From: Jacob Pan <jacob.jun.pan@linux.intel.com>
To: iommu@lists.linux-foundation.org,
LKML <linux-kernel@vger.kernel.org>,
Joerg Roedel <joro@8bytes.org>,
"Lu Baolu" <baolu.lu@linux.intel.com>,
David Woodhouse <dwmw2@infradead.org>
Cc: "Tian, Kevin" <kevin.tian@intel.com>,
Raj Ashok <ashok.raj@intel.com>, "Yi Liu" <yi.l.liu@intel.com>,
Eric Auger <eric.auger@redhat.com>,
Jacob Pan <jacob.jun.pan@linux.intel.com>,
Liu@vger.kernel.org
Subject: [PATCH v8 08/10] iommu/vt-d: Add custom allocator for IOASID
Date: Mon, 16 Dec 2019 11:24:10 -0800 [thread overview]
Message-ID: <1576524252-79116-9-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1576524252-79116-1-git-send-email-jacob.jun.pan@linux.intel.com>
When VT-d driver runs in the guest, PASID allocation must be
performed via virtual command interface. This patch registers a
custom IOASID allocator which takes precedence over the default
XArray based allocator. The resulting IOASID allocation will always
come from the host. This ensures that PASID namespace is system-
wide.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Liu, Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
---
drivers/iommu/intel-iommu.c | 75 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/intel-iommu.h | 2 ++
2 files changed, 77 insertions(+)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index e90102c7540d..b0c0bb6f740e 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1700,6 +1700,9 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
if (ecap_prs(iommu->ecap))
intel_svm_finish_prq(iommu);
}
+ if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap))
+ ioasid_unregister_allocator(&iommu->pasid_allocator);
+
#endif
}
@@ -3181,6 +3184,75 @@ static int copy_translation_tables(struct intel_iommu *iommu)
return ret;
}
+#ifdef CONFIG_INTEL_IOMMU_SVM
+static ioasid_t intel_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
+{
+ struct intel_iommu *iommu = data;
+ ioasid_t ioasid;
+
+ /*
+ * VT-d virtual command interface always uses the full 20 bit
+ * PASID range. Host can partition guest PASID range based on
+ * policies but it is out of guest's control.
+ */
+ if (min < PASID_MIN || max > intel_pasid_max_id)
+ return INVALID_IOASID;
+
+ if (vcmd_alloc_pasid(iommu, &ioasid))
+ return INVALID_IOASID;
+
+ return ioasid;
+}
+
+static void intel_ioasid_free(ioasid_t ioasid, void *data)
+{
+ struct intel_iommu *iommu = data;
+
+ if (!iommu)
+ return;
+ /*
+ * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
+ * We can only free the PASID when all the devices are unbound.
+ */
+ if (ioasid_find(NULL, ioasid, NULL)) {
+ pr_alert("Cannot free active IOASID %d\n", ioasid);
+ return;
+ }
+ vcmd_free_pasid(iommu, ioasid);
+}
+
+static void register_pasid_allocator(struct intel_iommu *iommu)
+{
+ if (!intel_iommu_sm) {
+ pr_warn("VT-d scalable mode not enabled\n");
+ return;
+ }
+
+ /*
+ * Register a custom PASID allocator if we are running in a guest,
+ * guest PASID must be obtained via virtual command interface.
+ * There can be multiple vIOMMUs in each guest but only one allocator
+ * is active. All vIOMMU allocators will eventually be calling the same
+ * host allocator.
+ */
+ if (ecap_vcs(iommu->ecap) && vccap_pasid(iommu->vccap)) {
+ pr_info("Register custom PASID allocator\n");
+ iommu->pasid_allocator.alloc = intel_ioasid_alloc;
+ iommu->pasid_allocator.free = intel_ioasid_free;
+ iommu->pasid_allocator.pdata = (void *)iommu;
+ if (!ioasid_register_allocator(&iommu->pasid_allocator)) {
+ pr_warn("Custom PASID allocator failed, scalable mode disabled\n");
+ /*
+ * Disable scalable mode on this IOMMU if there
+ * is no custom allocator. Mixing SM capable vIOMMU
+ * and non-SM vIOMMU are not supported.
+ */
+ intel_iommu_sm = 0;
+ }
+ }
+}
+#endif
+
static int __init init_dmars(void)
{
struct dmar_drhd_unit *drhd;
@@ -3298,6 +3370,9 @@ static int __init init_dmars(void)
*/
for_each_active_iommu(iommu, drhd) {
iommu_flush_write_buffer(iommu);
+#ifdef CONFIG_INTEL_IOMMU_SVM
+ register_pasid_allocator(iommu);
+#endif
iommu_set_root_entry(iommu);
iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index 1e11560b0e59..8c30b23bd838 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -19,6 +19,7 @@
#include <linux/iommu.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/dmar.h>
+#include <linux/ioasid.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
@@ -557,6 +558,7 @@ struct intel_iommu {
#ifdef CONFIG_INTEL_IOMMU_SVM
struct page_req_dsc *prq;
unsigned char prq_name[16]; /* Name for PRQ interrupt */
+ struct ioasid_allocator_ops pasid_allocator; /* Custom allocator for PASIDs */
#endif
struct q_inval *qi; /* Queued invalidation info */
u32 *iommu_state; /* Store iommu states between suspend and resume.*/
--
2.7.4
next prev parent reply other threads:[~2019-12-16 20:11 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 19:24 [PATCH v8 00/10] Nested Shared Virtual Address (SVA) VT-d support Jacob Pan
2019-12-16 19:24 ` [PATCH v8 01/10] iommu/vt-d: Move domain helper to header Jacob Pan
2019-12-16 19:24 ` [PATCH v8 02/10] iommu/vt-d: Add nested translation helper function Jacob Pan
2019-12-18 2:01 ` Lu Baolu
2020-01-09 17:51 ` Jacob Pan
2019-12-18 2:41 ` Lu Baolu
2020-01-09 18:39 ` Jacob Pan
2020-01-10 1:15 ` Lu Baolu
2020-01-10 18:25 ` Jacob Pan
2019-12-16 19:24 ` [PATCH v8 03/10] iommu/vt-d: Add bind guest PASID support Jacob Pan
2019-12-18 3:14 ` Lu Baolu
2020-01-09 21:45 ` Jacob Pan
2019-12-16 19:24 ` [PATCH v8 04/10] iommu/vt-d: Support flushing more translation cache types Jacob Pan
2019-12-19 2:46 ` Lu Baolu
2020-01-09 21:50 ` Jacob Pan
2020-01-10 1:17 ` Lu Baolu
2019-12-16 19:24 ` [PATCH v8 05/10] iommu/vt-d: Add svm/sva invalidate function Jacob Pan
2019-12-16 19:24 ` [PATCH v8 06/10] iommu/vt-d: Cache virtual command capability register Jacob Pan
2019-12-18 3:25 ` Lu Baolu
2020-01-09 21:59 ` Jacob Pan
2019-12-16 19:24 ` [PATCH v8 07/10] iommu/vt-d: Enlightened PASID allocation Jacob Pan
2019-12-16 19:24 ` Jacob Pan [this message]
2019-12-18 4:10 ` [PATCH v8 08/10] iommu/vt-d: Add custom allocator for IOASID Lu Baolu
2020-01-09 22:06 ` Jacob Pan
2020-01-10 1:19 ` Lu Baolu
2019-12-16 19:24 ` [PATCH v8 09/10] iommu/ioasid: Add notifier for status change Jacob Pan
2019-12-16 19:24 ` [PATCH v8 10/10] iommu/vt-d: Handle IOASID notifications Jacob Pan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576524252-79116-9-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan@linux.intel.com \
--cc=Liu@vger.kernel.org \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox