linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Nicolas Boichat <drinkcat@chromium.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh@kernel.org>
Cc: James Liao <jamesjj.liao@mediatek.com>,
	Fan Chen <fan.chen@mediatek.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, Weiyi Lu <weiyi.lu@mediatek.com>,
	Yong Wu <yong.wu@mediatek.com>
Subject: [PATCH v7 10/13] soc: mediatek: Add subsys clock control for bus protection
Date: Wed, 28 Aug 2019 17:11:43 +0800	[thread overview]
Message-ID: <1566983506-26598-11-git-send-email-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <1566983506-26598-1-git-send-email-weiyi.lu@mediatek.com>

Add subsys CG control flow before/after the bus protect control
due to bus protection need SMI bus relative CGs enabled to feedback
its ack.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
 drivers/soc/mediatek/mtk-scpsys.c | 72 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 70 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index f25101f..33c4034 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -108,6 +108,7 @@ enum clk_id {
 };
 
 #define MAX_CLKS	3
+#define MAX_SUBSYS_CLKS 10
 
 /**
  * struct scp_domain_data - scp domain data for power on/off flow
@@ -120,6 +121,8 @@ enum clk_id {
  * @clk_id: The basic clocks required by this power domain.
  * @basic_clk_id: provide the same purpose with field "clk_id"
  *                by declaring basic clock prefix name rather than clk_id.
+ * @subsys_clk_prefix: The prefix name of the clocks need to be enabled
+ *                     before releasing bus protection.
  * @caps: The flag for active wake-up action.
  * @bp_table: The mask table for multiple step bus protection.
  */
@@ -132,6 +135,7 @@ struct scp_domain_data {
 	u32 bus_prot_mask;
 	enum clk_id clk_id[MAX_CLKS];
 	const char *basic_clk_id[MAX_CLKS];
+	const char *subsys_clk_prefix;
 	u8 caps;
 	struct bus_prot bp_table[MAX_STEPS];
 };
@@ -142,6 +146,7 @@ struct scp_domain {
 	struct generic_pm_domain genpd;
 	struct scp *scp;
 	struct clk *clk[MAX_CLKS];
+	struct clk *subsys_clk[MAX_SUBSYS_CLKS];
 	const struct scp_domain_data *data;
 	struct regulator *supply;
 };
@@ -347,16 +352,22 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	ret = scpsys_sram_enable(scpd, ctl_addr);
+	ret = scpsys_clk_enable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 	if (ret < 0)
 		goto err_pwr_ack;
 
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_sram;
+
 	ret = scpsys_bus_protect_disable(scpd);
 	if (ret < 0)
-		goto err_pwr_ack;
+		goto err_sram;
 
 	return 0;
 
+err_sram:
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
 err_pwr_ack:
 	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
@@ -383,6 +394,8 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
+	scpsys_clk_disable(scpd->subsys_clk, MAX_SUBSYS_CLKS);
+
 	/* subsys power off */
 	val = readl(ctl_addr) | PWR_ISO_BIT;
 	writel(val, ctl_addr);
@@ -419,6 +432,48 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	return ret;
 }
 
+static int init_subsys_clks(struct platform_device *pdev,
+		const char *prefix, struct clk **clk)
+{
+	struct device_node *node = pdev->dev.of_node;
+	u32 prefix_len, sub_clk_cnt = 0;
+	struct property *prop;
+	const char *clk_name;
+
+	if (!node) {
+		dev_err(&pdev->dev, "Cannot find scpsys node: %ld\n",
+			PTR_ERR(node));
+		return PTR_ERR(node);
+	}
+
+	prefix_len = strlen(prefix);
+
+	of_property_for_each_string(node, "clock-names", prop, clk_name) {
+		if (!strncmp(clk_name, prefix, prefix_len) &&
+				(clk_name[prefix_len] == '-')) {
+			if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
+				dev_err(&pdev->dev,
+					"subsys clk out of range %d\n",
+					sub_clk_cnt);
+				return -ENOMEM;
+			}
+
+			clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
+						clk_name);
+
+			if (IS_ERR(clk)) {
+				dev_err(&pdev->dev,
+					"Subsys clk read fail %ld\n",
+					PTR_ERR(clk));
+				return PTR_ERR(clk);
+			}
+			sub_clk_cnt++;
+		}
+	}
+
+	return sub_clk_cnt;
+}
+
 static void init_clks(struct platform_device *pdev, struct clk **clk)
 {
 	int i;
@@ -506,6 +561,7 @@ static struct scp *init_scp(struct platform_device *pdev,
 		struct scp_domain *scpd = &scp->domains[i];
 		struct generic_pm_domain *genpd = &scpd->genpd;
 		const struct scp_domain_data *data = &scp_domain_data[i];
+		int clk_cnt;
 
 		pd_data->domains[i] = genpd;
 		scpd->scp = scp;
@@ -534,6 +590,18 @@ static struct scp *init_scp(struct platform_device *pdev,
 						data->basic_clk_id[j]);
 		}
 
+		if (data->subsys_clk_prefix) {
+			clk_cnt = init_subsys_clks(pdev,
+					data->subsys_clk_prefix,
+					scpd->subsys_clk);
+			if (clk_cnt < 0) {
+				dev_err(&pdev->dev,
+					"%s: subsys clk unavailable\n",
+					data->name);
+				return ERR_PTR(clk_cnt);
+			}
+		}
+
 		genpd->name = data->name;
 		genpd->power_off = scpsys_power_off;
 		genpd->power_on = scpsys_power_on;
-- 
1.8.1.1.dirty


  parent reply	other threads:[~2019-08-28  9:12 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28  9:11 [PATCH v7 00/13] Mediatek MT8183 scpsys support Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 01/13] dt-bindings: mediatek: Add property to mt8183 smi-common Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 02/13] dt-bindings: soc: Add MT8183 power dt-bindings Weiyi Lu
2019-08-28  9:39   ` Matthias Brugger
2019-10-08  1:25     ` Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 03/13] soc: mediatek: Refactor polling timeout and documentation Weiyi Lu
2019-08-28  9:43   ` Matthias Brugger
2019-08-28  9:11 ` [PATCH v7 04/13] soc: mediatek: Refactor regulator control Weiyi Lu
2019-08-28  9:44   ` Matthias Brugger
2019-08-28  9:11 ` [PATCH v7 05/13] soc: mediatek: Refactor clock control Weiyi Lu
2019-08-28  9:46   ` Matthias Brugger
2019-08-28  9:11 ` [PATCH v7 06/13] soc: mediatek: Refactor sram control Weiyi Lu
2019-08-28 10:22   ` Matthias Brugger
2019-08-28  9:11 ` [PATCH v7 07/13] soc: mediatek: Refactor bus protection control Weiyi Lu
2019-08-28 10:28   ` Matthias Brugger
2019-08-28  9:11 ` [PATCH v7 08/13] soc: mediatek: Add basic_clk_id to scp_power_data Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 09/13] soc: mediatek: Add multiple step bus protection control Weiyi Lu
2019-08-28  9:11 ` Weiyi Lu [this message]
2019-08-28  9:11 ` [PATCH v7 11/13] soc: mediatek: Add extra sram control Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 12/13] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2019-08-28  9:11 ` [PATCH v7 13/13] arm64: dts: Add power controller device node of MT8183 Weiyi Lu
2019-08-29  5:15   ` CK Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566983506-26598-11-git-send-email-weiyi.lu@mediatek.com \
    --to=weiyi.lu@mediatek.com \
    --cc=drinkcat@chromium.org \
    --cc=fan.chen@mediatek.com \
    --cc=jamesjj.liao@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --cc=yong.wu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).