public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bitan Biswas <bbiswas@nvidia.com>
To: Laxman Dewangan <ldewangan@nvidia.com>,
	Thierry Reding <treding@nvidia.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	<linux-i2c@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Peter Rosin <peda@axentia.se>,
	Wolfram Sang <wsa@the-dreams.de>,
	Dmitry Osipenko <digetx@gmail.com>
Cc: Shardar Mohammed <smohammed@nvidia.com>,
	Sowjanya Komatineni <skomatineni@nvidia.com>,
	Mantravadi Karthik <mkarthik@nvidia.com>,
	Bitan Biswas <bbiswas@nvidia.com>
Subject: [PATCH V4 6/6] i2c: tegra: remove BUG, BUG_ON
Date: Mon, 10 Jun 2019 10:08:35 -0700	[thread overview]
Message-ID: <1560186515-30797-6-git-send-email-bbiswas@nvidia.com> (raw)
In-Reply-To: <1560186515-30797-1-git-send-email-bbiswas@nvidia.com>

Remove redundant BUG_ON calls or replace with WARN_ON_ONCE
as needed. Remove BUG() and make Rx and Tx case handling
similar.

Signed-off-by: Bitan Biswas <bbiswas@nvidia.com>
---
 drivers/i2c/busses/i2c-tegra.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4dfb4c1..30619d6 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -515,7 +515,6 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
 	 * prevent overwriting past the end of buf
 	 */
 	if (rx_fifo_avail > 0 && buf_remaining > 0) {
-		BUG_ON(buf_remaining > 3);
 		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
 		val = cpu_to_le32(val);
 		memcpy(buf, &val, buf_remaining);
@@ -523,7 +522,6 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
 		rx_fifo_avail--;
 	}
 
-	BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
 	i2c_dev->msg_buf_remaining = buf_remaining;
 	i2c_dev->msg_buf = buf;
 
@@ -581,7 +579,6 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
 	 * boundary and fault.
 	 */
 	if (tx_fifo_avail > 0 && buf_remaining > 0) {
-		BUG_ON(buf_remaining > 3);
 		memcpy(&val, buf, buf_remaining);
 		val = le32_to_cpu(val);
 
@@ -850,7 +847,8 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 			if (i2c_dev->msg_buf_remaining)
 				tegra_i2c_empty_rx_fifo(i2c_dev);
 			else
-				BUG();
+				tegra_i2c_mask_irq(i2c_dev,
+						   I2C_INT_RX_FIFO_DATA_REQ);
 		}
 
 		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
@@ -876,7 +874,10 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
 		if (i2c_dev->is_curr_dma_xfer)
 			i2c_dev->msg_buf_remaining = 0;
-		BUG_ON(i2c_dev->msg_buf_remaining);
+		if (WARN_ON_ONCE(i2c_dev->msg_buf_remaining)) {
+			i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+			goto err;
+		}
 		complete(&i2c_dev->msg_complete);
 	}
 	goto done;
-- 
2.7.4


  parent reply	other threads:[~2019-06-10 17:09 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-10 17:08 [PATCH V4 1/6] i2c: tegra: clean up macros Bitan Biswas
2019-06-10 17:08 ` [PATCH V4 2/6] i2c: tegra: remove unnecessary variable init Bitan Biswas
2019-06-10 17:08 ` [PATCH V4 3/6] i2c: tegra: fix alignment and spacing violations Bitan Biswas
2019-06-10 17:08 ` [PATCH V4 4/6] i2c: tegra: add spinlock definition comment Bitan Biswas
2019-06-10 17:08 ` [PATCH V4 5/6] i2c: tegra: fix msleep warning Bitan Biswas
2019-06-10 17:08 ` Bitan Biswas [this message]
2019-06-10 18:12   ` [PATCH V4 6/6] i2c: tegra: remove BUG, BUG_ON Dmitry Osipenko
2019-06-10 18:18     ` Dmitry Osipenko
2019-06-10 19:41     ` Bitan Biswas
2019-06-10 21:00       ` Dmitry Osipenko
2019-06-11  7:38         ` Bitan Biswas
2019-06-11 11:34           ` Dmitry Osipenko
2019-06-11 18:22             ` Bitan Biswas
2019-06-12 13:33               ` Dmitry Osipenko
2019-06-13 11:33                 ` Bitan Biswas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560186515-30797-6-git-send-email-bbiswas@nvidia.com \
    --to=bbiswas@nvidia.com \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=ldewangan@nvidia.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mkarthik@nvidia.com \
    --cc=peda@axentia.se \
    --cc=skomatineni@nvidia.com \
    --cc=smohammed@nvidia.com \
    --cc=treding@nvidia.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox