal_alarm_irq_thread, - 0, "hisi_thermal", data); - if (ret < 0) { - dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); - return ret; - } - platform_set_drvdata(pdev, data); data->clk = devm_clk_get(&pdev->dev, "thermal_clk"); @@ -328,6 +319,15 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_toggle_sensor(&data->sensors, true); + ret = devm_request_threaded_irq(&pdev->dev, data->irq, + hisi_thermal_alarm_irq, + hisi_thermal_alarm_irq_thread, + 0, "hisi_thermal", data); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret); + return ret; + } + enable_irq(data->irq); return 0; -- 2.7.4