[PATCH 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs

Wesley Cheng
2020-03-14T00:55:08Z

This adds the SNPS FemtoPHY driver used in QCOM SOCs. There
are potentially multiple instances of this UTMI PHY on the
SOC, all which can utilize this driver.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
---
drivers/phy/qualcomm/Kconfig | 10 ++
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-snps-7nm.c | 294 +++++++++++++++++++++++++++++++
3 files changed, 305 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-7nm.c

diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index e46824d..3158c14 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -85,6 +85,16 @@ config PHY_QCOM_USB_HS
Support for the USB high-speed ULPI compliant phy on Qualcomm
chipsets.

+config PHY_QCOM_USB_SNPS_HS_7NM
+ tristate "Qualcomm 7nm USB HS PHY module"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable support for the USB high-speed SNPS phy on Qualcomm 7nm
+ chipsets. This PHY has differences in the register map compared
+ to the 28nm variant. The PHY is paired with a Synopsys DWC3 USB
+ controller on MSM SOCs.
+
config PHY_QCOM_USB_HSIC
tristate "Qualcomm USB HSIC ULPI PHY module"
depends on USB_ULPI_BUS
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 283251d..06bdb40 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o
obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
+obj-$(CONFIG_PHY_QCOM_USB_SNPS_HS_7NM) += phy-qcom-snps-7nm.o
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-7nm.c b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
new file mode 100644
index 0000000..8d4ba53
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c)
+#define OPMODE_MASK GENMASK(4, 3)
+#define OPMODE_NORMAL (0x00)
+#define OPMODE_NONDRIVING BIT(3)
+#define SLEEPM BIT(0)
+#define TERMSEL BIT(5)
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL1 (0x40)
+#define XCVRSEL BIT(0)
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50)
+#define POR BIT(1)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54)
+#define RETENABLEN BIT(3)
+#define FSEL_MASK GENMASK(7, 5)
+#define FSEL_DEFAULT (0x3 << 4)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58)
+#define VBUSVLDEXTSEL0 BIT(4)
+#define PLLBTUNE BIT(5)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c)
+#define VREGBYPASS BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60)
+#define VBUSVLDEXT0 BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64)
+#define USB2_AUTO_RESUME BIT(0)
+#define USB2_SUSPEND_N BIT(2)
+#define USB2_SUSPEND_N_SEL BIT(3)
+
+#define USB2_PHY_USB_PHY_CFG0 (0x94)
+#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
+#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
+
+#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0)
+#define REFCLK_SEL_MASK GENMASK(1, 0)
+#define REFCLK_SEL_DEFAULT (0x2 << 0)
+
+static const char * const qcom_snps_hsphy_vreg_names[] = {
+ "vdda-pll", "vdda33", "vdda18",
+};
+
+#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
+
+/**
+ * struct qcom_snps_hsphy - structure holding snps hs phy attributes
+ *
+ * @phy: generic phy
+ * @base: iomapped memory space for qubs2 phy
+ *
+ * @cfg_ahb_clk: AHB2PHY interface clock
+ * @ref_clk: phy reference clock
+ * @iface_clk: phy interface clock
+ * @phy_reset: phy reset control
+ * @vregs: regulator supplies bulk data
+
+ * @phy_initialized: if PHY has been initialized correctly
+ *
+ */
+struct qcom_snps_hsphy {
+ struct phy *phy;
+ void __iomem *base;
+
+ struct clk *cfg_ahb_clk;
+ struct clk *ref_clk;
+ struct reset_control *phy_reset;
+ struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
+
+ bool phy_initialized;
+};
+
+static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
+ u32 mask, u32 val)
+{
+ u32 reg;
+
+ reg = readl(base + offset);
+ reg &= ~mask;
+ reg |= val & mask;
+ writel(reg, base + offset);
+
+ /* Ensure above write is completed */
+ readl(base + offset);
+}
+
+static int qcom_snps_hsphy_init(struct phy *phy)
+{
+ struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+ int ret;
+
+ dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
+
+ /* turn on regulator supplies */
+ ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+ if (ret)
+ return ret;
+
+ /* enable ahb interface clock to program phy */
+ ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
+ goto poweroff_phy;
+ }
+
+ /* Perform phy reset */
+ ret = reset_control_assert(hsphy->phy_reset);
+ if (ret) {
+ dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+
+ /* 100 us delay to keep PHY in reset mode */
+ usleep_range(100, 150);
+
+ ret = reset_control_deassert(hsphy->phy_reset);
+ if (ret) {
+ dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
+ goto disable_ahb_clk;
+ }
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
+ UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
+ UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
+ POR, POR);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
+ FSEL_MASK, 0);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+ PLLBTUNE, PLLBTUNE);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
+ REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+ VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
+ VBUSVLDEXT0, VBUSVLDEXT0);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
+ VREGBYPASS, VREGBYPASS);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+ USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
+ SLEEPM, SLEEPM);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
+ POR, 0);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ USB2_SUSPEND_N_SEL, 0);
+
+ qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
+ UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
+
+ hsphy->phy_initialized = true;
+
+ return 0;
+
+disable_ahb_clk:
+ clk_disable_unprepare(hsphy->cfg_ahb_clk);
+poweroff_phy:
+ regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+
+ return ret;
+}
+
+static int qcom_snps_hsphy_exit(struct phy *phy)
+{
+ struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+
+ reset_control_assert(hsphy->phy_reset);
+ clk_disable_unprepare(hsphy->cfg_ahb_clk);
+ regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
+ hsphy->phy_initialized = false;
+
+ return 0;
+}
+
+static const struct phy_ops qcom_snps_hsphy_gen_ops = {
+ .init = qcom_snps_hsphy_init,
+ .exit = qcom_snps_hsphy_exit,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
+ {
+ .compatible = "qcom,sm8150-usb-hs-phy",
+ },
+ {
+ .compatible = "qcom,usb-snps-hs-7nm-phy",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
+
+static int qcom_snps_hsphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_snps_hsphy *hsphy;
+ struct phy_provider *phy_provider;
+ struct phy *generic_phy;
+ struct resource *res;
+ int ret, i;
+ int num;
+
+ hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
+ if (!hsphy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hsphy->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hsphy->base))
+ return PTR_ERR(hsphy->base);
+
+ hsphy->ref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(hsphy->ref_clk)) {
+ ret = PTR_ERR(hsphy->ref_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get ref clk, %d\n", ret);
+ return ret;
+ }
+
+ hsphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
+ if (IS_ERR(hsphy->phy_reset)) {
+ dev_err(dev, "failed to get phy core reset\n");
+ return PTR_ERR(hsphy->phy_reset);
+ }
+
+ num = ARRAY_SIZE(hsphy->vregs);
+ for (i = 0; i < num; i++)
+ hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i];
+
+ ret = devm_regulator_bulk_get(dev, num, hsphy->vregs);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get regulator supplies: %d\n",
+ ret);
+ return ret;
+ }
+
+ generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
+ if (IS_ERR(generic_phy)) {
+ ret = PTR_ERR(generic_phy);
+ dev_err(dev, "failed to create phy, %d\n", ret);
+ return ret;
+ }
+ hsphy->phy = generic_phy;
+
+ dev_set_drvdata(dev, hsphy);
+ phy_set_drvdata(generic_phy, hsphy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (!IS_ERR(phy_provider))
+ dev_info(dev, "Registered Qcom-SNPS HS phy\n");
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver qcom_snps_hsphy_driver = {
+ .probe = qcom_snps_hsphy_probe,
+ .driver = {
+ .name = "qcom-snps-hs-7nm-phy",
+ .of_match_table = qcom_snps_hsphy_of_match_table,
+ },
+};
+
+module_platform_driver(qcom_snps_hsphy_driver);
+
+MODULE_DESCRIPTION("Qualcomm 7nm USB HS PHY driver");
+MODULE_LICENSE("GPL v2");