From: Corentin Labbe <clabbe@baylibre.com>
To: jdelvare@suse.com, linux@roeck-us.net
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH 1/2] hwmon: fix typo build -> built
Date: Thu, 29 Nov 2018 20:09:14 +0000 [thread overview]
Message-ID: <1543522155-17406-1-git-send-email-clabbe@baylibre.com> (raw)
This patch fix a typo where build is used instead of built.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
drivers/hwmon/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 532a0532d01b..100b7fce1412 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -179,7 +179,7 @@ config SENSORS_ADT7X10
This module contains common code shared by the ADT7310/ADT7320 and
ADT7410/ADT7420 temperature monitoring chip drivers.
- If build as a module, the module will be called adt7x10.
+ If built as a module, the module will be called adt7x10.
config SENSORS_ADT7310
tristate "Analog Devices ADT7310/ADT7320"
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adt7475.
config SENSORS_ASC7621
@@ -666,7 +666,7 @@ config SENSORS_JZ4740
If you say yes here you get support for reading adc values from the ADCIN
pin on Ingenic JZ4740 SoC based boards.
- This driver can also be build as a module. If so, the module will be
+ This driver can also be built as a module. If so, the module will be
called jz4740-hwmon.
config SENSORS_JC42
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called amc6821.
config SENSORS_INA209
--
2.18.1
next reply other threads:[~2018-11-29 20:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-29 20:09 Corentin Labbe [this message]
2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
2018-12-01 18:34 ` Guenter Roeck
2018-12-01 20:27 ` Joe Perches
2018-12-01 20:34 ` Randy Dunlap
2018-12-01 18:32 ` [PATCH 1/2] hwmon: fix typo build -> built Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1543522155-17406-1-git-send-email-clabbe@baylibre.com \
--to=clabbe@baylibre.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox