public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	David Woodhouse <dwmw2@infradead.org>,
	Alex Williamson <alex.williamson@redhat.com>,
	Jean-Philippe Brucker <jean-philippe@linaro.com>
Cc: "Yi Liu" <yi.l.liu@intel.com>,
	"Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>,
	"Christoph Hellwig" <hch@infradead.org>,
	"Lu Baolu" <baolu.lu@linux.intel.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Eric Auger <eric.auger@redhat.com>,
	Jacob Pan <jacob.jun.pan@linux.intel.com>
Subject: [PATCH v6 01/10] iommu/vt-d: Enlightened PASID allocation
Date: Tue, 22 Oct 2019 16:53:14 -0700	[thread overview]
Message-ID: <1571788403-42095-2-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1571788403-42095-1-git-send-email-jacob.jun.pan@linux.intel.com>

From: Lu Baolu <baolu.lu@linux.intel.com>

If Intel IOMMU runs in caching mode, a.k.a. virtual IOMMU, the
IOMMU driver should rely on the emulation software to allocate
and free PASID IDs. The Intel vt-d spec revision 3.0 defines a
register set to support this. This includes a capability register,
a virtual command register and a virtual response register. Refer
to section 10.4.42, 10.4.43, 10.4.44 for more information.

This patch adds the enlightened PASID allocation/free interfaces
via the virtual command register.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
 drivers/iommu/intel-pasid.c | 83 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/iommu/intel-pasid.h | 13 ++++++-
 include/linux/intel-iommu.h |  2 ++
 3 files changed, 97 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/intel-pasid.c b/drivers/iommu/intel-pasid.c
index 040a445be300..76bcbb21e112 100644
--- a/drivers/iommu/intel-pasid.c
+++ b/drivers/iommu/intel-pasid.c
@@ -63,6 +63,89 @@ void *intel_pasid_lookup_id(int pasid)
 	return p;
 }
 
+static int check_vcmd_pasid(struct intel_iommu *iommu)
+{
+	u64 cap;
+
+	if (!ecap_vcs(iommu->ecap)) {
+		pr_warn("IOMMU: %s: Hardware doesn't support virtual command\n",
+			iommu->name);
+		return -ENODEV;
+	}
+
+	cap = dmar_readq(iommu->reg + DMAR_VCCAP_REG);
+	if (!(cap & DMA_VCS_PAS)) {
+		pr_warn("IOMMU: %s: Emulation software doesn't support PASID allocation\n",
+			iommu->name);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int vcmd_alloc_pasid(struct intel_iommu *iommu, unsigned int *pasid)
+{
+	u64 res;
+	u8 status_code;
+	unsigned long flags;
+	int ret = 0;
+
+	ret = check_vcmd_pasid(iommu);
+	if (ret)
+		return ret;
+
+	raw_spin_lock_irqsave(&iommu->register_lock, flags);
+	dmar_writeq(iommu->reg + DMAR_VCMD_REG, VCMD_CMD_ALLOC);
+	IOMMU_WAIT_OP(iommu, DMAR_VCRSP_REG, dmar_readq,
+		      !(res & VCMD_VRSP_IP), res);
+	raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	status_code = VCMD_VRSP_SC(res);
+	switch (status_code) {
+	case VCMD_VRSP_SC_SUCCESS:
+		*pasid = VCMD_VRSP_RESULT(res);
+		break;
+	case VCMD_VRSP_SC_NO_PASID_AVAIL:
+		pr_info("IOMMU: %s: No PASID available\n", iommu->name);
+		ret = -ENOMEM;
+		break;
+	default:
+		ret = -ENODEV;
+		pr_warn("IOMMU: %s: Unexpected error code %d\n",
+			iommu->name, status_code);
+	}
+
+	return ret;
+}
+
+void vcmd_free_pasid(struct intel_iommu *iommu, unsigned int pasid)
+{
+	u64 res;
+	u8 status_code;
+	unsigned long flags;
+
+	if (check_vcmd_pasid(iommu))
+		return;
+
+	raw_spin_lock_irqsave(&iommu->register_lock, flags);
+	dmar_writeq(iommu->reg + DMAR_VCMD_REG, (pasid << 8) | VCMD_CMD_FREE);
+	IOMMU_WAIT_OP(iommu, DMAR_VCRSP_REG, dmar_readq,
+		      !(res & VCMD_VRSP_IP), res);
+	raw_spin_unlock_irqrestore(&iommu->register_lock, flags);
+
+	status_code = VCMD_VRSP_SC(res);
+	switch (status_code) {
+	case VCMD_VRSP_SC_SUCCESS:
+		break;
+	case VCMD_VRSP_SC_INVALID_PASID:
+		pr_info("IOMMU: %s: Invalid PASID\n", iommu->name);
+		break;
+	default:
+		pr_warn("IOMMU: %s: Unexpected error code %d\n",
+			iommu->name, status_code);
+	}
+}
+
 /*
  * Per device pasid table management:
  */
diff --git a/drivers/iommu/intel-pasid.h b/drivers/iommu/intel-pasid.h
index fc8cd8f17de1..e413e884e685 100644
--- a/drivers/iommu/intel-pasid.h
+++ b/drivers/iommu/intel-pasid.h
@@ -23,6 +23,16 @@
 #define is_pasid_enabled(entry)		(((entry)->lo >> 3) & 0x1)
 #define get_pasid_dir_size(entry)	(1 << ((((entry)->lo >> 9) & 0x7) + 7))
 
+/* Virtual command interface for enlightened pasid management. */
+#define VCMD_CMD_ALLOC			0x1
+#define VCMD_CMD_FREE			0x2
+#define VCMD_VRSP_IP			0x1
+#define VCMD_VRSP_SC(e)			(((e) >> 1) & 0x3)
+#define VCMD_VRSP_SC_SUCCESS		0
+#define VCMD_VRSP_SC_NO_PASID_AVAIL	1
+#define VCMD_VRSP_SC_INVALID_PASID	1
+#define VCMD_VRSP_RESULT(e)		(((e) >> 8) & 0xfffff)
+
 /*
  * Domain ID reserved for pasid entries programmed for first-level
  * only and pass-through transfer modes.
@@ -95,5 +105,6 @@ int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
 				   struct device *dev, int pasid);
 void intel_pasid_tear_down_entry(struct intel_iommu *iommu,
 				 struct device *dev, int pasid);
-
+int vcmd_alloc_pasid(struct intel_iommu *iommu, unsigned int *pasid);
+void vcmd_free_pasid(struct intel_iommu *iommu, unsigned int pasid);
 #endif /* __INTEL_PASID_H */
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index ed11ef594378..eea7468694a7 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -161,6 +161,7 @@
 #define ecap_smpwc(e)		(((e) >> 48) & 0x1)
 #define ecap_flts(e)		(((e) >> 47) & 0x1)
 #define ecap_slts(e)		(((e) >> 46) & 0x1)
+#define ecap_vcs(e)		(((e) >> 44) & 0x1)
 #define ecap_smts(e)		(((e) >> 43) & 0x1)
 #define ecap_dit(e)		((e >> 41) & 0x1)
 #define ecap_pasid(e)		((e >> 40) & 0x1)
@@ -279,6 +280,7 @@
 
 /* PRS_REG */
 #define DMA_PRS_PPR	((u32)1)
+#define DMA_VCS_PAS	((u64)1)
 
 #define IOMMU_WAIT_OP(iommu, offset, op, cond, sts)			\
 do {									\
-- 
2.7.4


  reply	other threads:[~2019-10-22 23:49 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-22 23:53 [PATCH v6 00/10] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2019-10-22 23:53 ` Jacob Pan [this message]
2019-10-23  0:45   ` [PATCH v6 01/10] iommu/vt-d: Enlightened PASID allocation Raj, Ashok
2019-10-23  1:53     ` Lu Baolu
2019-10-23 17:55       ` Jacob Pan
2019-10-23 21:11         ` Jacob Pan
2019-10-25  1:42           ` Lu Baolu
2019-10-25  1:39         ` Lu Baolu
2019-10-22 23:53 ` [PATCH v6 02/10] iommu/vt-d: Add custom allocator for IOASID Jacob Pan
2019-10-23  0:51   ` Raj, Ashok
2019-10-23  2:21     ` Lu Baolu
2019-10-23 23:01       ` Jacob Pan
2019-10-25  1:44         ` Lu Baolu
2019-10-23  4:04     ` Jacob Pan
2019-10-23 23:04       ` Jacob Pan
2019-10-22 23:53 ` [PATCH v6 03/10] iommu/vt-d: Replace Intel specific PASID allocator with IOASID Jacob Pan
2019-10-23  0:58   ` Raj, Ashok
2019-10-23  4:19     ` Jacob Pan
2019-10-22 23:53 ` [PATCH v6 04/10] iommu/vt-d: Move domain helper to header Jacob Pan
2019-10-22 23:53 ` [PATCH v6 05/10] iommu/vt-d: Avoid duplicated code for PASID setup Jacob Pan
2019-10-22 23:53 ` [PATCH v6 06/10] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-10-22 23:53 ` [PATCH v6 07/10] iommu/vt-d: Misc macro clean up for SVM Jacob Pan
2019-10-22 23:53 ` [PATCH v6 08/10] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-10-22 23:53 ` [PATCH v6 09/10] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-10-22 23:53 ` [PATCH v6 10/10] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-10-23  0:27 ` [PATCH v6 00/10] Nested Shared Virtual Address (SVA) VT-d support Raj, Ashok
2019-10-23 13:46   ` Jacob Pan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1571788403-42095-2-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.jun.pan@linux.intel.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=eric.auger@redhat.com \
    --cc=hch@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jean-philippe@linaro.com \
    --cc=jic23@kernel.org \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox