From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Philippe Ombredanne <pombredanne@nexb.com>,
Thomas Gleixner <tglx@linutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongdong Liu <liudongdong3@huawei.com>,
Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
Sinan Kaya <okaya@codeaurora.org>,
Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v12 1/6] PCI/AER: Rename error recovery to generic PCI naming
Date: Wed, 28 Feb 2018 22:34:12 +0530 [thread overview]
Message-ID: <1519837457-3596-2-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1519837457-3596-1-git-send-email-poza@codeaurora.org>
This patch renames error recovery to generic name with pcie prefix
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fcd8191..abc514e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -342,6 +342,9 @@ static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
void pci_enable_acs(struct pci_dev *dev);
+/* PCI error reporting and recovery */
+void pcie_do_recovery(struct pci_dev *dev, int severity);
+
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index a4bfea5..aeb83a0 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -478,7 +478,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
}
/**
- * do_recovery - handle nonfatal/fatal error recovery process
+ * pcie_do_recovery - handle nonfatal/fatal error recovery process
* @dev: pointer to a pci_dev data structure of agent detecting an error
* @severity: error severity type
*
@@ -486,7 +486,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
* error detected message to all downstream drivers within a hierarchy in
* question and return the returned code.
*/
-static void do_recovery(struct pci_dev *dev, int severity)
+static void pcie_do_recovery(struct pci_dev *dev, int severity)
{
pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
enum pci_channel_state state;
@@ -566,7 +566,7 @@ static void handle_error_source(struct pcie_device *aerdev,
pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
info->status);
} else
- do_recovery(dev, info->severity);
+ pcie_do_recovery(dev, info->severity);
}
#ifdef CONFIG_ACPI_APEI_PCIEAER
@@ -631,7 +631,7 @@ static void aer_recover_work_func(struct work_struct *work)
}
cper_print_aer(pdev, entry.severity, entry.regs);
if (entry.severity != AER_CORRECTABLE)
- do_recovery(pdev, entry.severity);
+ pcie_do_recovery(pdev, entry.severity);
pci_dev_put(pdev);
}
}
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2018-02-28 17:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-28 17:04 [PATCH v12 0/6] Address error and recovery for AER and DPC Oza Pawandeep
2018-02-28 17:04 ` Oza Pawandeep [this message]
2018-02-28 17:04 ` [PATCH v12 2/6] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 3/6] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-03-06 14:02 ` Sinan Kaya
2018-03-08 7:56 ` poza
2018-02-28 17:04 ` [PATCH v12 4/6] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 5/6] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-02-28 17:04 ` [PATCH v12 6/6] PCI/DPC: Enumerate the devices after DPC trigger event Oza Pawandeep
2018-03-11 22:03 ` [PATCH v12 0/6] Address error and recovery for AER and DPC Bjorn Helgaas
2018-03-12 3:03 ` Sinan Kaya
2018-03-12 14:25 ` Keith Busch
2018-03-12 14:46 ` poza
2018-03-12 14:58 ` Keith Busch
2018-03-12 15:34 ` poza
2018-03-12 17:33 ` Keith Busch
2018-03-12 17:41 ` Sinan Kaya
2018-03-12 17:56 ` Keith Busch
2018-03-12 19:47 ` Bjorn Helgaas
2018-03-12 23:26 ` Keith Busch
2018-03-13 3:47 ` Sinan Kaya
2018-03-14 20:50 ` Keith Busch
2018-03-14 21:00 ` Sinan Kaya
2018-05-08 19:25 ` Bjorn Helgaas
2018-03-12 14:01 ` poza
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519837457-3596-2-git-send-email-poza@codeaurora.org \
--to=poza@codeaurora.org \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=keith.busch@intel.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=okaya@codeaurora.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
--cc=timur@codeaurora.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).