public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Stanley Chu <stanley.chu@mediatek.com>
To: Bean Huo <huobean@gmail.com>
Cc: <alim.akhtar@samsung.com>, <avri.altman@wdc.com>,
	<asutoshd@codeaurora.org>, <jejb@linux.ibm.com>,
	<martin.petersen@oracle.com>, <beanhuo@micron.com>,
	<bvanassche@acm.org>, <tomas.winkler@intel.com>,
	<cang@codeaurora.org>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/3] scsi: ufs: Add "wb_on" sysfs node to control WB on/off
Date: Mon, 7 Dec 2020 14:55:00 +0800	[thread overview]
Message-ID: <1607324100.3580.10.camel@mtkswgap22> (raw)
In-Reply-To: <20201206101335.3418-2-huobean@gmail.com>

On Sun, 2020-12-06 at 11:13 +0100, Bean Huo wrote:
> From: Bean Huo <beanhuo@micron.com>
> 
> Currently UFS WriteBooster driver uses clock scaling up/down to set
> WB on/off, for the platform which doesn't support UFSHCD_CAP_CLK_SCALING,
> WB will be always on. Provide a sysfs attribute to enable/disable WB
> during runtime. Write 1/0 to "wb_on" sysfs node to enable/disable UFS WB.
> 
> Signed-off-by: Bean Huo <beanhuo@micron.com>
> ---
>  drivers/scsi/ufs/ufs-sysfs.c | 40 ++++++++++++++++++++++++++++++++++++
>  drivers/scsi/ufs/ufshcd.c    |  3 +--
>  drivers/scsi/ufs/ufshcd.h    |  2 ++
>  3 files changed, 43 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index 08e72b7eef6a..b3bf7fca00e5 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -189,6 +189,44 @@ static ssize_t auto_hibern8_store(struct device *dev,
>  	return count;
>  }
>  
> +static ssize_t wb_on_show(struct device *dev, struct device_attribute *attr,
> +			  char *buf)
> +{
> +	struct ufs_hba *hba = dev_get_drvdata(dev);
> +
> +	return scnprintf(buf, PAGE_SIZE, "%d\n", hba->wb_enabled);
> +}
> +
> +static ssize_t wb_on_store(struct device *dev, struct device_attribute *attr,
> +			   const char *buf, size_t count)
> +{
> +	struct ufs_hba *hba = dev_get_drvdata(dev);
> +	unsigned int wb_enable;
> +	ssize_t res;
> +
> +	if (ufshcd_is_clkscaling_supported(hba)) {
> +		/* If the platform supports UFSHCD_CAP_AUTO_BKOPS_SUSPEND, turn
> +		 * WB on/off will be done while clock scaling up/down.
> +		 */
> +		dev_warn(dev, "To control WB through wb_on is not allowed!\n");
> +		return -EOPNOTSUPP;
> +	}

Perhaps wb_on shall override clkscaling control. But this could be
future work.

Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>

> +	if (!ufshcd_is_wb_allowed(hba))
> +		return -EOPNOTSUPP;
> +
> +	if (kstrtouint(buf, 0, &wb_enable))
> +		return -EINVAL;
> +
> +	if (wb_enable != 0 && wb_enable != 1)
> +		return -EINVAL;
> +
> +	pm_runtime_get_sync(hba->dev);
> +	res = ufshcd_wb_ctrl(hba, wb_enable);
> +	pm_runtime_put_sync(hba->dev);
> +
> +	return res < 0 ? res : count;
> +}
> +
>  static DEVICE_ATTR_RW(rpm_lvl);
>  static DEVICE_ATTR_RO(rpm_target_dev_state);
>  static DEVICE_ATTR_RO(rpm_target_link_state);
> @@ -196,6 +234,7 @@ static DEVICE_ATTR_RW(spm_lvl);
>  static DEVICE_ATTR_RO(spm_target_dev_state);
>  static DEVICE_ATTR_RO(spm_target_link_state);
>  static DEVICE_ATTR_RW(auto_hibern8);
> +static DEVICE_ATTR_RW(wb_on);
>  
>  static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
>  	&dev_attr_rpm_lvl.attr,
> @@ -205,6 +244,7 @@ static struct attribute *ufs_sysfs_ufshcd_attrs[] = {
>  	&dev_attr_spm_target_dev_state.attr,
>  	&dev_attr_spm_target_link_state.attr,
>  	&dev_attr_auto_hibern8.attr,
> +	&dev_attr_wb_on.attr,
>  	NULL
>  };
>  
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 92d433d5f3ca..30332592e624 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -247,7 +247,6 @@ static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
>  static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag);
>  static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba);
>  static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba);
> -static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
>  static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set);
>  static inline void ufshcd_wb_toggle_flush(struct ufs_hba *hba, bool enable);
>  static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba);
> @@ -5307,7 +5306,7 @@ static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba)
>  				__func__, err);
>  }
>  
> -static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
> +int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
>  {
>  	int ret;
>  	u8 index;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 61344c49c2cc..c61584dff74a 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -1068,6 +1068,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
>  			     u8 *desc_buff, int *buff_len,
>  			     enum query_opcode desc_op);
>  
> +int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
> +
>  /* Wrapper functions for safely calling variant operations */
>  static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
>  {


  parent reply	other threads:[~2020-12-07  6:56 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-06 10:13 [PATCH v2 0/3] Three changes for UFS WriteBooster Bean Huo
2020-12-06 10:13 ` [PATCH v2 1/3] scsi: ufs: Add "wb_on" sysfs node to control WB on/off Bean Huo
2020-12-07  6:51   ` Avri Altman
2020-12-07  6:55   ` Stanley Chu [this message]
2020-12-08  7:13   ` Can Guo
2020-12-08 10:54     ` Bean Huo
2020-12-06 10:13 ` [PATCH v2 2/3] scsi: ufs: Keep device active mode only fWriteBoosterBufferFlushDuringHibernate == 1 Bean Huo
2020-12-07  5:36   ` Stanley Chu
2020-12-07 15:19     ` Stanley Chu
2020-12-07  8:02   ` Avri Altman
2020-12-07 11:18     ` Bean Huo
2020-12-08  9:05       ` Avri Altman
2020-12-08  9:41         ` Bean Huo
2020-12-06 10:13 ` [PATCH v2 3/3] scsi: ufs: Changes comment in the function ufshcd_wb_probe() Bean Huo
2020-12-07  5:19   ` Stanley Chu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1607324100.3580.10.camel@mtkswgap22 \
    --to=stanley.chu@mediatek.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=huobean@gmail.com \
    --cc=jejb@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox