public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kuogee Hsieh <khsieh@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com,
	sean@poorly.run, swboyd@chromium.org
Cc: Kuogee Hsieh <khsieh@codeaurora.org>,
	tanmay@codeaurora.org, abhinavk@codeaurora.org,
	aravindh@codeaurora.org, airlied@linux.ie, daniel@ffwll.ch,
	linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] drm/msm/dp: unplug interrupt missed after irq_hpd handler
Date: Thu,  7 Jan 2021 12:30:25 -0800	[thread overview]
Message-ID: <1610051425-20632-3-git-send-email-khsieh@codeaurora.org> (raw)
In-Reply-To: <1610051425-20632-1-git-send-email-khsieh@codeaurora.org>

There is HPD unplug interrupts missed at scenario of an irq_hpd
followed by unplug interrupts with around 10 ms in between.
Since both AUX_SW_RESET and DP_SW_RESET clear pending HPD interrupts,
irq_hpd handler should not issues either aux or sw reset to avoid
following unplug interrupt be cleared accidentally.

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_aux.c     |  7 -------
 drivers/gpu/drm/msm/dp/dp_catalog.c | 24 ++++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 15 ++++++++++-----
 3 files changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 19b35ae..1c6e1d2 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -336,7 +336,6 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
 	ssize_t ret;
 	int const aux_cmd_native_max = 16;
 	int const aux_cmd_i2c_max = 128;
-	int const retry_count = 5;
 	struct dp_aux_private *aux = container_of(dp_aux,
 		struct dp_aux_private, dp_aux);
 
@@ -378,12 +377,6 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
 	ret = dp_aux_cmd_fifo_tx(aux, msg);
 
 	if (ret < 0) {
-		if (aux->native) {
-			aux->retry_cnt++;
-			if (!(aux->retry_cnt % retry_count))
-				dp_catalog_aux_update_cfg(aux->catalog);
-			dp_catalog_aux_reset(aux->catalog);
-		}
 		usleep_range(400, 500); /* at least 400us to next try */
 		goto unlock_exit;
 	}
diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index 44f0c57..9c0ce98 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -190,6 +190,18 @@ int dp_catalog_aux_clear_hw_interrupts(struct dp_catalog *dp_catalog)
 	return 0;
 }
 
+/**
+ * dp_catalog_aux_reset() - reset AUX controller
+ *
+ * @aux: DP catalog structure
+ *
+ * return: void
+ *
+ * This function reset AUX controller
+ *
+ * NOTE: reset AUX controller will also clear any pending HPD related interrupts
+ * 
+ */
 void dp_catalog_aux_reset(struct dp_catalog *dp_catalog)
 {
 	u32 aux_ctrl;
@@ -483,6 +495,18 @@ int dp_catalog_ctrl_set_pattern(struct dp_catalog *dp_catalog,
 	return 0;
 }
 
+/**
+ * dp_catalog_ctrl_reset() - reset DP controller
+ *
+ * @aux: DP catalog structure
+ *
+ * return: void
+ *
+ * This function reset DP controller
+ *
+ * NOTE: reset DP controller will also clear any pending HPD related interrupts
+ * 
+ */
 void dp_catalog_ctrl_reset(struct dp_catalog *dp_catalog)
 {
 	u32 sw_reset;
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index e3462f5..f96c415 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1296,7 +1296,8 @@ static int dp_ctrl_setup_main_link(struct dp_ctrl_private *ctrl,
 	 * transitioned to PUSH_IDLE. In order to start transmitting
 	 * a link training pattern, we have to first do soft reset.
 	 */
-	dp_catalog_ctrl_reset(ctrl->catalog);
+	if (*training_step != DP_TRAINING_NONE)
+		dp_catalog_ctrl_reset(ctrl->catalog);
 
 	ret = dp_ctrl_link_train(ctrl, cr, training_step);
 
@@ -1491,15 +1492,18 @@ static int dp_ctrl_deinitialize_mainlink(struct dp_ctrl_private *ctrl)
 	return 0;
 }
 
+static void dp_ctrl_link_idle_reset(struct dp_ctrl_private *ctrl)
+{
+	dp_ctrl_push_idle(&ctrl->dp_ctrl);
+	dp_catalog_ctrl_reset(ctrl->catalog);
+}
+
 static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
 {
 	int ret = 0;
 	struct dp_cr_status cr;
 	int training_step = DP_TRAINING_NONE;
 
-	dp_ctrl_push_idle(&ctrl->dp_ctrl);
-	dp_catalog_ctrl_reset(ctrl->catalog);
-
 	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
 
 	ret = dp_ctrl_setup_main_link(ctrl, &cr, &training_step);
@@ -1626,6 +1630,7 @@ void dp_ctrl_handle_sink_request(struct dp_ctrl *dp_ctrl)
 
 	if (sink_request & DP_TEST_LINK_TRAINING) {
 		dp_link_send_test_response(ctrl->link);
+		dp_ctrl_link_idle_reset(ctrl);
 		if (dp_ctrl_link_maintenance(ctrl)) {
 			DRM_ERROR("LM failed: TEST_LINK_TRAINING\n");
 			return;
@@ -1679,7 +1684,7 @@ int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl)
 			break;
 		}
 
-		training_step = DP_TRAINING_NONE;
+		training_step = DP_TRAINING_1;
 		rc = dp_ctrl_setup_main_link(ctrl, &cr, &training_step);
 		if (rc == 0) {
 			/* training completed successfully */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2021-01-07 20:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-07 20:30 [PATCH 0/2] *** fix missing unplug interrupt problem *** Kuogee Hsieh
2021-01-07 20:30 ` [PATCH 1/2] drm/msm/dp: postpone irq_hpd event during connection pending state Kuogee Hsieh
2021-01-11 19:55   ` Stephen Boyd
2021-01-13 17:44     ` khsieh
2021-01-13 20:21       ` Stephen Boyd
2021-01-13 20:22       ` Stephen Boyd
2021-01-13 23:44         ` khsieh
2021-01-14  0:00           ` Stephen Boyd
2021-01-14 17:13             ` khsieh
2021-01-07 20:30 ` Kuogee Hsieh [this message]
2021-01-11 19:54   ` [PATCH 2/2] drm/msm/dp: unplug interrupt missed after irq_hpd handler Stephen Boyd
2021-01-13 17:48     ` khsieh
2021-01-13 20:23       ` Stephen Boyd
2021-01-13 23:46         ` khsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1610051425-20632-3-git-send-email-khsieh@codeaurora.org \
    --to=khsieh@codeaurora.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=aravindh@codeaurora.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    --cc=tanmay@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox