Re: [PATCH] ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock for SDMA

[Lucas Stach <l.stach@pengutronix.de>]

Am Sonntag, den 24.03.2019, 22:01 -0700 schrieb Andrey Smirnov:
> Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
> clock to determine if it needs to configure the IP block as operating
> at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
> clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
> ratio is 1:1 which results in broken SDMA functionality(this at least
> breaks RAVE SP serdev driver on RDU2). Fix the code to specify
> IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to the problem.

As this is breaking DT backward compatibility, I think we need a
blacklist in the driver for SOCs where the DT is known to be broken.

But fixing the broken DT is still a good idea, so:

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> Fixes: 25aaa75df1e6 ("dmaengine: imx-sdma: add clock ratio 1:1 check")
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Angus Ainslie (Purism) <angus@akkea.ca>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> > Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
> 
> This probably has been fixed already, so please ignore this patch if
> that is the case.
> 
> Thanks,
> Andrey Smirnov
> 
>  arch/arm/boot/dts/imx6qdl.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 9f9aa6e7ed0e..354feba077b2 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -949,7 +949,7 @@
> >  				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
> >  				reg = <0x020ec000 0x4000>;
> >  				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
> > -				clocks = <&clks IMX6QDL_CLK_SDMA>,
> > +				clocks = <&clks IMX6QDL_CLK_IPG>,
> >  					 <&clks IMX6QDL_CLK_SDMA>;
> >  				clock-names = "ipg", "ahb";
> >  				#dma-cells = <3>;