From: Elliot Berman <eberman@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
agross@kernel.org, swboyd@chromium.org,
Stephan Gerhold <stephan@gerhold.net>
Cc: Elliot Berman <eberman@codeaurora.org>,
saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
sidgup@codeaurora.org, psodagud@codeaurora.org,
Brian Masney <masneyb@onstation.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver
Date: Tue, 7 Jan 2020 13:04:09 -0800 [thread overview]
Message-ID: <1578431066-19600-1-git-send-email-eberman@codeaurora.org> (raw)
This series improves support for 32-bit Qualcomm targets on qcom_scm driver and cleans
up the driver for 64-bit implementations.
Currently, the qcom_scm driver supports only 64-bit Qualcomm targets and very
old 32-bit Qualcomm targets. Newer 32-bit targets use ARM's SMC Calling
Convention to communicate with secure world. Older 32-bit targets use a
"buffer-based" legacy approach for communicating with secure world (as
implemented in qcom_scm-32.c). All arm64 Qualcomm targets use ARM SMCCC.
Currently, SMCCC-based communication is enabled only on ARM64 config and
buffer-based communication only on ARM config. This patch-series combines SMCCC
and legacy conventions and selects the correct convention by querying the secure
world [1].
We decided to take the opportunity as well to clean up the driver rather than
try to patch together qcom_scm-32 and qcom_scm-64.
Patches 1-3 and 15 improve macro names, reorder macros/functions, and prune unused
macros/functions. No functional changes were introduced.
Patches 4-8 clears up the SCM abstraction in qcom_scm-64.
Patches 9-14 clears up the SCM abstraction in qcom_scm-32.
Patches 16-17 enable dynamically using the different calling conventions.
[1]: https://source.codeaurora.org/quic/la/kernel/msm-4.9/tree/drivers/soc/qcom/scm.c?h=kernel.lnx.4.9.r28-rel#n555
Changes since v4:
- Restored missing arginfo/args to pas_auth_and_reset
Changes since v3:
- Updated recepients
Changes since v2:
- Addressed Stephen's comments throughout v2.
- Rebased onto latest for-next branch
- Removed v2 08/18 (firmware: qcom_scm-64: Remove qcom_scm_call_do_smccc)
- Cleaned up the convention query from v2 to align with [1].
Changes since v1:
- Renamed functions/variables per Vinod's suggestions
- Split v1 01/17 into v2 [01,02,03]/18 per Vinod's suggestion
- Fix suggestions by Bjorn in v1 09/18 (now v2 10/18)
- Refactor last 3 commits per Bjorn suggestions in v1 17/18 and v1 10/18
Changes since RFC:
- Fixed missing return values in qcom_scm_call_smccc
- Fixed order of arguments in qcom_scm_set_warm_boot_addr
- Adjusted logic of SMC convention to properly support older QCOM secure worlds
- Boot tested on IFC6410 based on linaro kernel tag:
debian-qcom-dragonboard410c-18.01 (which does basic verification of legacy
SCM calls: at least warm_boot_addr, cold_boot_addr, and power_down)
Elliot Berman (17):
firmware: qcom_scm: Rename macros and structures
firmware: qcom_scm: Apply consistent naming scheme to command IDs
firmware: qcom_scm: Remove unused qcom_scm_get_version
firmware: qcom_scm-64: Make SMC macros less magical
firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc
firmware: qcom_scm-64: Add SCM results struct
firmware: qcom_scm-64: Move SMC register filling to
qcom_scm_call_smccc
firmware: qcom_scm-64: Improve SMC convention detection
firmware: qcom_scm-32: Use SMC arch wrappers
firmware: qcom_scm-32: Add funcnum IDs
firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls
firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call
firmware: qcom_scm-32: Create common legacy atomic call
firmware: qcom_scm-32: Add device argument to atomic calls
firmware: qcom_scm: Order functions, definitions by service/command
firmware: qcom_scm: Remove thin wrappers
firmware: qcom_scm: Dynamically support SMCCC and legacy conventions
drivers/firmware/Kconfig | 8 -
drivers/firmware/Makefile | 5 +-
drivers/firmware/qcom_scm-32.c | 671 -----------------------------
drivers/firmware/qcom_scm-64.c | 579 -------------------------
drivers/firmware/qcom_scm-legacy.c | 242 +++++++++++
drivers/firmware/qcom_scm-smc.c | 151 +++++++
drivers/firmware/qcom_scm.c | 854 +++++++++++++++++++++++++++++--------
drivers/firmware/qcom_scm.h | 178 ++++----
include/linux/qcom_scm.h | 125 +++---
9 files changed, 1232 insertions(+), 1581 deletions(-)
delete mode 100644 drivers/firmware/qcom_scm-32.c
delete mode 100644 drivers/firmware/qcom_scm-64.c
create mode 100644 drivers/firmware/qcom_scm-legacy.c
create mode 100644 drivers/firmware/qcom_scm-smc.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2020-01-07 21:04 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 21:04 Elliot Berman [this message]
2020-01-07 21:04 ` [PATCH v5 01/17] firmware: qcom_scm: Rename macros and structures Elliot Berman
2020-01-07 21:04 ` [PATCH v5 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2020-01-07 21:04 ` [PATCH v5 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2020-01-07 21:04 ` [PATCH v5 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2020-01-07 21:04 ` [PATCH v5 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2020-01-07 21:04 ` [PATCH v5 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2020-01-07 21:04 ` [PATCH v5 16/17] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2020-01-08 7:02 ` Stephen Boyd
2020-01-08 6:42 ` [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Bjorn Andersson
2020-01-08 6:54 ` Stephen Boyd
2020-01-08 7:21 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578431066-19600-1-git-send-email-eberman@codeaurora.org \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox