Re: [PATCH 3/3] arm: dts: ls1021a: Add snps,configure-gfladj property to USB3 node

Alexander Stein
2015-07-23T10:11:48Z

On Thursday 23 July 2015 15:42:58, Nikhil Badola wrote:
> Add "snps,configure-gfladj" boolean property to USB3 node. This property
^^^^^^
This does not match...

> is used to determine if frame length adjustment is required
>
> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
> ---
> arch/arm/boot/dts/ls1021a.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..f03f842 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -404,6 +404,7 @@
> reg = <0x0 0x3100000 0x0 0x10000>;
> interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> + snps,configure-fladj = <0x20>;
^^^^^
...that. The same is for the subject. I guess these "gfladj" are just leftovers as patch 1 & 2 talk about "fladj"

Best regards,
Alexander
--
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein@systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax: +49 (0) 3765 38600-4100

Managing Directors:
Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010