[PATCH] usb: dwc2: add optional usb ecc reset bit

[Dinh Nguyen <dinguyen@kernel.org>]

The dwc2 USB controller in Stratix10 has an additional ECC reset bit that
needs to get de-asserted in order for the controller to work properly.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 drivers/usb/dwc2/core.h     |  1 +
 drivers/usb/dwc2/platform.c | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 8367d4f9..a4b5f4e 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -920,6 +920,7 @@ struct dwc2_hsotg {
 	int     irq;
 	struct clk *clk;
 	struct reset_control *reset;
+	struct reset_control *reset_ecc;
 
 	unsigned int queuing_high_bandwidth:1;
 	unsigned int srp_success:1;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index daf0d37..d466e03 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -220,6 +220,15 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 
 	reset_control_deassert(hsotg->reset);
 
+	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
+	if (IS_ERR(hsotg->reset_ecc)) {
+		ret = PTR_ERR(hsotg->reset_ecc);
+		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
+		return ret;
+	}
+
+	reset_control_deassert(hsotg->reset_ecc);
+
 	/* Set default UTMI width */
 	hsotg->phyif = GUSBCFG_PHYIF16;
 
@@ -318,6 +327,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 		dwc2_lowlevel_hw_disable(hsotg);
 
 	reset_control_assert(hsotg->reset);
+	reset_control_assert(hsotg->reset_ecc);
 
 	return 0;
 }
-- 
2.7.4