linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Himanshu Jha <himanshujha199640@gmail.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com, aacraid@adaptec.com
Cc: anil.gurumurthy@qlogic.com, sudarsana.kalluru@qlogic.com,
	QLogic-Storage-Upstream@qlogic.com, satishkh@cisco.com,
	sebaddel@cisco.com, kartilak@cisco.com,
	QLogic-Storage-Upstream@cavium.com, qla2xxx-upstream@qlogic.com,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Himanshu Jha <himanshujha199640@gmail.com>
Subject: [PATCH 1/9] scsi: qla4xxx: Use zeroing allocator rather than allocator/memset
Date: Sat, 30 Dec 2017 20:58:24 +0530	[thread overview]
Message-ID: <1514647712-6332-2-git-send-email-himanshujha199640@gmail.com> (raw)
In-Reply-To: <1514647712-6332-1-git-send-email-himanshujha199640@gmail.com>

Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset
0.

Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci

Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
---
 drivers/scsi/qla4xxx/ql4_init.c |  5 ++---
 drivers/scsi/qla4xxx/ql4_mbx.c  | 21 +++++++++------------
 drivers/scsi/qla4xxx/ql4_nx.c   |  5 ++---
 drivers/scsi/qla4xxx/ql4_os.c   | 12 +++++-------
 4 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 5d6d158..52b1a0b 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -153,15 +153,14 @@ int qla4xxx_get_sys_info(struct scsi_qla_host *ha)
 	dma_addr_t sys_info_dma;
 	int status = QLA_ERROR;
 
-	sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
-				      &sys_info_dma, GFP_KERNEL);
+	sys_info = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
+				       &sys_info_dma, GFP_KERNEL);
 	if (sys_info == NULL) {
 		DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
 			      ha->host_no, __func__));
 
 		goto exit_get_sys_info_no_free;
 	}
-	memset(sys_info, 0, sizeof(*sys_info));
 
 	/* Get flash sys info */
 	if (qla4xxx_get_flash(ha, sys_info_dma, FLASH_OFFSET_SYS_INFO,
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 1da04f3..bda2e64 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -625,15 +625,14 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 	int status = QLA_ERROR;
 
-	init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
-					sizeof(struct addr_ctrl_blk),
-					&init_fw_cb_dma, GFP_KERNEL);
+	init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev,
+					 sizeof(struct addr_ctrl_blk),
+					 &init_fw_cb_dma, GFP_KERNEL);
 	if (init_fw_cb == NULL) {
 		DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
 			      ha->host_no, __func__));
 		goto exit_init_fw_cb_no_free;
 	}
-	memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 
 	/* Get Initialize Firmware Control Block. */
 	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
@@ -710,9 +709,9 @@ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 	uint32_t mbox_cmd[MBOX_REG_COUNT];
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 
-	init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
-					sizeof(struct addr_ctrl_blk),
-					&init_fw_cb_dma, GFP_KERNEL);
+	init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev,
+					 sizeof(struct addr_ctrl_blk),
+					 &init_fw_cb_dma, GFP_KERNEL);
 	if (init_fw_cb == NULL) {
 		printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
 		       __func__);
@@ -720,7 +719,6 @@ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha)
 	}
 
 	/* Get Initialize Firmware Control Block. */
-	memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 	if (qla4xxx_get_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma) !=
 	    QLA_SUCCESS) {
 		DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
@@ -1342,16 +1340,15 @@ int qla4xxx_about_firmware(struct scsi_qla_host *ha)
 	uint32_t mbox_sts[MBOX_REG_COUNT];
 	int status = QLA_ERROR;
 
-	about_fw = dma_alloc_coherent(&ha->pdev->dev,
-				      sizeof(struct about_fw_info),
-				      &about_fw_dma, GFP_KERNEL);
+	about_fw = dma_zalloc_coherent(&ha->pdev->dev,
+				       sizeof(struct about_fw_info),
+				       &about_fw_dma, GFP_KERNEL);
 	if (!about_fw) {
 		DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory "
 				  "for about_fw\n", __func__));
 		return status;
 	}
 
-	memset(about_fw, 0, sizeof(struct about_fw_info));
 	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 	memset(&mbox_sts, 0, sizeof(mbox_sts));
 
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index e91abb3..968bd85 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -4050,15 +4050,14 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha)
 	dma_addr_t sys_info_dma;
 	int status = QLA_ERROR;
 
-	sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
-				      &sys_info_dma, GFP_KERNEL);
+	sys_info = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*sys_info),
+				       &sys_info_dma, GFP_KERNEL);
 	if (sys_info == NULL) {
 		DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
 		    ha->host_no, __func__));
 		return status;
 	}
 
-	memset(sys_info, 0, sizeof(*sys_info));
 	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 	memset(&mbox_sts, 0, sizeof(mbox_sts));
 
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 2b8a8ce..82e889b 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -2689,16 +2689,15 @@ qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, uint32_t len)
 	uint32_t rem = len;
 	struct nlattr *attr;
 
-	init_fw_cb = dma_alloc_coherent(&ha->pdev->dev,
-					sizeof(struct addr_ctrl_blk),
-					&init_fw_cb_dma, GFP_KERNEL);
+	init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev,
+					 sizeof(struct addr_ctrl_blk),
+					 &init_fw_cb_dma, GFP_KERNEL);
 	if (!init_fw_cb) {
 		ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n",
 			   __func__);
 		return -ENOMEM;
 	}
 
-	memset(init_fw_cb, 0, sizeof(struct addr_ctrl_blk));
 	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
 	memset(&mbox_sts, 0, sizeof(mbox_sts));
 
@@ -4196,15 +4195,14 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha)
 			  sizeof(struct shadow_regs) +
 			  MEM_ALIGN_VALUE +
 			  (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-	ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len,
-					&ha->queues_dma, GFP_KERNEL);
+	ha->queues = dma_zalloc_coherent(&ha->pdev->dev, ha->queues_len,
+					 &ha->queues_dma, GFP_KERNEL);
 	if (ha->queues == NULL) {
 		ql4_printk(KERN_WARNING, ha,
 		    "Memory Allocation failed - queues.\n");
 
 		goto mem_alloc_error_exit;
 	}
-	memset(ha->queues, 0, ha->queues_len);
 
 	/*
 	 * As per RISC alignment requirements -- the bus-address must be a
-- 

  reply	other threads:[~2017-12-30 15:29 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-30 15:28 [PATCH 0/9] scsi: Use zeroing allocators than allocator/memset Himanshu Jha
2017-12-30 15:28 ` Himanshu Jha [this message]
2018-01-02  4:39   ` [PATCH 1/9] scsi: qla4xxx: Use zeroing allocator rather " Rangankar, Manish
2018-01-04  6:08   ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 2/9] scsi: qla2xxx: " Himanshu Jha
2018-01-02 17:01   ` Madhani, Himanshu
2018-01-04  6:09   ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 3/9] scsi: qedi: Use zeroing allocator instead of allocator/memset Himanshu Jha
2018-01-02  4:40   ` Rangankar, Manish
2018-01-04  6:17   ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 4/9] scsi: mvsas: Use zeroing allocator rather than allocator/memset Himanshu Jha
2017-12-30 15:28 ` [PATCH 5/9] scsi: fnic: " Himanshu Jha
2017-12-30 15:28 ` [PATCH 6/9] scsi: dpt_i2o: " Himanshu Jha
2017-12-30 15:28 ` [PATCH 7/9] scsi: bnx2fc: " Himanshu Jha
2018-01-02 21:14   ` Chad Dupuis
2018-01-04  6:17   ` Martin K. Petersen
2018-01-04  7:38     ` Himanshu Jha
2018-01-09  3:35       ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 8/9] scsi: bfa: " Himanshu Jha
2018-01-02  5:40   ` Gurumurthy, Anil
2018-01-04  6:13   ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 9/9] scsi: bnx2i: " Himanshu Jha
2018-01-02  4:42   ` Rangankar, Manish
2018-01-04  6:13   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1514647712-6332-2-git-send-email-himanshujha199640@gmail.com \
    --to=himanshujha199640@gmail.com \
    --cc=QLogic-Storage-Upstream@cavium.com \
    --cc=QLogic-Storage-Upstream@qlogic.com \
    --cc=aacraid@adaptec.com \
    --cc=anil.gurumurthy@qlogic.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kartilak@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=qla2xxx-upstream@qlogic.com \
    --cc=satishkh@cisco.com \
    --cc=sebaddel@cisco.com \
    --cc=sudarsana.kalluru@qlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).