[PATCH 09/13] ARM: dts: rv1108: Assign the proper GPIO clocks

Otavio Salvador
2018-11-25T21:20:16Z

It is not correct to assign the 24MHz clock oscillator to the GPIO
ports.

Fix it by assigning the proper GPIO clocks instead.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
---

arch/arm/boot/dts/rv1108.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 442b749eb2e9..ce5509c4657b 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -562,7 +562,7 @@
compatible = "rockchip,gpio-bank";
reg = <0x20030000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>;
+ clocks = <&cru PCLK_GPIO0_PMU>;

gpio-controller;
#gpio-cells = <2>;
@@ -575,7 +575,7 @@
compatible = "rockchip,gpio-bank";
reg = <0x10310000 0x100>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>;
+ clocks = <&cru PCLK_GPIO1>;

gpio-controller;
#gpio-cells = <2>;
@@ -588,7 +588,7 @@
compatible = "rockchip,gpio-bank";
reg = <0x10320000 0x100>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>;
+ clocks = <&cru PCLK_GPIO2>;

gpio-controller;
#gpio-cells = <2>;
@@ -601,7 +601,7 @@
compatible = "rockchip,gpio-bank";
reg = <0x10330000 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>;
+ clocks = <&cru PCLK_GPIO3>;

gpio-controller;
#gpio-cells = <2>;
--
2.19.1