public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Javier Arteaga <javier@emutex.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pinctrl: intel: Implement intel_gpio_get_direction callback
Date: Tue, 06 Mar 2018 16:56:05 +0200	[thread overview]
Message-ID: <1520348165.10722.438.camel@linux.intel.com> (raw)
In-Reply-To: <3585081b-70af-5c31-08c0-84e96b6055bc@emutex.com>

On Tue, 2018-03-06 at 14:31 +0000, Javier Arteaga wrote:
> (Fix Andy's Cc: - apologies)
> 
> On 06/03/2018 13:42, Javier Arteaga wrote:
> > Allows querying GPIO direction from the pad config register.
> > If the pad is not in GPIO mode, return an error.
> > 
> > Signed-off-by: Javier Arteaga <javier@emutex.com>
> > ---
> > This is needed by the drivers for the UP Squared board, an APL-based
> > platform. (For now, these drivers are out-of-tree.)
> > 
> > An earlier version of this patch was reviewed some time ago by Andy
> > Shevchenko outside of the mailing lists:
> > <https://github.com/emutex/ubilinux-kernel/commit/708a776f2ffd1b1c>
> > 

Yes, this one look good!

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> >  drivers/pinctrl/intel/pinctrl-intel.c | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/drivers/pinctrl/intel/pinctrl-intel.c
> > b/drivers/pinctrl/intel/pinctrl-intel.c
> > index 96e73e30204e..1e24a6b8a64e 100644
> > --- a/drivers/pinctrl/intel/pinctrl-intel.c
> > +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> > @@ -788,6 +788,24 @@ static void intel_gpio_set(struct gpio_chip
> > *chip, unsigned offset, int value)
> >  	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> >  }
> >  
> > +static int intel_gpio_get_direction(struct gpio_chip *chip,
> > unsigned int offset)
> > +{
> > +	struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
> > +	void __iomem *reg;
> > +	u32 padcfg0;
> > +
> > +	reg = intel_get_padcfg(pctrl, offset, PADCFG0);
> > +	if (!reg)
> > +		return -EINVAL;
> > +
> > +	padcfg0 = readl(reg);
> > +

> > +	if (padcfg0 & PADCFG0_PMODE_MASK)
> > +		return -EINVAL;

Actually we might return direction of GPIO function while pin is in some
other mode, though it would probably make not much sense in practice.

> > +
> > +	return !!(padcfg0 & PADCFG0_GPIOTXDIS);
> > +}
> > +
> >  static int intel_gpio_direction_input(struct gpio_chip *chip,
> > unsigned offset)
> >  {
> >  	return pinctrl_gpio_direction_input(chip->base + offset);
> > @@ -804,6 +822,7 @@ static const struct gpio_chip intel_gpio_chip =
> > {
> >  	.owner = THIS_MODULE,
> >  	.request = gpiochip_generic_request,
> >  	.free = gpiochip_generic_free,
> > +	.get_direction = intel_gpio_get_direction,
> >  	.direction_input = intel_gpio_direction_input,
> >  	.direction_output = intel_gpio_direction_output,
> >  	.get = intel_gpio_get,
> > 

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

  reply	other threads:[~2018-03-06 14:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-06 13:42 [PATCH] pinctrl: intel: Implement intel_gpio_get_direction callback Javier Arteaga
2018-03-06 14:31 ` Javier Arteaga
2018-03-06 14:56   ` Andy Shevchenko [this message]
2018-03-06 14:59     ` Andy Shevchenko
2018-03-06 15:29       ` Javier Arteaga
2018-03-06 18:06     ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1520348165.10722.438.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=javier@emutex.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox