From: Himanshu Jha <himanshujha199640@gmail.com>
To: jejb@linux.vnet.ibm.com, martin.petersen@oracle.com, aacraid@adaptec.com
Cc: anil.gurumurthy@qlogic.com, sudarsana.kalluru@qlogic.com,
QLogic-Storage-Upstream@qlogic.com, satishkh@cisco.com,
sebaddel@cisco.com, kartilak@cisco.com,
QLogic-Storage-Upstream@cavium.com, qla2xxx-upstream@qlogic.com,
linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
Himanshu Jha <himanshujha199640@gmail.com>
Subject: [PATCH 5/9] scsi: fnic: Use zeroing allocator rather than allocator/memset
Date: Sat, 30 Dec 2017 20:58:28 +0530 [thread overview]
Message-ID: <1514647712-6332-6-git-send-email-himanshujha199640@gmail.com> (raw)
In-Reply-To: <1514647712-6332-1-git-send-email-himanshujha199640@gmail.com>
Use vzalloc instead of vmalloc followed by memset 0.
Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
Suggested-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
---
drivers/scsi/fnic/fnic_debugfs.c | 10 ++--------
drivers/scsi/fnic/fnic_trace.c | 9 ++-------
2 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
index 9858484..ec249bd 100644
--- a/drivers/scsi/fnic/fnic_debugfs.c
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -233,24 +233,18 @@ static int fnic_trace_debugfs_open(struct inode *inode,
return -ENOMEM;
if (*rdata_ptr == fc_trc_flag->fnic_trace) {
- fnic_dbg_prt->buffer = vmalloc(3 *
- (trace_max_pages * PAGE_SIZE));
+ fnic_dbg_prt->buffer = vzalloc(3 *
+ (trace_max_pages * PAGE_SIZE));
if (!fnic_dbg_prt->buffer) {
kfree(fnic_dbg_prt);
return -ENOMEM;
}
- memset((void *)fnic_dbg_prt->buffer, 0,
- 3 * (trace_max_pages * PAGE_SIZE));
fnic_dbg_prt->buffer_len = fnic_get_trace_data(fnic_dbg_prt);
} else {
- fnic_dbg_prt->buffer =
- vmalloc(3 * (fnic_fc_trace_max_pages * PAGE_SIZE));
+ fnic_dbg_prt->buffer =
+ vzalloc(3 * (fnic_fc_trace_max_pages * PAGE_SIZE));
if (!fnic_dbg_prt->buffer) {
kfree(fnic_dbg_prt);
return -ENOMEM;
}
- memset((void *)fnic_dbg_prt->buffer, 0,
- 3 * (fnic_fc_trace_max_pages * PAGE_SIZE));
fnic_dbg_prt->buffer_len =
fnic_fc_trace_get_data(fnic_dbg_prt, *rdata_ptr);
}
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index 4826f59..e63285e 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -468,14 +468,13 @@ int fnic_trace_buf_init(void)
fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/
FNIC_ENTRY_SIZE_BYTES;
- fnic_trace_buf_p = (unsigned long)vmalloc((trace_max_pages * PAGE_SIZE));
+ fnic_trace_buf_p = (unsigned long)vzalloc((trace_max_pages
+ * PAGE_SIZE));
if (!fnic_trace_buf_p) {
printk(KERN_ERR PFX "Failed to allocate memory "
"for fnic_trace_buf_p\n");
err = -ENOMEM;
goto err_fnic_trace_buf_init;
}
- memset((void *)fnic_trace_buf_p, 0, (trace_max_pages * PAGE_SIZE));
fnic_trace_entries.page_offset = vmalloc(fnic_max_trace_entries *
sizeof(unsigned long));
@@ -555,8 +554,7 @@ int fnic_fc_trace_init(void)
fc_trace_max_entries = (fnic_fc_trace_max_pages * PAGE_SIZE)/
FC_TRC_SIZE_BYTES;
- fnic_fc_ctlr_trace_buf_p = (unsigned long)vmalloc(
- fnic_fc_trace_max_pages * PAGE_SIZE);
+ fnic_fc_ctlr_trace_buf_p = (unsigned long)vzalloc(
+ fnic_fc_trace_max_pages * PAGE_SIZE);
if (!fnic_fc_ctlr_trace_buf_p) {
pr_err("fnic: Failed to allocate memory for "
"FC Control Trace Buf\n");
@@ -564,9 +562,6 @@ int fnic_fc_trace_init(void)
goto err_fnic_fc_ctlr_trace_buf_init;
}
- memset((void *)fnic_fc_ctlr_trace_buf_p, 0,
- fnic_fc_trace_max_pages * PAGE_SIZE);
-
/* Allocate memory for page offset */
fc_trace_entries.page_offset = vmalloc(fc_trace_max_entries *
sizeof(unsigned long));
--
2.7.4
next prev parent reply other threads:[~2017-12-30 15:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-30 15:28 [PATCH 0/9] scsi: Use zeroing allocators than allocator/memset Himanshu Jha
2017-12-30 15:28 ` [PATCH 1/9] scsi: qla4xxx: Use zeroing allocator rather " Himanshu Jha
2018-01-02 4:39 ` Rangankar, Manish
2018-01-04 6:08 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 2/9] scsi: qla2xxx: " Himanshu Jha
2018-01-02 17:01 ` Madhani, Himanshu
2018-01-04 6:09 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 3/9] scsi: qedi: Use zeroing allocator instead of allocator/memset Himanshu Jha
2018-01-02 4:40 ` Rangankar, Manish
2018-01-04 6:17 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 4/9] scsi: mvsas: Use zeroing allocator rather than allocator/memset Himanshu Jha
2017-12-30 15:28 ` Himanshu Jha [this message]
2017-12-30 15:28 ` [PATCH 6/9] scsi: dpt_i2o: " Himanshu Jha
2017-12-30 15:28 ` [PATCH 7/9] scsi: bnx2fc: " Himanshu Jha
2018-01-02 21:14 ` Chad Dupuis
2018-01-04 6:17 ` Martin K. Petersen
2018-01-04 7:38 ` Himanshu Jha
2018-01-09 3:35 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 8/9] scsi: bfa: " Himanshu Jha
2018-01-02 5:40 ` Gurumurthy, Anil
2018-01-04 6:13 ` Martin K. Petersen
2017-12-30 15:28 ` [PATCH 9/9] scsi: bnx2i: " Himanshu Jha
2018-01-02 4:42 ` Rangankar, Manish
2018-01-04 6:13 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1514647712-6332-6-git-send-email-himanshujha199640@gmail.com \
--to=himanshujha199640@gmail.com \
--cc=QLogic-Storage-Upstream@cavium.com \
--cc=QLogic-Storage-Upstream@qlogic.com \
--cc=aacraid@adaptec.com \
--cc=anil.gurumurthy@qlogic.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=kartilak@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=qla2xxx-upstream@qlogic.com \
--cc=satishkh@cisco.com \
--cc=sebaddel@cisco.com \
--cc=sudarsana.kalluru@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).