From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org,
Paul Gortmaker <paul.gortmaker@windriver.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH 02/18] mfd: stmpe-i2c: Make it explicitly non-modular
Date: Wed, 18 Dec 2019 15:48:41 -0500 [thread overview]
Message-ID: <1576702137-25905-3-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1576702137-25905-1-git-send-email-paul.gortmaker@windriver.com>
The Kconfig currently controlling compilation of this code is:
drivers/mfd/Kconfig:config STMPE_I2C
drivers/mfd/Kconfig: bool "STMicroelectronics STMPE I2C Interface"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only. In
doing so stmpe_remove itself becomes orphaned, so it gets removed too.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers. As this makes stmpe_remove an orphaned
function, it gets removed too.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/mfd/stmpe-i2c.c | 23 ++---------------------
drivers/mfd/stmpe.c | 14 --------------
drivers/mfd/stmpe.h | 1 -
3 files changed, 2 insertions(+), 36 deletions(-)
diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index 61aa020199f5..9d3e9443225a 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -12,7 +12,7 @@
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/types.h>
#include <linux/of_device.h>
#include "stmpe.h"
@@ -64,7 +64,6 @@ static const struct of_device_id stmpe_of_match[] = {
{ .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
{},
};
-MODULE_DEVICE_TABLE(of, stmpe_of_match);
static int
stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
@@ -91,13 +90,6 @@ stmpe_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
return stmpe_probe(&i2c_ci, partnum);
}
-static int stmpe_i2c_remove(struct i2c_client *i2c)
-{
- struct stmpe *stmpe = dev_get_drvdata(&i2c->dev);
-
- return stmpe_remove(stmpe);
-}
-
static const struct i2c_device_id stmpe_i2c_id[] = {
{ "stmpe610", STMPE610 },
{ "stmpe801", STMPE801 },
@@ -109,7 +101,6 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
{ "stmpe2403", STMPE2403 },
{ }
};
-MODULE_DEVICE_TABLE(i2c, stmpe_id);
static struct i2c_driver stmpe_i2c_driver = {
.driver = {
@@ -118,9 +109,9 @@ static struct i2c_driver stmpe_i2c_driver = {
.pm = &stmpe_dev_pm_ops,
#endif
.of_match_table = stmpe_of_match,
+ .suppress_bind_attrs = true,
},
.probe = stmpe_i2c_probe,
- .remove = stmpe_i2c_remove,
.id_table = stmpe_i2c_id,
};
@@ -129,13 +120,3 @@ static int __init stmpe_init(void)
return i2c_add_driver(&stmpe_i2c_driver);
}
subsys_initcall(stmpe_init);
-
-static void __exit stmpe_exit(void)
-{
- i2c_del_driver(&stmpe_i2c_driver);
-}
-module_exit(stmpe_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("STMPE MFD I2C Interface Driver");
-MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 1aee3b3253fc..611f1d8243b9 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1492,20 +1492,6 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
return ret;
}
-int stmpe_remove(struct stmpe *stmpe)
-{
- if (!IS_ERR(stmpe->vio))
- regulator_disable(stmpe->vio);
- if (!IS_ERR(stmpe->vcc))
- regulator_disable(stmpe->vcc);
-
- __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
-
- mfd_remove_devices(stmpe->dev);
-
- return 0;
-}
-
#ifdef CONFIG_PM
static int stmpe_suspend(struct device *dev)
{
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 83491e99ba3c..ba9006b7f8f4 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -98,7 +98,6 @@ struct stmpe_client_info {
};
int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum);
-int stmpe_remove(struct stmpe *stmpe);
#define STMPE_ICR_LSB_HIGH (1 << 2)
#define STMPE_ICR_LSB_EDGE (1 << 1)
--
2.7.4
next prev parent reply other threads:[~2019-12-18 20:49 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-18 20:48 [PATCH 00/18] mfd: demodularization of non-modular drivers Paul Gortmaker
2019-12-18 20:48 ` [PATCH 01/18] mfd: stmpe-spi: Make it explicitly non-modular Paul Gortmaker
2019-12-18 20:48 ` Paul Gortmaker [this message]
2019-12-18 20:48 ` [PATCH 03/18] mfd: ezx-pcap: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 04/18] mfd: 88pm860x-*: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 05/18] mfd: tc3589: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 06/18] mfd: tc6387xb: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 07/18] mfd: tc6393xb: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 08/18] mfd: twl4030-audio: " Paul Gortmaker
2019-12-20 8:43 ` Peter Ujfalusi
2019-12-18 20:48 ` [PATCH 09/18] mfd: twl4030-power: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 10/18] mfd: twl6040: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 11/18] mfd: t7l66xb: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 12/18] mfd: lp8788: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 13/18] mfd: menelaus: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 14/18] mfd: tps6586x: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 15/18] mfd: omap-usb-tll: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 16/18] mfd: omap-usb-host: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 17/18] mfd: palmas: " Paul Gortmaker
2019-12-18 20:48 ` [PATCH 18/18] mfd: intel_soc_pmic_core: " Paul Gortmaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576702137-25905-3-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=alexandre.torgue@st.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox