Re: [PATCH V2 0/6] Add frequency / voltage scaling support for IPQ6018 SoC

Kathiravan T
2020-07-07T13:24:46Z

Hi Bjorn, Can you help to review the below patches in this series?

dt-bindings: soc: qcom: Add IPQ6018 compatible
soc: qcom: smd-rpm: Add IPQ6018 compatible

Hi Rob, Can you help to review the YAML schema in this series?

Thanks,

Kathiravan T.

On 6/23/2020 10:47 AM, Kathiravan T wrote:
> IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator of MP5496
> controls the APSS and SDCC voltage scaling respectively. Add support
> for the same.
>
> changes since V1:
> - Moved YAML conversion to the last as per Mark's comments
>
> Kathiravan T (6):
> dt-bindings: soc: qcom: Add IPQ6018 compatible
> soc: qcom: smd-rpm: Add IPQ6018 compatible
> dt-bindings: regulator: add MP5496 regulator compatible
> regulator: qcom_smd: Add MP5496 regulators
> dt-bindings: soc: qcom: convert the SMD-RPM document to YAML schema
> dt-bindings: regulator: convert QCOM SMD-RPM regulator document to
> YAML schema
>
> .../bindings/regulator/qcom,smd-rpm-regulator.txt | 320 ---------------------
> .../bindings/regulator/qcom,smd-rpm-regulator.yaml | 106 +++++++
> .../devicetree/bindings/soc/qcom/qcom,smd-rpm.txt | 62 ----
> .../devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml | 92 ++++++
> drivers/regulator/qcom_smd-regulator.c | 34 +++
> drivers/soc/qcom/smd-rpm.c | 1 +
> 6 files changed, 233 insertions(+), 382 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
> delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
>