From: Himanshu Jha <himanshujha199640@gmail.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com, aacraid@adaptec.com
Cc: anil.gurumurthy@qlogic.com, sudarsana.kalluru@qlogic.com,
QLogic-Storage-Upstream@qlogic.com, satishkh@cisco.com,
sebaddel@cisco.com, kartilak@cisco.com,
QLogic-Storage-Upstream@cavium.com, qla2xxx-upstream@qlogic.com,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
Himanshu Jha <himanshujha199640@gmail.com>
Subject: [PATCH 4/9] scsi: mvsas: Use zeroing allocator rather than allocator/memset
Date: Sat, 30 Dec 2017 20:58:27 +0530 [thread overview]
Message-ID: <1514647712-6332-5-git-send-email-himanshujha199640@gmail.com> (raw)
In-Reply-To: <1514647712-6332-1-git-send-email-himanshujha199640@gmail.com>
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by
memset 0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
---
drivers/scsi/mvsas/mv_init.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 8c91637..6748394 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -253,33 +253,28 @@ static int mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
/*
* alloc and init our DMA areas
*/
- mvi->tx = dma_alloc_coherent(mvi->dev,
- sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
- &mvi->tx_dma, GFP_KERNEL);
+ mvi->tx = dma_zalloc_coherent(mvi->dev,
+ sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+ &mvi->tx_dma, GFP_KERNEL);
if (!mvi->tx)
goto err_out;
- memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
- mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
- &mvi->rx_fis_dma, GFP_KERNEL);
+ mvi->rx_fis = dma_zalloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+ &mvi->rx_fis_dma, GFP_KERNEL);
if (!mvi->rx_fis)
goto err_out;
- memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
-
- mvi->rx = dma_alloc_coherent(mvi->dev,
- sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
- &mvi->rx_dma, GFP_KERNEL);
+ mvi->rx = dma_zalloc_coherent(mvi->dev,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+ &mvi->rx_dma, GFP_KERNEL);
if (!mvi->rx)
goto err_out;
- memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
mvi->rx[0] = cpu_to_le32(0xfff);
mvi->rx_cons = 0xfff;
- mvi->slot = dma_alloc_coherent(mvi->dev,
- sizeof(*mvi->slot) * slot_nr,
- &mvi->slot_dma, GFP_KERNEL);
+ mvi->slot = dma_zalloc_coherent(mvi->dev,
+ sizeof(*mvi->slot) * slot_nr,
+ &mvi->slot_dma, GFP_KERNEL);
if (!mvi->slot)
goto err_out;
- memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
TRASH_BUCKET_SIZE,
--
2.7.4
next prev parent reply other threads:[~2017-12-30 15:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-30 15:28 [PATCH 0/9] scsi: Use zeroing allocators than allocator/memset Himanshu Jha
2017-12-30 15:28 ` [PATCH 1/9] scsi: qla4xxx: Use zeroing allocator rather " Himanshu Jha
2018-01-02 4:39 ` Rangankar, Manish
2018-01-04 6:08 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 2/9] scsi: qla2xxx: " Himanshu Jha
2018-01-02 17:01 ` Madhani, Himanshu
2018-01-04 6:09 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 3/9] scsi: qedi: Use zeroing allocator instead of allocator/memset Himanshu Jha
2018-01-02 4:40 ` Rangankar, Manish
2018-01-04 6:17 ` Martin K. Petersen
2017-12-30 15:28 ` Himanshu Jha [this message]
2017-12-30 15:28 ` [PATCH 5/9] scsi: fnic: Use zeroing allocator rather than allocator/memset Himanshu Jha
2017-12-30 15:28 ` [PATCH 6/9] scsi: dpt_i2o: " Himanshu Jha
2017-12-30 15:28 ` [PATCH 7/9] scsi: bnx2fc: " Himanshu Jha
2018-01-02 21:14 ` Chad Dupuis
2018-01-04 6:17 ` Martin K. Petersen
2018-01-04 7:38 ` Himanshu Jha
2018-01-09 3:35 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 8/9] scsi: bfa: " Himanshu Jha
2018-01-02 5:40 ` Gurumurthy, Anil
2018-01-04 6:13 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 9/9] scsi: bnx2i: " Himanshu Jha
2018-01-02 4:42 ` Rangankar, Manish
2018-01-04 6:13 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514647712-6332-5-git-send-email-himanshujha199640@gmail.com \
--to=himanshujha199640@gmail.com \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=QLogic-Storage-Upstream@qlogic.com \
--cc=aacraid@adaptec.com \
--cc=anil.gurumurthy@qlogic.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=kartilak@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=qla2xxx-upstream@qlogic.com \
--cc=satishkh@cisco.com \
--cc=sebaddel@cisco.com \
--cc=sudarsana.kalluru@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).