From: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
To: "rodrigosiqueiramelo@gmail.com" <rodrigosiqueiramelo@gmail.com>,
"jic23@kernel.org" <jic23@kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"knaack.h@gmx.de" <knaack.h@gmx.de>,
"lars@metafoo.de" <lars@metafoo.de>,
"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>,
"daniel.baluta@nxp.com" <daniel.baluta@nxp.com>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
"kernel-janitors@vger.kernel.org"
<kernel-janitors@vger.kernel.org>
Subject: Re: [PATCH] iio:magnetometer: Remove duplications in iio_chan_spec
Date: Mon, 12 Mar 2018 16:21:17 +0000 [thread overview]
Message-ID: <1520871676.15766.205.camel@intel.com> (raw)
In-Reply-To: <20180307202044.1d6e66f2@archlinux>
[-- Attachment #1: Type: text/plain, Size: 5107 bytes --]
On Wed, 2018-03-07 at 20:20 +0000, Jonathan Cameron wrote:
> On Tue, 6 Mar 2018 09:00:11 -0300
> Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> wrote:
>
> > The magn_3d_channels array has multiple declarations of
> > iio_chan_spec.
> > Most of the iio_chan_spec are very similar, changing only by the
> > .type
> > and .channel2 field. This patch reduces the code duplication by
> > adding a
> > macro that can replace the iio_chan_spec repetitions in the
> > magn_3d_channels array.
I don't think it was tested otherwise channel registration would have
failed. See below.
> >
> > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
>
> Whilst this looks fine to me, I'd like Srinivas to take a look before
> I apply it as this is his driver. Please do make sure to cc the
> author.
> Whilst many such email addresses bounce as they have moved on they
> don't always.
>
> Jonathan
>
> > ---
> > drivers/iio/magnetometer/hid-sensor-magn-3d.c | 83 ++++++---------
> > ------------
> > 1 file changed, 19 insertions(+), 64 deletions(-)
> >
> > diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > index a1fd9d591818..fff64711a6c8 100644
> > --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
> > @@ -74,72 +74,27 @@ static const u32
> > magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
> > HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
> > };
> >
> > +#define HID_SENSOR_MAGN_3D_AXIS_CHANNEL(channel_type,
> > characteristic) \
> > + {
> > \
> > + .type = channel_type,
> > \
> > + .modified = 1,
> > \
> > + .channel2 = characteristic,
> > \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > \
> > + .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) | \
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > \
> > + BIT(IIO_CHAN_INFO_SAMP_FRE
> > Q) | \
> > + BIT(IIO_CHAN_INFO_HYSTERES
> > IS), \
> > + }
> > \
> > +
> > /* Channel definitions */
> > static const struct iio_chan_spec magn_3d_channels[] = {
> > - {
> > - .type = IIO_MAGN,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_X,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_MAGN,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_Y,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_MAGN,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_Z,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_ROT,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_ROT,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_ROT,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_NORTH_MAGN,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }, {
> > - .type = IIO_ROT,
> > - .modified = 1,
> > - .channel2 = IIO_MOD_NORTH_TRUE,
> > - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > - .info_mask_shared_by_type =
> > BIT(IIO_CHAN_INFO_OFFSET) |
> > - BIT(IIO_CHAN_INFO_SCALE) |
> > - BIT(IIO_CHAN_INFO_SAMP_FREQ) |
> > - BIT(IIO_CHAN_INFO_HYSTERESIS),
> > - }
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_X),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_Y),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_MAGN, IIO_MOD_Z),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > IIO_MOD_NORTH_MAGN_TILT_COMP),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > IIO_MOD_NORTH_TRUE_TILT_COMP),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > IIO_MOD_NORTH_MAGN),
> > + HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT,
> > IIO_MOD_NORTH_MAGN),
It should be
HID_SENSOR_MAGN_3D_AXIS_CHANNEL(IIO_ROT, IIO_MOD_NORTH_TRUE)
Thanks,
Srinivas
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3290 bytes --]
next prev parent reply other threads:[~2018-03-12 16:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-06 12:00 [PATCH] iio:magnetometer: Remove duplications in iio_chan_spec Rodrigo Siqueira
2018-03-07 20:20 ` Jonathan Cameron
2018-03-12 16:21 ` Pandruvada, Srinivas [this message]
2018-03-12 16:34 ` Rodrigo Siqueira
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1520871676.15766.205.camel@intel.com \
--to=srinivas.pandruvada@intel.com \
--cc=daniel.baluta@nxp.com \
--cc=jic23@kernel.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=rodrigosiqueiramelo@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox