public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Elliot Berman <eberman@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	agross@kernel.org, swboyd@chromium.org,
	Stephan Gerhold <stephan@gerhold.net>
Cc: Elliot Berman <eberman@codeaurora.org>,
	saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
	sidgup@codeaurora.org, psodagud@codeaurora.org,
	Brian Masney <masneyb@onstation.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 01/17] firmware: qcom_scm: Rename macros and structures
Date: Tue,  7 Jan 2020 13:04:10 -0800	[thread overview]
Message-ID: <1578431066-19600-2-git-send-email-eberman@codeaurora.org> (raw)
In-Reply-To: <1578431066-19600-1-git-send-email-eberman@codeaurora.org>

Rename legacy-specific structures and macros with legacy prefix; rename
smc-specific structures and macros with smc prefix. This should make it
clearer which structures are generic to "SCM" and which are specfically
for implementing the convention.

Change-Id: I501e38377f063e2ee27c1bc4b0a17426bb6e556e
Tested-by: Brian Masney <masneyb@onstation.org> # arm32
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
 drivers/firmware/qcom_scm-32.c | 71 ++++++++++++++++++++++--------------------
 drivers/firmware/qcom_scm-64.c | 53 +++++++++++++++----------------
 2 files changed, 64 insertions(+), 60 deletions(-)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 48e2ef7..2542c42 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  */
 
@@ -39,30 +39,30 @@ static struct qcom_scm_entry qcom_scm_wb[] = {
 static DEFINE_MUTEX(qcom_scm_lock);
 
 /**
- * struct qcom_scm_command - one SCM command buffer
+ * struct scm_legacy_command - one SCM command buffer
  * @len: total available memory for command and response
  * @buf_offset: start of command buffer
  * @resp_hdr_offset: start of response buffer
  * @id: command to be executed
- * @buf: buffer returned from qcom_scm_get_command_buffer()
+ * @buf: buffer returned from scm_legacy_get_command_buffer()
  *
  * An SCM command is laid out in memory as follows:
  *
- *	------------------- <--- struct qcom_scm_command
+ *	------------------- <--- struct scm_legacy_command
  *	| command header  |
- *	------------------- <--- qcom_scm_get_command_buffer()
+ *	------------------- <--- scm_legacy_get_command_buffer()
  *	| command buffer  |
- *	------------------- <--- struct qcom_scm_response and
- *	| response header |      qcom_scm_command_to_response()
- *	------------------- <--- qcom_scm_get_response_buffer()
+ *	------------------- <--- struct scm_legacy_response and
+ *	| response header |      scm_legacy_command_to_response()
+ *	------------------- <--- scm_legacy_get_response_buffer()
  *	| response buffer |
  *	-------------------
  *
  * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate qcom_scm_get_*_buffer() routines
+ * you should always use the appropriate scm_legacy_get_*_buffer() routines
  * to access the buffers in a safe manner.
  */
-struct qcom_scm_command {
+struct scm_legacy_command {
 	__le32 len;
 	__le32 buf_offset;
 	__le32 resp_hdr_offset;
@@ -71,52 +71,54 @@ struct qcom_scm_command {
 };
 
 /**
- * struct qcom_scm_response - one SCM response buffer
+ * struct scm_legacy_response - one SCM response buffer
  * @len: total available memory for response
- * @buf_offset: start of response data relative to start of qcom_scm_response
+ * @buf_offset: start of response data relative to start of scm_legacy_response
  * @is_complete: indicates if the command has finished processing
  */
-struct qcom_scm_response {
+struct scm_legacy_response {
 	__le32 len;
 	__le32 buf_offset;
 	__le32 is_complete;
 };
 
 /**
- * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response
+ * scm_legacy_command_to_response() - Get a pointer to a scm_legacy_response
  * @cmd: command
  *
  * Returns a pointer to a response for a command.
  */
-static inline struct qcom_scm_response *qcom_scm_command_to_response(
-		const struct qcom_scm_command *cmd)
+static inline struct scm_legacy_response *scm_legacy_command_to_response(
+		const struct scm_legacy_command *cmd)
 {
 	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
 }
 
 /**
- * qcom_scm_get_command_buffer() - Get a pointer to a command buffer
+ * scm_legacy_get_command_buffer() - Get a pointer to a command buffer
  * @cmd: command
  *
  * Returns a pointer to the command buffer of a command.
  */
-static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd)
+static inline void *scm_legacy_get_command_buffer(
+		const struct scm_legacy_command *cmd)
 {
 	return (void *)cmd->buf;
 }
 
 /**
- * qcom_scm_get_response_buffer() - Get a pointer to a response buffer
+ * scm_legacy_get_response_buffer() - Get a pointer to a response buffer
  * @rsp: response
  *
  * Returns a pointer to a response buffer of a response.
  */
-static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp)
+static inline void *scm_legacy_get_response_buffer(
+		const struct scm_legacy_response *rsp)
 {
 	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
 }
 
-static u32 smc(u32 cmd_addr)
+static u32 __scm_legacy_do(u32 cmd_addr)
 {
 	int context_id;
 	register u32 r0 asm("r0") = 1;
@@ -164,8 +166,8 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 			 size_t resp_len)
 {
 	int ret;
-	struct qcom_scm_command *cmd;
-	struct qcom_scm_response *rsp;
+	struct scm_legacy_command *cmd;
+	struct scm_legacy_response *rsp;
 	size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len;
 	dma_addr_t cmd_phys;
 
@@ -179,9 +181,9 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 
 	cmd->id = cpu_to_le32((svc_id << 10) | cmd_id);
 	if (cmd_buf)
-		memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+		memcpy(scm_legacy_get_command_buffer(cmd), cmd_buf, cmd_len);
 
-	rsp = qcom_scm_command_to_response(cmd);
+	rsp = scm_legacy_command_to_response(cmd);
 
 	cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(dev, cmd_phys)) {
@@ -190,7 +192,7 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 	}
 
 	mutex_lock(&qcom_scm_lock);
-	ret = smc(cmd_phys);
+	ret = __scm_legacy_do(cmd_phys);
 	if (ret < 0)
 		ret = qcom_scm_remap_error(ret);
 	mutex_unlock(&qcom_scm_lock);
@@ -206,7 +208,7 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 		dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len +
 					le32_to_cpu(rsp->buf_offset),
 					resp_len, DMA_FROM_DEVICE);
-		memcpy(resp_buf, qcom_scm_get_response_buffer(rsp),
+		memcpy(resp_buf, scm_legacy_get_response_buffer(rsp),
 		       resp_len);
 	}
 out:
@@ -215,11 +217,12 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 	return ret;
 }
 
-#define SCM_CLASS_REGISTER	(0x2 << 8)
-#define SCM_MASK_IRQS		BIT(5)
-#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
-				SCM_CLASS_REGISTER | \
-				SCM_MASK_IRQS | \
+#define SCM_LEGACY_CLASS_REGISTER		(0x2 << 8)
+#define SCM_LEGACY_MASK_IRQS		BIT(5)
+#define SCM_LEGACY_ATOMIC_ID(svc, cmd, n) \
+				(((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
+				SCM_LEGACY_CLASS_REGISTER | \
+				SCM_LEGACY_MASK_IRQS | \
 				(n & 0xf))
 
 /**
@@ -235,7 +238,7 @@ static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
 {
 	int context_id;
 
-	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
+	register u32 r0 asm("r0") = SCM_LEGACY_ATOMIC_ID(svc, cmd, 1);
 	register u32 r1 asm("r1") = (u32)&context_id;
 	register u32 r2 asm("r2") = arg1;
 
@@ -268,7 +271,7 @@ static s32 qcom_scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
 {
 	int context_id;
 
-	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2);
+	register u32 r0 asm("r0") = SCM_LEGACY_ATOMIC_ID(svc, cmd, 2);
 	register u32 r1 asm("r1") = (u32)&context_id;
 	register u32 r2 asm("r2") = arg1;
 	register u32 r3 asm("r3") = arg2;
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 3c58503..9c7ea74 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2015,2019 The Linux Foundation. All rights reserved.
  */
 
 #include <linux/io.h>
@@ -14,7 +14,7 @@
 
 #include "qcom_scm.h"
 
-#define QCOM_SCM_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
+#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
 
 #define MAX_QCOM_SCM_ARGS 10
 #define MAX_QCOM_SCM_RETS 3
@@ -58,11 +58,11 @@ static DEFINE_MUTEX(qcom_scm_lock);
 #define QCOM_SCM_EBUSY_WAIT_MS 30
 #define QCOM_SCM_EBUSY_MAX_RETRY 20
 
-#define N_EXT_QCOM_SCM_ARGS 7
-#define FIRST_EXT_ARG_IDX 3
-#define N_REGISTER_ARGS (MAX_QCOM_SCM_ARGS - N_EXT_QCOM_SCM_ARGS + 1)
+#define SCM_SMC_N_EXT_ARGS 7
+#define SCM_SMC_FIRST_EXT_IDX 3
+#define SCM_SMC_N_REG_ARGS (MAX_QCOM_SCM_ARGS - SCM_SMC_N_EXT_ARGS + 1)
 
-static void __qcom_scm_call_do(const struct qcom_scm_desc *desc,
+static void __scm_smc_do_quirk(const struct qcom_scm_desc *desc,
 			       struct arm_smccc_res *res, u32 fn_id,
 			       u64 x5, u32 type)
 {
@@ -85,22 +85,23 @@ static void __qcom_scm_call_do(const struct qcom_scm_desc *desc,
 	} while (res->a0 == QCOM_SCM_INTERRUPTED);
 }
 
-static void qcom_scm_call_do(const struct qcom_scm_desc *desc,
+static void __scm_smc_do(const struct qcom_scm_desc *desc,
 			     struct arm_smccc_res *res, u32 fn_id,
 			     u64 x5, bool atomic)
 {
 	int retry_count = 0;
 
 	if (atomic) {
-		__qcom_scm_call_do(desc, res, fn_id, x5, ARM_SMCCC_FAST_CALL);
+		__scm_smc_do_quirk(desc, res, fn_id, x5,
+					 ARM_SMCCC_FAST_CALL);
 		return;
 	}
 
 	do {
 		mutex_lock(&qcom_scm_lock);
 
-		__qcom_scm_call_do(desc, res, fn_id, x5,
-				   ARM_SMCCC_STD_CALL);
+		__scm_smc_do_quirk(desc, res, fn_id, x5,
+					 ARM_SMCCC_STD_CALL);
 
 		mutex_unlock(&qcom_scm_lock);
 
@@ -112,21 +113,21 @@ static void qcom_scm_call_do(const struct qcom_scm_desc *desc,
 	}  while (res->a0 == QCOM_SCM_V2_EBUSY);
 }
 
-static int ___qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
-			    const struct qcom_scm_desc *desc,
-			    struct arm_smccc_res *res, bool atomic)
+static int __scm_smc_call(struct device *dev, u32 svc_id, u32 cmd_id,
+				  const struct qcom_scm_desc *desc,
+				  struct arm_smccc_res *res, bool atomic)
 {
 	int arglen = desc->arginfo & 0xf;
 	int i;
-	u32 fn_id = QCOM_SCM_FNID(svc_id, cmd_id);
-	u64 x5 = desc->args[FIRST_EXT_ARG_IDX];
+	u32 fn_id = SCM_SMC_FNID(svc_id, cmd_id);
+	u64 x5 = desc->args[SCM_SMC_FIRST_EXT_IDX];
 	dma_addr_t args_phys = 0;
 	void *args_virt = NULL;
 	size_t alloc_len;
 	gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL;
 
-	if (unlikely(arglen > N_REGISTER_ARGS)) {
-		alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
+	if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) {
+		alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64);
 		args_virt = kzalloc(PAGE_ALIGN(alloc_len), flag);
 
 		if (!args_virt)
@@ -135,15 +136,15 @@ static int ___qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 		if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
 			__le32 *args = args_virt;
 
-			for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+			for (i = 0; i < SCM_SMC_N_EXT_ARGS; i++)
 				args[i] = cpu_to_le32(desc->args[i +
-						      FIRST_EXT_ARG_IDX]);
+						      SCM_SMC_FIRST_EXT_IDX]);
 		} else {
 			__le64 *args = args_virt;
 
-			for (i = 0; i < N_EXT_QCOM_SCM_ARGS; i++)
+			for (i = 0; i < SCM_SMC_N_EXT_ARGS; i++)
 				args[i] = cpu_to_le64(desc->args[i +
-						      FIRST_EXT_ARG_IDX]);
+						      SCM_SMC_FIRST_EXT_IDX]);
 		}
 
 		args_phys = dma_map_single(dev, args_virt, alloc_len,
@@ -157,7 +158,7 @@ static int ___qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 		x5 = args_phys;
 	}
 
-	qcom_scm_call_do(desc, res, fn_id, x5, atomic);
+	__scm_smc_do(desc, res, fn_id, x5, atomic);
 
 	if (args_virt) {
 		dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
@@ -185,7 +186,7 @@ static int qcom_scm_call(struct device *dev, u32 svc_id, u32 cmd_id,
 			 struct arm_smccc_res *res)
 {
 	might_sleep();
-	return ___qcom_scm_call(dev, svc_id, cmd_id, desc, res, false);
+	return __scm_smc_call(dev, svc_id, cmd_id, desc, res, false);
 }
 
 /**
@@ -203,7 +204,7 @@ static int qcom_scm_call_atomic(struct device *dev, u32 svc_id, u32 cmd_id,
 				const struct qcom_scm_desc *desc,
 				struct arm_smccc_res *res)
 {
-	return ___qcom_scm_call(dev, svc_id, cmd_id, desc, res, true);
+	return __scm_smc_call(dev, svc_id, cmd_id, desc, res, true);
 }
 
 /**
@@ -253,7 +254,7 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
 	struct arm_smccc_res res;
 
 	desc.arginfo = QCOM_SCM_ARGS(1);
-	desc.args[0] = QCOM_SCM_FNID(svc_id, cmd_id) |
+	desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
 			(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
 
 	ret = qcom_scm_call(dev, QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD,
@@ -307,7 +308,7 @@ void __qcom_scm_init(void)
 {
 	u64 cmd;
 	struct arm_smccc_res res;
-	u32 function = QCOM_SCM_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
+	u32 function = SCM_SMC_FNID(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD);
 
 	/* First try a SMC64 call */
 	cmd = ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2020-01-07 21:19 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07 21:04 [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Elliot Berman
2020-01-07 21:04 ` Elliot Berman [this message]
2020-01-07 21:04 ` [PATCH v5 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2020-01-07 21:04 ` [PATCH v5 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2020-01-07 21:04 ` [PATCH v5 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2020-01-07 21:04 ` [PATCH v5 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2020-01-07 21:04 ` [PATCH v5 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2020-01-07 21:04 ` [PATCH v5 16/17] firmware: qcom_scm: Remove thin wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2020-01-08  7:02   ` Stephen Boyd
2020-01-08  6:42 ` [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Bjorn Andersson
2020-01-08  6:54   ` Stephen Boyd
2020-01-08  7:21     ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1578431066-19600-2-git-send-email-eberman@codeaurora.org \
    --to=eberman@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masneyb@onstation.org \
    --cc=psodagud@codeaurora.org \
    --cc=saiprakash.ranjan@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    --cc=stephan@gerhold.net \
    --cc=swboyd@chromium.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox