public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org,
	robh+dt@kernel.org, evgreen@chromium.org, dianders@google.com
Cc: asutoshd@codeaurora.org, riteshh@codeaurora.org,
	stummala@codeaurora.org, sayalil@codeaurora.org,
	Veerabhadrarao Badiganti <vbadigan@codeaurora.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH V3 2/2] mmc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically
Date: Thu,  1 Nov 2018 17:36:39 +0530	[thread overview]
Message-ID: <1541073999-11752-3-git-send-email-vbadigan@codeaurora.org> (raw)
In-Reply-To: <1541073999-11752-1-git-send-email-vbadigan@codeaurora.org>

On few SDHCI-MSM controllers, the host controller's clock tuning
circuit may go out of sync if controller clocks are gated which
eventually will result in data CRC, command CRC/timeout errors.
To overcome this h/w limitation, the DLL needs to be re-initialized
and restored with its old settings once clocks are ungated.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
---
 drivers/mmc/host/sdhci-msm.c | 59 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3cc8bfe..e38a4e8 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -232,6 +232,7 @@ struct sdhci_msm_variant_ops {
  */
 struct sdhci_msm_variant_info {
 	bool mci_removed;
+	bool restore_dll_config;
 	const struct sdhci_msm_variant_ops *var_ops;
 	const struct sdhci_msm_offset *offset;
 };
@@ -256,6 +257,7 @@ struct sdhci_msm_host {
 	bool pwr_irq_flag;
 	u32 caps_0;
 	bool mci_removed;
+	bool restore_dll_config;
 	const struct sdhci_msm_variant_ops *var_ops;
 	const struct sdhci_msm_offset *offset;
 };
@@ -1025,6 +1027,36 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
 	return ret;
 }
 
+static int sdhci_msm_restore_sdr_dll_config(struct sdhci_host *host)
+{
+	struct mmc_ios ios = host->mmc->ios;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int ret;
+
+	/*
+	 * SDR DLL comes into picure only if clock frequency is greater than
+	 * 100MHz. And its needed only for SDR104, HS200 and HS400 cards.
+	 * Its not needed for HS400es cards.
+	 */
+	if (host->clock <= CORE_FREQ_100MHZ ||
+	    !(ios.timing == MMC_TIMING_MMC_HS400 ||
+	    ios.timing == MMC_TIMING_MMC_HS200 ||
+	    ios.timing == MMC_TIMING_UHS_SDR104) ||
+	    ios.enhanced_strobe)
+		return 0;
+
+	/* Reset the tuning block */
+	ret = msm_init_cm_dll(host);
+	if (ret)
+		return ret;
+
+	/* Restore the tuning block */
+	ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
+
+	return ret;
+}
+
 static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -1069,7 +1101,6 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		if (rc)
 			return rc;
 
-		msm_host->saved_tuning_phase = phase;
 		rc = mmc_send_tuning(mmc, opcode, NULL);
 		if (!rc) {
 			/* Tuning is successful at this tuning point */
@@ -1094,6 +1125,7 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		rc = msm_config_cm_dll_phase(host, phase);
 		if (rc)
 			return rc;
+		msm_host->saved_tuning_phase = phase;
 		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
 			 mmc_hostname(mmc), phase);
 	} else {
@@ -1617,12 +1649,21 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host)
 
 static const struct sdhci_msm_variant_info sdhci_msm_mci_var = {
 	.mci_removed = false,
+	.restore_dll_config = false,
 	.var_ops = &mci_var_ops,
 	.offset = &sdhci_msm_mci_offset,
 };
 
 static const struct sdhci_msm_variant_info sdhci_msm_v5_var = {
 	.mci_removed = true,
+	.restore_dll_config = false,
+	.var_ops = &v5_var_ops,
+	.offset = &sdhci_msm_v5_offset,
+};
+
+static const struct sdhci_msm_variant_info sdm845_sdhci_var = {
+	.mci_removed = true,
+	.restore_dll_config = true,
 	.var_ops = &v5_var_ops,
 	.offset = &sdhci_msm_v5_offset,
 };
@@ -1630,6 +1671,7 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host)
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
 	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
+	{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
 	{},
 };
 
@@ -1689,6 +1731,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 	var_info = of_device_get_match_data(&pdev->dev);
 
 	msm_host->mci_removed = var_info->mci_removed;
+	msm_host->restore_dll_config = var_info->restore_dll_config;
 	msm_host->var_ops = var_info->var_ops;
 	msm_host->offset = var_info->offset;
 
@@ -1928,9 +1971,21 @@ static int sdhci_msm_runtime_resume(struct device *dev)
 	struct sdhci_host *host = dev_get_drvdata(dev);
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int ret;
 
-	return clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
 				       msm_host->bulk_clks);
+	if (ret)
+		goto out;
+	/*
+	 * Whenever core-clock is gated dynamically, it's needed to
+	 * restore the SDR DLL settings when the clock is ungated.
+	 */
+	if (msm_host->restore_dll_config && msm_host->clk_rate)
+		ret = sdhci_msm_restore_sdr_dll_config(host);
+
+out:
+	return ret;
 }
 #endif
 
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


  parent reply	other threads:[~2018-11-01 12:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1541073999-11752-1-git-send-email-vbadigan@codeaurora.org>
2018-11-01 12:06 ` [PATCH V3 1/2] dt-bindings: mmc: sdhci-msm: Add new compatible string for SDM845 SOC Veerabhadrarao Badiganti
2018-11-01 20:29   ` Doug Anderson
2018-11-05 20:36     ` Rob Herring
2018-11-05 21:11       ` Doug Anderson
2018-11-06 17:59         ` Veerabhadrarao Badiganti
2018-11-01 12:06 ` Veerabhadrarao Badiganti [this message]
2018-11-01 17:10   ` [PATCH V3 2/2] mmc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically Evan Green
2018-11-01 20:16   ` Doug Anderson
2018-11-01 20:33   ` Doug Anderson
2018-11-06 17:51     ` Veerabhadrarao Badiganti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1541073999-11752-3-git-send-email-vbadigan@codeaurora.org \
    --to=vbadigan@codeaurora.org \
    --cc=adrian.hunter@intel.com \
    --cc=asutoshd@codeaurora.org \
    --cc=dianders@google.com \
    --cc=evgreen@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=riteshh@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=sayalil@codeaurora.org \
    --cc=stummala@codeaurora.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox