linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans Holmberg <hans.ml.holmberg@owltronix.com>
To: Matias Bjorling <mb@lightnvm.io>
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	Javier Gonzales <javier@cnexlabs.com>,
	Hans Holmberg <hans.holmberg@cnexlabs.com>
Subject: [PATCH 2/7] lightnvm: pblk: fix mapping issue on failed writes
Date: Wed, 29 Aug 2018 14:23:29 +0200	[thread overview]
Message-ID: <1535545414-550-3-git-send-email-hans.ml.holmberg@owltronix.com> (raw)
In-Reply-To: <1535545414-550-1-git-send-email-hans.ml.holmberg@owltronix.com>

From: Hans Holmberg <hans.holmberg@cnexlabs.com>

On 1.2-devices, the mapping-out of remaning sectors in the
failed-write's block can result in an infinite loop,
stalling the write pipeline, fix this.

Fixes: 6a3abf5beef6 ("lightnvm: pblk: rework write error recovery path")

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
---
 drivers/lightnvm/pblk-write.c | 45 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/drivers/lightnvm/pblk-write.c b/drivers/lightnvm/pblk-write.c
index 1bc879ab679d..fd67325f6e54 100644
--- a/drivers/lightnvm/pblk-write.c
+++ b/drivers/lightnvm/pblk-write.c
@@ -103,6 +103,41 @@ static void pblk_complete_write(struct pblk *pblk, struct nvm_rq *rqd,
 	pblk_rb_sync_end(&pblk->rwb, &flags);
 }
 
+static int pblk_next_ppa_in_blk(struct nvm_geo *geo, struct ppa_addr *ppa)
+{
+	int done = 0;
+
+	if (geo->version == NVM_OCSSD_SPEC_12) {
+		int sec = ppa->g.sec;
+
+		sec++;
+		if (sec == geo->ws_min) {
+			int pg = ppa->g.pg;
+
+			sec = 0;
+			pg++;
+			if (pg == geo->num_pg) {
+				int pl = ppa->g.pl;
+
+				pg = 0;
+				pl++;
+				if (pl == geo->num_pln)
+					done = 1;
+
+				ppa->g.pl = pl;
+			}
+			ppa->g.pg = pg;
+		}
+		ppa->g.sec = sec;
+	} else {
+		ppa->m.sec++;
+		if (ppa->m.sec == geo->clba)
+			done = 1;
+	}
+
+	return done;
+}
+
 /* Map remaining sectors in chunk, starting from ppa */
 static void pblk_map_remaining(struct pblk *pblk, struct ppa_addr *ppa)
 {
@@ -125,15 +160,7 @@ static void pblk_map_remaining(struct pblk *pblk, struct ppa_addr *ppa)
 		if (!test_and_set_bit(paddr, line->invalid_bitmap))
 			le32_add_cpu(line->vsc, -1);
 
-		if (geo->version == NVM_OCSSD_SPEC_12) {
-			map_ppa.ppa++;
-			if (map_ppa.g.pg == geo->num_pg)
-				done = 1;
-		} else {
-			map_ppa.m.sec++;
-			if (map_ppa.m.sec == geo->clba)
-				done = 1;
-		}
+		done = pblk_next_ppa_in_blk(geo, &map_ppa);
 	}
 
 	line->w_err_gc->has_write_err = 1;
-- 
2.7.4


  parent reply	other threads:[~2018-08-29 12:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 12:23 [PATCH 0/7] pblk fixes Hans Holmberg
2018-08-29 12:23 ` [PATCH 1/7] lightnvm: introduce nvm_rq_to_ppa_list Hans Holmberg
2018-08-29 12:23 ` Hans Holmberg [this message]
2018-08-29 13:23   ` [PATCH 2/7] lightnvm: pblk: fix mapping issue on failed writes Matias Bjørling
2018-08-29 14:51     ` Hans Holmberg
2018-08-29 12:23 ` [PATCH 3/7] lightnvm: pblk: allocate line map bitmaps using a mempool Hans Holmberg
2018-08-29 12:23 ` [PATCH 4/7] lightnvm: pblk: move global caches to module init/exit Hans Holmberg
2018-08-29 13:29   ` Matias Bjørling
2018-08-29 15:06     ` Hans Holmberg
2018-08-31 10:02       ` Hans Holmberg
2018-08-29 12:23 ` [PATCH 5/7] lightnvm: pblk: remove unused parameters in pblk_up_rq Hans Holmberg
2018-08-29 12:23 ` [PATCH 6/7] lightnvm: pblk: fix up prints in pblk_read_check_rand Hans Holmberg
2018-08-29 12:23 ` [PATCH 7/7] lightnvm: pblk: fix write amplificiation calculation Hans Holmberg
2018-08-29 13:31 ` [PATCH 0/7] pblk fixes Matias Bjørling

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1535545414-550-3-git-send-email-hans.ml.holmberg@owltronix.com \
    --to=hans.ml.holmberg@owltronix.com \
    --cc=hans.holmberg@cnexlabs.com \
    --cc=javier@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mb@lightnvm.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).