public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Siddharth Gupta <sidgup@codeaurora.org>
To: bjorn.andersson@linaro.org, agross@kernel.org, ohad@wizery.com,
	linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Siddharth Gupta <sidgup@codeaurora.org>,
	psodagud@codeaurora.org, rishabhb@codeaurora.org
Subject: [PATCH 2/3] soc: qcom: mdt_loader: Handle split bins correctly
Date: Wed,  6 Jan 2021 13:23:30 -0800	[thread overview]
Message-ID: <1609968211-7579-3-git-send-email-sidgup@codeaurora.org> (raw)
In-Reply-To: <1609968211-7579-1-git-send-email-sidgup@codeaurora.org>

It may be that the offset of the first program header lies inside the mdt's
filesize, in this case the loader would incorrectly assume that the bins
were not split. The loading would then continue on to fail for split bins.
This change updates the logic used by the mdt loader to understand whether
the firmware images are split or not. It figures this out by checking if
each program header's segment lies within the file or not.

Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
---
 drivers/soc/qcom/mdt_loader.c | 60 +++++++++++++++++++++++++++----------------
 1 file changed, 38 insertions(+), 22 deletions(-)

diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
index 813216d..c9bbd8c 100644
--- a/drivers/soc/qcom/mdt_loader.c
+++ b/drivers/soc/qcom/mdt_loader.c
@@ -31,6 +31,26 @@ static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
 	return true;
 }
 
+static bool qcom_mdt_bins_are_split(const struct firmware *fw)
+{
+	const struct elf32_phdr *phdrs;
+	const struct elf32_hdr *ehdr;
+	uint64_t seg_start, seg_end;
+	int i;
+
+	ehdr = (struct elf32_hdr *)fw->data;
+	phdrs = (struct elf32_phdr *)(ehdr + 1);
+
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		seg_start = phdrs[i].p_offset;
+		seg_end = phdrs[i].p_offset + phdrs[i].p_filesz;
+		if (seg_start > fw->size || seg_end > fw->size)
+			return true;
+	}
+
+	return false;
+}
+
 /**
  * qcom_mdt_get_size() - acquire size of the memory region needed to load mdt
  * @fw:		firmware object for the mdt file
@@ -118,7 +138,7 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len)
 		return ERR_PTR(-ENOMEM);
 
 	/* Is the header and hash already packed */
-	if (ehdr_size + hash_size == fw->size)
+	if (qcom_mdt_bins_are_split(fw))
 		hash_offset = phdrs[0].p_filesz;
 	else
 		hash_offset = phdrs[hash_index].p_offset;
@@ -150,6 +170,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	void *metadata;
 	char *fw_name;
 	bool relocate = false;
+	bool is_split;
 	void *ptr;
 	int ret = 0;
 	int i;
@@ -157,6 +178,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	if (!fw || !mem_region || !mem_phys || !mem_size)
 		return -EINVAL;
 
+	is_split = qcom_mdt_bins_are_split(fw);
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -238,28 +260,22 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 
 		ptr = mem_region + offset;
 
-		if (phdr->p_filesz && phdr->p_offset < fw->size) {
-			/* Firmware is large enough to be non-split */
-			if (phdr->p_offset + phdr->p_filesz > fw->size) {
-				dev_err(dev,
-					"failed to load segment %d from truncated file %s\n",
-					i, firmware);
-				ret = -EINVAL;
-				break;
+		if (phdr->p_filesz) {
+			if (!is_split) {
+				/* Firmware is large enough to be non-split */
+				memcpy(ptr, fw->data + phdr->p_offset, phdr->p_filesz);
+			} else {
+				/* Firmware not large enough, load split-out segments */
+				snprintf(fw_name + fw_name_len - 3, 4, "b%02d", i);
+				ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
+								ptr, phdr->p_filesz);
+				if (ret) {
+					dev_err(dev, "failed to load %s\n", fw_name);
+					break;
+				}
+
+				release_firmware(seg_fw);
 			}
-
-			memcpy(ptr, fw->data + phdr->p_offset, phdr->p_filesz);
-		} else if (phdr->p_filesz) {
-			/* Firmware not large enough, load split-out segments */
-			sprintf(fw_name + fw_name_len - 3, "b%02d", i);
-			ret = request_firmware_into_buf(&seg_fw, fw_name, dev,
-							ptr, phdr->p_filesz);
-			if (ret) {
-				dev_err(dev, "failed to load %s\n", fw_name);
-				break;
-			}
-
-			release_firmware(seg_fw);
 		}
 
 		if (phdr->p_memsz > phdr->p_filesz)
-- 
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-01-06 21:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-06 21:23 [PATCH 0/3] soc: qcom: mdt_loader: General improvements Siddharth Gupta
2021-01-06 21:23 ` [PATCH 1/3] soc: qcom: mdt_loader: Allow hash at any phdr Siddharth Gupta
2021-01-08  0:03   ` Bjorn Andersson
2021-01-06 21:23 ` Siddharth Gupta [this message]
2021-01-08  0:07   ` [PATCH 2/3] soc: qcom: mdt_loader: Handle split bins correctly Bjorn Andersson
2021-01-06 21:23 ` [PATCH 3/3] soc: qcom: mdt_loader: Read hash from firmware blob Siddharth Gupta
2021-01-06 23:41   ` kernel test robot
2021-01-08  0:21   ` Bjorn Andersson
2021-01-13 23:01     ` Siddharth Gupta
2021-01-14 17:46       ` Bjorn Andersson
2021-01-17 23:03         ` Siddharth Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1609968211-7579-3-git-send-email-sidgup@codeaurora.org \
    --to=sidgup@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=psodagud@codeaurora.org \
    --cc=rishabhb@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox