Re: [PATCH v3 1/3] dt-bindings:drm/bridge:anx7625:add HDCP support flag and swing reg

[Rob Herring <robh@kernel.org>]

On Mon, 25 Jan 2021 19:12:21 +0800, Xin Ji wrote:
> Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> flag and DP tx lane0 and lane1 swing register array define.
> 
> Signed-off-by: Xin Ji <xji@analogixsemi.com>
> ---
>  .../bindings/display/bridge/analogix,anx7625.yaml  | 57 ++++++++++++++++++++--
>  1 file changed, 54 insertions(+), 3 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.example.dt.yaml: encoder@58: ports:port@1:endpoint: Additional properties are not allowed ('remote-endpoint' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml

See https://patchwork.ozlabs.org/patch/1431199

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.