[PATCH 3/4] phy: usb: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled

[Al Cooper <alcooperx@gmail.com>]

From: Al Cooper <al.cooper@broadcom.com>

Set PHY3_IDDQ_OVERRIDE in the xhci uninit routine. This will save
additional power when the XHCI driver is not enabled.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
 drivers/phy/broadcom/phy-brcm-usb-init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 69ea479..6672adcc 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -73,6 +73,7 @@
 #define   USB_CTRL_USB30_CTL1_USB3_IPP_MASK		0x20000000 /* option */
 #define USB_CTRL_USB30_PCTL		0x70
 #define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK	0x00000002
+#define   USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK	0x00008000
 #define   USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK	0x00020000
 #define USB_CTRL_USB_DEVICE_CTL1	0x90
 #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003 /* option */
@@ -998,6 +999,7 @@ void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
 void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
 {
 	brcmusb_xhci_soft_reset(params, 1);
+	USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
 }
 
 void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
-- 
1.9.0.138.g2de3478