From: Krzysztof Kozlowski <krzk@kernel.org>
To: Mark Brown <broonie@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Wolfram Sang <wsa@kernel.org>,
kernel@pengutronix.de, Krzysztof Kozlowski <krzk@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths
Date: Mon, 15 Jun 2020 10:07:17 +0200 [thread overview]
Message-ID: <1592208439-17594-1-git-send-email-krzk@kernel.org> (raw)
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
dspi_interrupt() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
$ echo 4002d000.spi > /sys/devices/platform/soc/40000000.bus/4002d000.spi/driver/unbind
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8887f02c
Internal error: : 1008 [#1] ARM
CPU: 0 PID: 136 Comm: sh Not tainted 5.7.0-next-20200610-00009-g5c913fa0f9c5-dirty #74
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(regmap_mmio_read32le) from [<8061885c>] (regmap_mmio_read+0x48/0x68)
(regmap_mmio_read) from [<8060e3b8>] (_regmap_bus_reg_read+0x24/0x28)
(_regmap_bus_reg_read) from [<80611c50>] (_regmap_read+0x70/0x1c0)
(_regmap_read) from [<80611dec>] (regmap_read+0x4c/0x6c)
(regmap_read) from [<80678ca0>] (dspi_interrupt+0x3c/0xa8)
(dspi_interrupt) from [<8017acec>] (free_irq+0x26c/0x3cc)
(free_irq) from [<8017dcec>] (devm_irq_release+0x1c/0x20)
(devm_irq_release) from [<805f98ec>] (release_nodes+0x1e4/0x298)
(release_nodes) from [<805f9ac8>] (devres_release_all+0x40/0x60)
(devres_release_all) from [<805f5134>] (device_release_driver_internal+0x108/0x1ac)
(device_release_driver_internal) from [<805f521c>] (device_driver_detach+0x20/0x24)
Fixes: 349ad66c0ab0 ("spi:Add Freescale DSPI driver for Vybrid VF610 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
This is an follow up of my other patch for I2C IMX driver [1]. Let's fix the
issues consistently.
[1] https://lore.kernel.org/lkml/1592130544-19759-2-git-send-email-krzk@kernel.org/T/#u
Changes since v1:
1. Disable the IRQ instead of using non-devm interface.
---
drivers/spi/spi-fsl-dspi.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 58190c94561f..023e05c53b85 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1400,7 +1400,7 @@ static int dspi_probe(struct platform_device *pdev)
ret = dspi_request_dma(dspi, res->start);
if (ret < 0) {
dev_err(&pdev->dev, "can't get dma channels\n");
- goto out_clk_put;
+ goto disable_irq;
}
}
@@ -1415,11 +1415,14 @@ static int dspi_probe(struct platform_device *pdev)
ret = spi_register_controller(ctlr);
if (ret != 0) {
dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
- goto out_clk_put;
+ goto disable_irq;
}
return ret;
+disable_irq:
+ if (dspi->irq > 0)
+ disable_irq(dspi->irq);
out_clk_put:
clk_disable_unprepare(dspi->clk);
out_ctlr_put:
@@ -1435,6 +1438,8 @@ static int dspi_remove(struct platform_device *pdev)
/* Disconnect from the SPI framework */
dspi_release_dma(dspi);
+ if (dspi->irq > 0)
+ disable_irq(dspi->irq);
clk_disable_unprepare(dspi->clk);
spi_unregister_controller(dspi->ctlr);
--
2.7.4
next reply other threads:[~2020-06-15 8:08 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-15 8:07 Krzysztof Kozlowski [this message]
2020-06-15 8:07 ` [PATCH v2 2/3] spi: spi-fsl-dspi: Initialize completion before possible interrupt Krzysztof Kozlowski
2020-06-15 8:07 ` [PATCH v2 3/3] genirq: Do not test disabled IRQs with DEBUG_SHIRQ Krzysztof Kozlowski
2020-06-15 12:08 ` Mark Brown
2020-06-16 10:11 ` Krzysztof Kozlowski
2020-06-16 10:39 ` Mark Brown
2020-06-17 9:30 ` Thomas Gleixner
2020-06-15 8:17 ` [PATCH v2 1/3] spi: spi-fsl-dspi: Fix external abort on interrupt in exit paths Marc Kleine-Budde
2020-06-15 9:23 ` Vladimir Oltean
2020-06-15 13:08 ` Krzysztof Kozlowski
2020-06-15 12:30 ` Mark Brown
2020-06-15 12:56 ` Vladimir Oltean
2020-06-15 13:10 ` Mark Brown
2020-06-15 13:12 ` Vladimir Oltean
2020-06-15 13:24 ` Mark Brown
2020-06-15 13:29 ` Vladimir Oltean
2020-06-15 13:36 ` Mark Brown
2020-06-15 13:41 ` Krzysztof Kozlowski
2020-06-15 14:23 ` Vladimir Oltean
2020-06-15 14:57 ` Krzysztof Kozlowski
2020-06-15 14:59 ` Vladimir Oltean
2020-06-15 13:10 ` Krzysztof Kozlowski
2020-06-15 13:14 ` Vladimir Oltean
2020-06-15 13:28 ` Krzysztof Kozlowski
2020-06-15 13:33 ` Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592208439-17594-1-git-send-email-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=broonie@kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=vladimir.oltean@nxp.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox