public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: mani@kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	hemantk@codeaurora.org, jhugo@codeaurora.org,
	Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [PATCH v4 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values are used
Date: Fri,  1 May 2020 19:32:05 -0700	[thread overview]
Message-ID: <1588386725-1165-9-git-send-email-bbhatt@codeaurora.org> (raw)
In-Reply-To: <1588386725-1165-1-git-send-email-bbhatt@codeaurora.org>

While writing any sequence or session identifiers, it is possible that
the host could write a zero value, whereas only non-zero values should
be supported writes to those registers. Ensure that the host does not
write a non-zero value for them and also log them in debug messages.

Suggested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/boot.c     | 15 +++++++--------
 drivers/bus/mhi/core/internal.h |  1 +
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/bus/mhi/core/boot.c b/drivers/bus/mhi/core/boot.c
index e5fcde1..9fe9c59 100644
--- a/drivers/bus/mhi/core/boot.c
+++ b/drivers/bus/mhi/core/boot.c
@@ -43,10 +43,7 @@ void mhi_rddm_prepare(struct mhi_controller *mhi_cntrl,
 		      lower_32_bits(mhi_buf->dma_addr));
 
 	mhi_write_reg(mhi_cntrl, base, BHIE_RXVECSIZE_OFFS, mhi_buf->len);
-	sequence_id = prandom_u32() & BHIE_RXVECSTATUS_SEQNUM_BMSK;
-
-	if (unlikely(!sequence_id))
-		sequence_id = 1;
+	sequence_id = (MHI_RANDOM_U32_NONZERO & BHIE_RXVECSTATUS_SEQNUM_BMSK);
 
 	mhi_write_reg_field(mhi_cntrl, base, BHIE_RXVECDB_OFFS,
 			    BHIE_RXVECDB_SEQNUM_BMSK, BHIE_RXVECDB_SEQNUM_SHFT,
@@ -189,7 +186,9 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 		return -EIO;
 	}
 
-	dev_dbg(dev, "Starting AMSS download via BHIe\n");
+	sequence_id = (MHI_RANDOM_U32_NONZERO & BHIE_TXVECSTATUS_SEQNUM_BMSK);
+	dev_dbg(dev, "Starting AMSS download via BHIe. Sequence ID:%u\n",
+		sequence_id);
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECADDR_HIGH_OFFS,
 		      upper_32_bits(mhi_buf->dma_addr));
 
@@ -198,7 +197,6 @@ static int mhi_fw_load_amss(struct mhi_controller *mhi_cntrl,
 
 	mhi_write_reg(mhi_cntrl, base, BHIE_TXVECSIZE_OFFS, mhi_buf->len);
 
-	sequence_id = prandom_u32() & BHIE_TXVECSTATUS_SEQNUM_BMSK;
 	mhi_write_reg_field(mhi_cntrl, base, BHIE_TXVECDB_OFFS,
 			    BHIE_TXVECDB_SEQNUM_BMSK, BHIE_TXVECDB_SEQNUM_SHFT,
 			    sequence_id);
@@ -246,14 +244,15 @@ static int mhi_fw_load_sbl(struct mhi_controller *mhi_cntrl,
 		goto invalid_pm_state;
 	}
 
-	dev_dbg(dev, "Starting SBL download via BHI\n");
+	session_id = (MHI_RANDOM_U32_NONZERO & BHI_TXDB_SEQNUM_BMSK);
+	dev_dbg(dev, "Starting SBL download via BHI. Session ID:%u\n",
+		session_id);
 	mhi_write_reg(mhi_cntrl, base, BHI_STATUS, 0);
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_HIGH,
 		      upper_32_bits(dma_addr));
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGADDR_LOW,
 		      lower_32_bits(dma_addr));
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGSIZE, size);
-	session_id = prandom_u32() & BHI_TXDB_SEQNUM_BMSK;
 	mhi_write_reg(mhi_cntrl, base, BHI_IMGTXDB, session_id);
 	read_unlock_bh(pm_lock);
 
diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
index 0965ca3..e4e6ea2 100644
--- a/drivers/bus/mhi/core/internal.h
+++ b/drivers/bus/mhi/core/internal.h
@@ -452,6 +452,7 @@ enum mhi_pm_state {
 #define PRIMARY_CMD_RING		0
 #define MHI_DEV_WAKE_DB			127
 #define MHI_MAX_MTU			0xffff
+#define MHI_RANDOM_U32_NONZERO		(prandom_u32_max(U32_MAX - 1) + 1)
 
 enum mhi_er_type {
 	MHI_ER_TYPE_INVALID = 0x0,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2020-05-02  2:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-02  2:31 [PATCH v4 0/8] Bug fixes and improved logging in MHI Bhaumik Bhatt
2020-05-02  2:31 ` [PATCH v4 1/8] bus: mhi: core: Refactor mhi queue APIs Bhaumik Bhatt
2020-05-02  2:31 ` [PATCH v4 2/8] bus: mhi: core: Cache intmod from mhi event to mhi channel Bhaumik Bhatt
2020-05-02  2:32 ` [PATCH v4 3/8] bus: mhi: core: Add range check for channel id received in event ring Bhaumik Bhatt
2020-05-02  2:32 ` [PATCH v4 4/8] bus: mhi: core: Read transfer length from an event properly Bhaumik Bhatt
2020-05-04 14:31   ` Jeffrey Hugo
2020-05-02  2:32 ` [PATCH v4 5/8] bus: mhi: core: Handle firmware load using state worker Bhaumik Bhatt
2020-05-02  2:32 ` [PATCH v4 6/8] bus: mhi: core: Return appropriate error codes for AMSS load failure Bhaumik Bhatt
2020-05-02  2:32 ` [PATCH v4 7/8] bus: mhi: core: Improve debug logs for loading firmware Bhaumik Bhatt
2020-05-02  2:32 ` Bhaumik Bhatt [this message]
2020-05-04 14:33   ` [PATCH v4 8/8] bus: mhi: core: Ensure non-zero session or sequence ID values are used Jeffrey Hugo
2020-05-05  2:32     ` bbhatt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1588386725-1165-9-git-send-email-bbhatt@codeaurora.org \
    --to=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mani@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox