Re: [PATCH v1] extcon: int3496: Ignore incorrect IoRestriction for ID pin

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Wed, 2018-02-28 at 16:01 +0100, Hans de Goede wrote:
> Hi,
> 
> On 26-02-18 20:34, Andy Shevchenko wrote:
> > The commit 70216fd937fe introduced a workaround for incorrect
> > IoRestriction mode in ACPI table.
> > 
> > Now, when GPIO ACPI library does it in generic way, just set
> > an appropriate quirk flag instead.
> > 
> > Cc: Hans de Goede <hdegoede@redhat.com>
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> Looks good to me and everything still works after this change,
> so with the earlier review remarks fixed this is:
> 
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
> Tested-by: Hans de Goede <hdegoede@redhat.com>

Thanks!
I will send a v2 soon.

> 
> Regards,
> 
> Hans
> 
> 
> 
> 
> 
> > ---
> >   drivers/extcon/extcon-intel-int3496.c | 9 +++++----
> >   1 file changed, 5 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/extcon/extcon-intel-int3496.c
> > b/drivers/extcon/extcon-intel-int3496.c
> > index 191e99f06a9a..acaccb128fc4 100644
> > --- a/drivers/extcon/extcon-intel-int3496.c
> > +++ b/drivers/extcon/extcon-intel-int3496.c
> > @@ -50,7 +50,11 @@ static const struct acpi_gpio_params vbus_gpios =
> > { INT3496_GPIO_VBUS_EN, 0, fal
> >   static const struct acpi_gpio_params mux_gpios = {
> > INT3496_GPIO_USB_MUX, 0, false };
> >   
> >   static const struct acpi_gpio_mapping acpi_int3496_default_gpios[]
> > = {
> > -	{ "id-gpios", &id_gpios, 1 },
> > +	/*
> > +	 * Some platforms have a bug in ACPI GPIO description
> > making IRQ
> > +	 * GPIO to be output only. Ask the GPIO core to ignore this
> > limit.
> > +	 */
> > +	{ "id-gpios", &id_gpios, 1,
> > ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
> >   	{ "vbus-gpios", &vbus_gpios, 1 },
> >   	{ "mux-gpios", &mux_gpios, 1 },
> >   	{ },
> > @@ -112,9 +116,6 @@ static int int3496_probe(struct platform_device
> > *pdev)
> >   		ret = PTR_ERR(data->gpio_usb_id);
> >   		dev_err(dev, "can't request USB ID GPIO: %d\n",
> > ret);
> >   		return ret;
> > -	} else if (gpiod_get_direction(data->gpio_usb_id) !=
> > GPIOF_DIR_IN) {
> > -		dev_warn(dev, FW_BUG "USB ID GPIO not in input
> > mode, fixing\n");
> > -		gpiod_direction_input(data->gpio_usb_id);
> >   	}
> >   
> >   	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
> > 

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy