From: Stefan Riedmueller <s.riedmueller@phytec.de>
To: shawnguo@kernel.org, s.hauer@pengutronix.de, robh+dt@kernel.org,
mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, martyn.welch@collabora.com,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com
Subject: [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin
Date: Tue, 9 Jul 2019 09:19:17 +0200 [thread overview]
Message-ID: <1562656767-273566-1-git-send-email-s.riedmueller@phytec.de> (raw)
This patchstack adjusts the already existing naming for the PHYTEC
phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
phyCORE-i.MX 6 and the phyBOARD-Mira.
Furthermore it introduces some small fixes and adds support for the PHYTEC
phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
full featured option with either NAND flash or eMMC and a low cost option
only with NAND flash.
Stefan Riedmueller (10):
ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
ARM: dts: imx6ul: segin: Add boot media to dts filename
ARM: dts: imx6ul: segin: Reduce eth drive strength
ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
ARM: dts: imx6ul: segin: Only enable NAND if it is populated
ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
ARM: dts: imx6ul: segin: Move machine include to dts files
ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
6ULL
arch/arm/boot/dts/Makefile | 5 +-
...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 51 ++++++++----
...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 +++++-----
...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 ++--
...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 ++++++--
arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi | 24 ++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts | 93 ++++++++++++++++++++++
.../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts | 45 +++++++++++
.../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
arch/arm/boot/dts/imx6ull-phytec-segin.dtsi | 38 +++++++++
11 files changed, 409 insertions(+), 48 deletions(-)
rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (72%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
--
2.7.4
next reply other threads:[~2019-07-09 7:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-09 7:19 Stefan Riedmueller [this message]
2019-07-09 7:19 ` [PATCH 01/10] ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 02/10] ARM: dts: imx6ul: segin: Add boot media to dts filename Stefan Riedmueller
2019-07-23 3:10 ` Shawn Guo
2019-07-09 7:19 ` [PATCH 03/10] ARM: dts: imx6ul: segin: Reduce eth drive strength Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 06/10] ARM: dts: imx6ul: segin: Only enable NAND if it is populated Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 07/10] ARM: dts: imx6ul: phycore: Add eMMC at usdhc2 Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 08/10] ARM: dts: imx6ul: segin: Move ECSPI interface to board include file Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 09/10] ARM: dts: imx6ul: segin: Move machine include to dts files Stefan Riedmueller
2019-07-09 7:19 ` [PATCH 10/10] ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX 6ULL Stefan Riedmueller
2019-07-23 5:39 ` [PATCH 00/10] Add further support for PHYTEC phyBOARD-Segin Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562656767-273566-1-git-send-email-s.riedmueller@phytec.de \
--to=s.riedmueller@phytec.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martyn.welch@collabora.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox